Proud to be a UK-based company
Contact usCar Parts & Accessories by Hella
Categories
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 135 mm |
| Height | 28 mm |
| Width | 23 mm |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Glued |
| Quantity | 1 |
| Cable Length | 250 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | Yellow |
| Registration Type | CCC approved |
| Fastening Type | for horizontal fastening |
| Power Consumption | 1.0 W |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 2 |
| LED Colour | Yellow |
| Type | Side Marker Light |
| Fulfils ECE norm | R91, R3 |
| Function | Side Marker Light |
£20.30
Important compatibility info
| Placement on Vehicle | Left |
| Light Function | with indicator, with stop light, with number plate light, with rear fog light, with reverse light, with taillight |
| Number of light functions | 6 |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
£20.19
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | with pipe, Electromagnetic Compatibility (EMC) |
| Voltage | 12 V. 24 V |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with number plate light (LED) |
| Housing Colour | White |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 36 |
| Cable Length | 1300 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 2 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£20.12
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | with pipe, Electromagnetic Compatibility (EMC) |
| Voltage | 12 V. 24 V |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with number plate light (LED) |
| Housing Colour | White |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 36 |
| Cable Length | 1300 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Protection Type (IP Code) | IP5K9K |
| Number of LEDs | 2 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£20.12
Important compatibility info
| Placement on Vehicle | Rear Fitting |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with marker lamp (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting |
| Quantity | 16 |
| Cable Length | 500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Power Consumption | 0.5 W |
| Number of LEDs | 2 |
| LED Colour | Red |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£20.06
Important compatibility info
| Placement on Vehicle | Left |
| Height | 51 mm |
| Width | 64 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V. 12 V |
| Paired article numbers | 2SE 997 111-021 |
| Bulb Type | R10W, P21W |
| Light Function | with number plate light, with stop light, with indicator, with taillight |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Number of light functions | 4 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Red/Yellow, White |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP5KX, IPX9K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL997451-001)
£19.75
Important compatibility info
| Placement on Vehicle | Left |
| Height | 51 mm |
| Width | 64 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V. 12 V |
| Paired article numbers | 2SE 997 111-021 |
| Bulb Type | R10W, P21W |
| Light Function | with number plate light, with stop light, with indicator, with taillight |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Number of light functions | 4 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Red/Yellow, White |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP5KX, IPX9K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL997451-001)
£19.75
Important compatibility info
£19.61
Important compatibility info
£19.61
Important compatibility info
| Placement on Vehicle | Right |
| Light Function | with indicator, with stop light, with number plate light, with reverse light, with taillight |
| Number of light functions | 5 |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
£19.53
Important compatibility info
| Placement on Vehicle | Right Front, Left Front, Left, Right |
| Length | 71 mm |
| Height | 63 mm |
| Width | 63 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V |
| Bulb Type | R5W |
| Light Function | with position light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 4 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Fastening Type | for vertical fastening |
| Power Consumption | 5 W |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
Additional Information
- 1x Hella Lens, position light (9EL108435-001)
£19.36
Important compatibility info
| Registration Type | CCC approved |
| Light Design | Halogen |
| Fastening Type | for horizontal fastening |
| Additional Information | without bulb |
| Light Function | with indicator |
| Mounting Type | mounting, Screw Connection |
| Number of light functions | 1 |
| Type | Auxiliary Direction Indicator |
| Function | Auxiliary Direction Indicator |
| Placement on Vehicle | Right, Lateral Mounting |
| Bulb Type | P21W |
| Lens Colour | Yellow |
| Colour | Yellow |
| Length | 140 mm |
| Cable Length | 635 mm |
| Height | 48 mm |
| Width | 51 mm |
| Quantity | 24 |
| Voltage | 24 V. 12 V |
| Conductor Number | 2 conductor |
| Plug Type | AMP |
| Fulfils ECE norm | R6 |
£19.35
Important compatibility info
| Registration Type | CCC approved |
| Light Design | Halogen |
| Fastening Type | for horizontal fastening |
| Additional Information | without bulb |
| Light Function | with indicator |
| Mounting Type | mounting, Screw Connection |
| Number of light functions | 1 |
| Type | Auxiliary Direction Indicator |
| Function | Auxiliary Direction Indicator |
| Placement on Vehicle | Right, Lateral Mounting |
| Bulb Type | P21W |
| Lens Colour | Yellow |
| Colour | Yellow |
| Length | 140 mm |
| Cable Length | 635 mm |
| Height | 48 mm |
| Width | 51 mm |
| Quantity | 24 |
| Voltage | 24 V. 12 V |
| Conductor Number | 2 conductor |
| Plug Type | AMP |
| Fulfils ECE norm | R6 |
£19.35
Important compatibility info
| Operating Mode | Electric |
| Function | Actuator, headlight levelling |
| Registration Type | ECE approved |
| Type | Actuator, headlight levelling |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 12 V |
£19.26
Important compatibility info
| Operating Mode | Electric |
| Function | Actuator, headlight levelling |
| Registration Type | ECE approved |
| Type | Actuator, headlight levelling |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 12 V |
£19.26
Important compatibility info
| Placement on Vehicle | Rear Fitting |
| Additional Information | with gasket/seal |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with taillight, with marker lamp (LED) |
| Light Design | LED |
| Mounting Type | Fitting |
| Quantity | 30 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Number of LEDs | 2 |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£19.20
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Fitting |
| Number of light functions | 1 |
| Lens Colour | Yellow |
| Fastening Type | for vertical fastening, for horizontal fastening |
| Type | Direction Indicator |
| Function | Direction Indicator |
Additional Information
- 1x Hella Lens, direction indicator (9EL119544-021)
£19.02
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting, Fitting |
| Number of light functions | 1 |
| Lens Colour | Yellow |
| Fastening Type | for vertical fastening, for horizontal fastening |
| Type | Direction Indicator |
| Function | Direction Indicator |
Additional Information
- 1x Hella Lens, direction indicator (9EL119544-021)
£19.02
Important compatibility info
| Placement on Vehicle | Left, Right |
| Additional Information | without bulb holder |
| Bulb Type | P21W, R10W |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with reflector, with taillight |
| Light Design | Halogen |
| Number of light functions | 6 |
| Registration Type | ECE approved, ADR/GGVS approved |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
Additional Information
Brief Information
*** Original spare part
£18.24
Important compatibility info
| Additional Information | with nuts |
| Number of Connectors / Ports | 2 |
| Mounting Type | Bolted |
| Port/Connecting thread | M10 |
| Thread Pitch | 1.5 mm |
| Current Strength | 50 A |
| Combi Switch Function | Normally Open Contact |
| DIN / ISO | 40050-IPX2 |
| Control Type | Rotary Operation |
| Capacity at 12V | max 1000A/10 sek/12V |
| Type | Main Switch, battery |
| Function | Main Switch, battery |
Additional Information
- 1x Hella Key (9SL706729-011)
- 1x Hella Key (9SL706729-031)
£18.22
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with side marker light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Screw Connection, mounting |
| Quantity | 50 |
| Cable Length | 180 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | Yellow |
| Registration Type | CCC approved, ADR/GGVS approved |
| Fastening Type | for vertical fastening |
| Plug Type | AMP |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | Yellow |
| Type | Side Marker Light |
| Fulfils ECE norm | R3, R91 |
| Function | Side Marker Light |
£17.44
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 139 mm |
| Width | 116 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | P21W |
| Light Function | with reverse light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for vertical fastening, for horizontal fastening |
| Plug Type | Blade Terminal |
| Type | Reverse Light |
| Fulfils ECE norm | R23 |
| Function | Reverse Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, reverse light (9EL119544-111)
£17.03
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 139 mm |
| Width | 116 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | P21W |
| Light Function | with reverse light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for vertical fastening, for horizontal fastening |
| Plug Type | Blade Terminal |
| Type | Reverse Light |
| Fulfils ECE norm | R23 |
| Function | Reverse Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, reverse light (9EL119544-111)
£17.03
Important compatibility info
| Additional Information | with bulb |
| Voltage | 12 V |
| Bore Diameter | 14.5 mm |
| Bulb Type | W1,2W |
| Number of Connectors / Ports | 3 |
| Light Design | Halogen |
| Mounting Type | Bolted |
| Combi Switch Function | On/Off Switch |
| Control Type | Pull Actuation |
| Capacity at 12V | 8A |
| Capacity at 24V | 4A |
| Switch Lighting | Green, Orange, Red |
| Type | Switch |
| Function | Switch |
Additional Information
- 1x Hella Bulb (8GP002095-121)
£16.81
Important compatibility info
| Mounting Type | Fitting |
| Voltage | 24 V |
| Colour Frontring | Green |
| Function | Cigarette Lighter |
| Type | Cigarette Lighter |
| Plug Type | Blade Terminal |
| Capacity at 24V | 5A |
| Fastening Type | Clamping sleeve |
£16.80
Important compatibility info
| Additional Information | with gaskets/seals |
| Opening Temperature | 81 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
£16.47
Important compatibility info
| Additional Information | with gaskets/seals |
| Opening Temperature | 81 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
£16.47
Important compatibility info
| Placement on Vehicle | Front |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe, Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, SAE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Plug Type | open cable ends |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R3, R7 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£16.21
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 106 mm |
| Height | 45 mm |
| Additional Information | without bulb |
| Voltage | 12 V |
| Bulb Type | P21W |
| Light Function | with rear fog light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | Red |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Plug Type | Blade Terminal |
| Type | Rear Fog Light |
| Fulfils ECE norm | R38 |
| Function | Rear Fog Light |
£16.14
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 106 mm |
| Height | 45 mm |
| Additional Information | without bulb |
| Voltage | 12 V |
| Bulb Type | P21W |
| Light Function | with rear fog light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | Red |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Plug Type | Blade Terminal |
| Type | Rear Fog Light |
| Fulfils ECE norm | R38 |
| Function | Rear Fog Light |
£16.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023