Workshop Tools

• 17mm 19mm 21mm & 23mm Sockets.
• Extendable - up to 520mm Long

• ANSI

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• For cars and light commercials
• Pocket clip
• Angled head for access
• Metal body
• 0-50PSI/kpa
• Correct tyre inflation gives more mpg and better braking, also prolongs tyre life

• AWS A5.20 E71T-GS
• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Ideal For Multiple Uses Indoors & Out
• Dries the surface in half the time
• Fast removal of water in one easy pass
• Will not scratch
• Moulds to almost any contour
• Soft silicone flexible blade
• Whisks away surplus water
• T shaped blade

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

• Essential workshop tool
• Air line Whip Hose
• Comes with Tailpiece & adaptor
• 0.6m (2') Long
• 3/8in. x 10mm ID Hose

General Information

Washer Jet Tool (CD) Washer Jet Tool (CD).

• Other end gives a firmer tool for redirecting onto the windscreen
• One screw end reveals fine pin point for cleaning out
• Knurled body gives added grip, complete with a pocket clip
• Suitable for cleaning out blocked washer jets and redirecting
• Double ended washer jet tool

• Supplied in blister pack
• Valve allows trigger-adjustable airflow
• Ergonomically designed handle, for comfort in use

• Maximum Supply Pressure 10 bar / 140 psi
• Connection 1/4 Female
• Air Flow 270 l/min / 9.3 cfm
• Temperature Range 0 to 80 °C
• Grip Style Pistol
• Conical Nozzle Style
• Outlet pressure on blowguns should not exceed 2bar / 28lbf/in²
• It is therefore recommended that an in-line regulator is fitted to your air supply to ensure this.

• Black
• Design helps protect fingers
• Rubber
• Flexible for a smooth contoured finish
• Grips most sheets of wet and dry sanding material

• Locking
• Easy Release
• Heat treated CR-MO jaws and handle material for added strength and durability
• Comfort non-slip grip handle provides less fatigue

• 6in. Long

• 152mm
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Angled

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure
• Lacquer finish for exceptional rust prevention
• Hardened jaws & cutting edges for strength & durability
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure.
• Hardened jaws and cutting edges for strength and durability, lacquer finish for exceptional rust prevention.
• Professional grade pliers are constructed from chrome-moly material and feature comfort grip handles.

• Pliers Combination Slip Joint Pliers 8in.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• High quality hot-forging process provides a performance
• Premium chrome finish to protect against corrosion
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Suitable for the bars with an end on the handle
• Manufactured from CR-MO steel for strength
• Breaker / Power bar head replacement

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• GS/TUV approved
• Anti-slip handle to assist leverage
• Chrome drive socket
• Extends from 35cm (13.5in.) to 52cm (20.5in.).

• CE, ROHS, REACH, GS TUV Compliant

General Information

Hex Bit Set 7mm - 2pc. Hex Bit Set 7mm - 2pc

• 65mm and 92mm long
• Applications for: BMW3/5 with E36 chassis| Ford Mondeo, Fiesta, Alfa Romeo, Vauxhall, Volkswagen, SAAB, Chrysler, BMW Mini etc
• Essential brake service tool
• Two lengths of 7mm Hex Key in 3/8in. drive format for use on brake calipers on BMW 3 Series with E36 chassis

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

• Pack Qty 5
• 1/8in. BSP Gas fitting
• For use with conventional & pneumatic grease gun hosing
• 4 Jaw Grease Gun Connector

• It comes with crimping ability of both insulated and non-insulated wires
• Wire cutter in handle
• Wire crimper for: 22-10 insulated, 22-14 non-insulated, 7-8 mm ignition terminals
• Swivel knob micro-adjusts grip pressure for smaller wire

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistant to oil, grease and most similar contaminants
• Max working pressure 200PSI
• Fitted with the standard 1/4in. BSP female swivel nuts
• Recoils when slack to help keep work areas tidy
• Coiled high strength, flexible UPVC hose

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Pin-less design for increased durability.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Swivel for access In hard to reach places.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Complies with BS EN12645:2014
• Includes integral pocket clip and removable protective cap

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy: 1 psi / 0.1 bar

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• Qty: 50
• Straight Profile
• Imperial Threads

General Information

Oil Filter Wrench 3/8"D - 76mm x 14 Flutes

• Also fits Mazda 2.3 engines and Range Rover Evoque 2.0 petrol
• 3/8in. drive
• Suitable for eco filters on Audi, BMW, Mercedes-Benz, Porsche and Volkswagen

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 6, 12, 24volt
• Spare bulbs Part No 2954 (2)
• CE certificated For automotive use only
• For use on 6V/12V/24V vehicles
• Brass finished circuit tester

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.