Proud to be a UK-based company
Contact usCar Parts & Accessories by Hella
Categories
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 3 -pin connector |
| Mounting Type | Fitting |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| for PR number | 7X1 |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£23.47
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 3 -pin connector |
| Mounting Type | Fitting |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| for PR number | 7X1 |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£23.47
Important compatibility info
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved, SAE approved, ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Brief Information
*** Original spare part
- 1x Hella Licence Plate Light (2KA010278-181)
£23.43
Important compatibility info
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved, SAE approved, ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Brief Information
*** Original spare part
- 1x Hella Licence Plate Light (2KA010278-181)
£23.43
Important compatibility info
| Placement on Vehicle | Front, Rear |
| Number of Poles | 3 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£23.36
Important compatibility info
| Placement on Vehicle | Front, Rear |
| Number of Poles | 3 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£23.36
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 140 mm |
| Height | 52 mm |
| Width | 78 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Colour | yellow (amber) |
| Bulb Type | P21W |
| Light Function | with indicator |
| Light Design | Halogen |
| Mounting Type | Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | SAE approved |
| Fastening Type | for horizontal fastening |
| Conductor Number | 2 conductor |
| Plug Type | Male |
| Type | Auxiliary Direction Indicator |
| Fulfils ECE norm | R6 |
| Function | Auxiliary Direction Indicator |
£23.22
Important compatibility info
| Placement on Vehicle | Front, Rear |
| Additional Information | with gasket/seal |
| Number of Poles | 3 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£23.16
Important compatibility info
| Placement on Vehicle | Front, Rear |
| Additional Information | with gasket/seal |
| Number of Poles | 3 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£23.16
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 140 mm |
| Height | 80 mm |
| Additional Information 2 | without bulbs, with bolts/screws, without indicator failure control |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W, R5W |
| Light Function | with indicator, with stop light, with taillight |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Number of light functions | 3 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Red/Yellow |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP5K4K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL113324-001)
- 1x Hella Lamp Base (9FT998007-011)
£23.10
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 140 mm |
| Height | 80 mm |
| Additional Information 2 | without bulbs, with bolts/screws, without indicator failure control |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W, R5W |
| Light Function | with indicator, with stop light, with taillight |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Number of light functions | 3 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Red/Yellow |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP5K4K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL113324-001)
- 1x Hella Lamp Base (9FT998007-011)
£23.10
Important compatibility info
£23.02
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Screw Connection, mounting |
| Quantity | 1 |
| Cable Length | 300 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R91, R3 |
| Function | Side Marker Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£23.00
Important compatibility info
| Placement on Vehicle | Left, Lateral Installation |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W |
| Light Function | with indicator |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved, SAE approved |
| Type | Auxiliary Direction Indicator |
| Function | Auxiliary Direction Indicator |
Additional Information
- 1x Hella Lens, direction indicator (9EL115830-001)
£22.87
Important compatibility info
| Placement on Vehicle | Front |
| Length | 111 mm |
| Height | 21 mm |
| Width | 51 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED), with reflector |
| Housing Colour | White |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Lens Colour | White |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 1.2 W |
| Protection Type (IP Code) | IP5KX |
| Number of LEDs | 2 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R7, R3 |
| Function | Position Light |
| Moisture protection | Waterproof to IP65 |
£22.77
Important compatibility info
£22.74
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 111 mm |
| Height | 43 mm |
| Width | 51 mm |
| Additional Information | with holder |
| Voltage | 12 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 0.6 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 2 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R3, R91 |
| Function | Side Marker Light |
£22.65
Important compatibility info
| Additional Information | with holder |
| Additional Information 2 | for trailer |
| Number of Poles | 4 -pin connector |
| Operating Mode | Electronic |
| Mounting Type | Plugged |
| Switching Capacity | 2+1(6)x21W+5 EP W |
| Temperature range from | -40 °C |
| Temperature range to | +85 °C |
| Function | Flasher Unit |
| Voltage | 12 V |
| Registration Type | ECE approved |
| Type | Flasher Unit |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£22.65
Important compatibility info
| Additional Information | with holder |
| Additional Information 2 | for trailer |
| Number of Poles | 4 -pin connector |
| Operating Mode | Electronic |
| Mounting Type | Plugged |
| Switching Capacity | 2+1(6)x21W+5 EP W |
| Temperature range from | -40 °C |
| Temperature range to | +85 °C |
| Function | Flasher Unit |
| Voltage | 12 V |
| Registration Type | ECE approved |
| Type | Flasher Unit |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£22.65
Important compatibility info
| Voltage | 12 V. 24 V |
| Light Function | with position light (LED) |
| Cable Length | 500 mm |
| Number of light functions | 1 |
| Registration Type | ECE approved, ADR/GGVS approved |
| Number of LEDs | 1 |
| Type | Position Light |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£22.40
Important compatibility info
| Light Function | for position light |
| Light Design | Bi-Xenon |
| Placement on Vehicle | Left, Right |
| Additional Information | with bulb |
| Bulb Type | H10W |
| Function | Reflector, position/end outline marker light |
| Type | Reflector, position/end outline marker light |
| Rated Power | 10 W |
Additional Information
- 1x Hella Bulb, park/position light (8GH002473-191)
£22.15
Important compatibility info
| Function | Actuator, headlight levelling |
| Type | Actuator, headlight levelling |
| Operating Mode | Electric |
| Light Design | Halogen |
| Voltage | 12 V |
£22.02
Important compatibility info
| Function | Actuator, headlight levelling |
| Type | Actuator, headlight levelling |
| Operating Mode | Electric |
| Light Design | Halogen |
| Voltage | 12 V |
£22.02
Important compatibility info
| Placement on Vehicle | outer, Upper |
| Length | 24 mm |
| Height | 33 mm |
| Width | 83 mm |
| Additional Information 2 | without pipe, with frame |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£21.75
Important compatibility info
| Placement on Vehicle | outer, Upper |
| Length | 24 mm |
| Height | 33 mm |
| Width | 83 mm |
| Additional Information 2 | without pipe, with frame |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£21.75
Important compatibility info
| Placement on Vehicle | Left Front, Right Front |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved |
| Bolt / Nut Version | Banjo Bolt |
| Type | Direction Indicator |
| Function | Direction Indicator |
Additional Information
- 1x Hella Lens, end outline marker light (9EL116907-001)
- 1x Hella Lamp Base (9FT117109-007)
£21.73
Important compatibility info
| Placement on Vehicle | Left Front, Right Front |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved |
| Bolt / Nut Version | Banjo Bolt |
| Type | Direction Indicator |
| Function | Direction Indicator |
Additional Information
- 1x Hella Lens, end outline marker light (9EL116907-001)
- 1x Hella Lamp Base (9FT117109-007)
£21.73
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 111 mm |
| Height | 43 mm |
| Width | 51 mm |
| Additional Information | with holder |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with reflector, with side marker light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | yellow (amber) |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 1.2 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 2 |
| LED Colour | yellow (amber) |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R3, R91 |
| Function | Side Marker Light |
£21.55
Important compatibility info
| Placement on Vehicle | Front, Right, Left |
| Length | 130 mm |
| Height | 16 mm |
| Width | 32 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 300 mm |
| Number of light functions | 2 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Power Consumption | 1 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 1 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R7, R3 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£21.30
Important compatibility info
| Height | 47 mm |
| Additional Information 2 | with lid |
| Number of Poles | 3 -pin connector |
| Bore Diameter | 5.4 mm |
| Colour | Black |
| Mounting Type | Screw Connection |
| Quantity | 1 |
| Current Strength | 25 A |
| Number of Bores | 3 |
| DIN / ISO | 9680 |
| Voltage from | 6 V |
| Plug Type | Screw Contact |
| Voltage to | 42 V |
| Type | Socket |
| Temperature range from | -40 °C |
| Temperature range to | +80 °C |
| Function | Socket |
£21.19
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023