Workshop Tools

Title Tampe Star Bit - T55H - 3/8in. Drive Socket

Additional Information

S2 bit material for strength and durability
  • S2 BIT material for strength and durability
  • mirror polish chrome plated CR-V socket resist rust
Carlyle S38T55H 3/8dr T55h Tamper Torx
ONLY
£5.30
Quantity:

Additional Information

Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This Wot-nots Automatic Brake Bleed Tube is made of soft rubber, connects to a bleed valve and has a split the other end allowing fluid to be expelled into a container. The split is normally held below the fluid level in a container to stop air ingress. Brake fluid resistant to stop corrosion when not in use. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Brake bleed tube made of soft rubber, connect to a bleed valve and has a split the other end allowing fluid to be expelled into a container
  • The split is normally held below the fluid level in a container to stop air ingress
  • Brake fluid resistant
Wot-Nots PWN189 Brake Bleed Tube Automatic
ONLY
£5.30
Quantity:
Title Socket Reducer - 3/8in. Male to 1/4in. Female

Additional Information

Socket adaptor used to downsize from one drive to another without the use of another tool
  • Mirror polished Chrome plated finish
  • Plating helps with rust resistance
  • Allows adapting drive sizes
  • Locking function
  • This socket reducer is 3/8in. Male to 1/4in. Female
Carlyle ADP3814 Socket Reducer 3/8dr-1/4dr
ONLY
£5.35
Quantity:
Title Combination Spanner - Metric Spanner - 8 mm

Additional Information

Mirror polish chrome plated finish resists rust, radius cornered offset chamfered box end provides precise fastener control, Spanner features 6-Point, 15 degree angled open end for greater access
  • Mirror polished Chrome plated finish
  • 12 Point
  • Radius cornered offset chamfered box end provides precise fastener control
  • 15 degree angled open end for greater access
Carlyle CWFP108M 8mm 12 Pt Full Polish Combo Wrench
ONLY
£5.37
Quantity:
Title Socket - Shallow - Metric Standard - 1/4in. Dr - 5.5 mm

Additional Information

  • Deep rolled stamped vertical knurling make the right tool easy to identify
  • Full polish chrome finish provides rust resistance
  • Standard non-impact socket
  • Meets or exceeds all ANSI/ASME standards
  • Deep rolled stamped markings provide easy identification
Carlyle S140055M 1/4dr 6pt Chrome Socket 5.5mm
ONLY
£5.46
Quantity:
Title Socket Adapter - Coupler - 1/4in. Drive

Additional Information

Features mirror polished chrome-plated finish for rust resistance
  • Standard non-impact socket adapter
  • Meets or exceeds all ANSI/ASME standards
  • Deep rolled stamped markings provide easy identification
  • Polished chrome outer finish
  • 1in. long
Carlyle ADP14S14H 1/4 Inch Drive Coupler Adaptor
ONLY
£5.48
Quantity:
Title Car Dust Caps With Key - Chrome Metal - Pack Of 4

Additional Information

Dust caps are an essential tool to not only prevent your tyres from losing pressure, but also to prevent dirt and grime from entering the valve. Over time they can get damaged, lost or even stolen which can be an annoyance. This is where Wott-Nots range of dust caps can be the solution to your problem. This pack of Wot-Nots Chrome Car Dust Caps with key are used to stop dirt entering the schrader valve on tyres. These dust caps are supplied in chrome metal and can be used on cycles, cars, caravans and a variety of other applications. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • These caps are used to stop dirt entering the schrader valve on tyres
  • Supplied in Chrome can be used on cycles
  • Standard thread
Wot-Nots PWN175 Tyre Vlve Mtl Dst Caps With Key X 4
ONLY
£5.49
Quantity:
Title Extension Socket - 1/4in. Dr - 3in. Long

Additional Information

Features mirror polish chrome-plated finish for rust resistance. Extension allows easier access in hard-to-reach areas
  • Mirror polished Chrome plated finish
  • Chrome Vanadium
  • 1/4in. Drive
  • 3in. Long
  • .073 lbs
Carlyle EXT1403 1/4dr 75mm Chrome Extension
ONLY
£5.59
Quantity:
Title Socket - Shallow - Metric Standard - 3/8in. Dr - 9 mm

Additional Information

  • 6 Point
  • 3/8in. Drive
  • Deep
  • Chrome Vanadium
Carlyle S38009M 3/8dr 9mm 6pt Chrome Socket
ONLY
£5.59
Quantity:
Title Socket - Tamper Proof 5 Star Plus - 3/8in. Dr - TS45H

Additional Information

Precision designed long star tips ensure accurate fastener fit
  • Polished Chrome
  • Non-Impact
  • 3/8 in. Drive
  • Zinc phosphate bit finish for strength and durability
Carlyle S38TS45H 3/8dr Ts45h 5 Star Tamper Proof
ONLY
£5.59
Quantity:
Title Socket - Tamper Proof 5 Star Plus - 3/8in. Dr - TS50H

Additional Information

Precision designed long star tips ensure accurate fastener fit
  • Polished Chrome
  • Non-Impact
  • 3/8 in. Drive
  • Zinc phosphate bit finish for strength and durability
Carlyle S38TS50H 3/8dr Ts50h 5 Star Tamper Proof
ONLY
£5.59
Quantity:
Title Tyre Valve Cores - Short 43mm - Pack Of 4

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 4 Wot-Nots tyre valve cores are normal length 43mm valves. They can be used on some cycles but are more suited to cars, vans and motorcycles. This is an ideal replacement for an old core that might be causing slow punctures or has a broken nozzle. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
  • Tyre valve cores
  • Normal length 43mm valves
  • Can be used on some cycles
Wot-Nots PWN172 Tyre Valve Cores Short X 4
ONLY
£5.59
Quantity:
Title Tampe Star Bit - T27H - 1/4in. Drive Socket

Additional Information

S2 bit material for strength and durability
  • S2 BIT material for strength and durability
  • mirror polish chrome plated CR-V socket resist rust
Carlyle S14T27H 1/4dr T27h Tamper Torx
ONLY
£5.60
Quantity:
Title Tampe Star Bit - T8H - 1/4in. Drive Socket

Additional Information

S2 bit material for strength and durability
  • S2 BIT material for strength and durability
  • mirror polish chrome plated CR-V socket resist rust
Carlyle S14T8H 1/4dr T8h Tamper Torx
ONLY
£5.60
Quantity:
Title Combination Spanner - Metric Spanner - 10 mm

Additional Information

Mirror polish chrome plated finish resists rust, radius cornered offset chamfered box end provides precise fastener control, Spanner features 6-Point, 15 degree angled open end for greater access
  • Mirror polished Chrome plated finish
  • 12 Point
  • Radius cornered offset chamfered box end provides precise fastener control
  • 15 degree angled open end for greater access
Carlyle CWFP110M 10mm 12 Pt Full Polish Combo Wrench
ONLY
£5.64
Quantity:
Title Tyre Tread Depth Gauge - Analogue

Additional Information

Ensure that your vehicles tyres are both safe and legal when driving with this Tyre Depth Gauge by Streetwize. Lightweight and super easy to use, the gauge gives accurate readings that you can trust. Supplied by Streetwize Accessories, the UK's leading supplier of automotive and leisure accessories. We have over 40 years experience in supplying handy accessories for your car, van, motorhome, caravan and home!
  • Sturdy metal construction
  • Gives accurate readings
  • Check your tyre tread depth on a regular basis
  • CE, ROHS, REACH, GS TUV Compliant
Streetwize SW3237 Tyre Depth Gauge
ONLY
£5.64
Quantity:
Title 1/4 Drive Socket Metric Deep-7MM

Additional Information

1/4 Drive Socket - Metric Deep - 7 mm
  • Wrench ready FOUR FLAT™ sides.
  • FOUR FLAT™ sides on socket deter rolling.
  • Stamped sizes for easy visibility.
  • Chrome finish.
Milwaukee 4932478327 1/4 Drive Socket Metric Deep7mm
ONLY
£5.65
Quantity:
Title Standard Adaptor Socket - Female Thread

Additional Information

  • Used in most workshop/garage environments
  • Wide choice of thread and hose tail sizes
  • Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
  • Case hardened for longer life
  • Female Thread Rp 1/4
Pcl Standard Adaptor Female Thread Rp 1/4 Aca2746S
ONLY
£5.69
Quantity:
Title Socket - Shallow - Metric Standard - 1/4in. Dr - 6 mm

Additional Information

  • Deep rolled stamped vertical knurling make the right tool easy to identify
  • Full polish chrome finish provides rust resistance
  • Standard non-impact socket
  • Meets or exceeds all ANSI/ASME standards
  • Deep rolled stamped markings provide easy identification
Carlyle S14006M 1/4dr 6pt Chrome Socket 6mm
ONLY
£5.71
Quantity:
Title Socket - Shallow - Metric Standard - 1/2in. Dr - 10 mm

Additional Information

Radius cornered 6-point socket design reduces bolt/nut wear and improves socket grip
  • Full polish chrome finish provides rust resistance
  • Non-Impact
  • 1/2 in. Drive
  • 6 Points
Carlyle S12010M 1/2dr 10mm 6pt Chrome Socket
ONLY
£5.72
Quantity:
Title Socket - Shallow - Metric Standard - 3/8in. Dr - 16 mm

Additional Information

Radius cornered 6-point socket design reduces bolt / nut wear, and improves socket grip. Full polish chrome finish provides rust resistance.
  • 6 Point
  • 3/8in. Drive
  • Deep
  • Chrome Vanadium
Carlyle S38016M 3/8dr 16mm 6pt Chrome Socket
ONLY
£5.76
Quantity:
Title Junior Hacksaw Blades - Pack Of 10

Additional Information

  • Fits Junior sized hacksaws
  • 10pc
  • Consumable
Laser 0252 Hacksaw Blades - Junior X 10
ONLY
£5.79
Quantity:
Title Tampe Star Bit - T50H - 3/8in. Drive Socket

Additional Information

S2 bit material for strength and durability
  • S2 BIT material for strength and durability
  • mirror polish chrome plated CR-V socket resist rust
Carlyle S38T50H 3/8dr T50h Tamper Torx
ONLY
£5.81
Quantity:
Part number: 0496
Title Slimline Padlock - 25mm

Additional Information

  • Slimline design
  • Manufactured from brass
  • Supplied with 3 keys
Laser 0496 Padlock 25mm
ONLY
£5.81
Quantity:
Title External Star - E4 - 1/4in. Drive Socket

Additional Information

S2 bit material for strength and durability
  • Polished Chrome
  • Non-Impact
Carlyle S14E4 1/4dr E4 E Torx Socket
ONLY
£5.84
Quantity:
Title External Star - E7 - 1/4in. Drive Socket

Additional Information

S2 bit material for strength and durability
  • Polished Chrome
  • Non-Impact
Carlyle S14E7 1/4dr E7 E Torx Socket
ONLY
£5.84
Quantity:
Part number: CWFP111M
Title Combination Spanner - Metric Spanner - 11 mm

Additional Information

Mirror polish chrome plated finish resists rust, radius cornered offset chamfered box end provides precise fastener control, Spanner features 6-Point, 15 degree angled open end for greater access
  • Mirror polished Chrome plated finish
  • 12 Point
  • Radius cornered offset chamfered box end provides precise fastener control
  • 15 degree angled open end for greater access
Carlyle CWFP111M Spanners & Wrenches
ONLY
£5.85
Quantity:
Part number: 2985
Title Star Bit - T45 - 3/8in. Drive

Additional Information

  • Impact quality
  • One piece forging for strength
  • Black finished chrome vanadium
  • 3/8in. drive
  • T40-T60 sizes available
Laser 2985 Star Bit T45
ONLY
£5.85
Quantity:
Title 3/8 Drive Socket Metric Deep-13MM

Additional Information

3/8 Drive Socket - Metric Deep - 13 mm
  • Wrench ready FOUR FLAT™ sides.
  • FOUR FLAT™ sides on socket deter rolling.
  • Stamped sizes for easy visibility.
  • Chrome finish.
Milwaukee 4932478357 3/8 Drive Socket Metric Deep13mm
ONLY
£5.86
Quantity:
Title Socket Holder Rail 1/4in.

Additional Information

Socket Holder Rail 1/4in.
  • 15in. polypropylene plastic storage rail.
  • Used to store sockets and bit sockets.
  • Blue color rail denotes metric sizes.
  • Socket Holder Rail 1/4in.
Carlyle SR15B 15in Socket Rail - Blue
ONLY
£5.88
Quantity:

Page 3 of 40
Workshop Tools

Your feedback more
Trusted reviews more
Secure payments more
Simple returns more