Car Parts & Accessories by Apec
Categories
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 350 mm |
| Manufacturer | FORD |
| Model | MONDEO |
| Outer diameter | 133 mm |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Thickness | 13.8 mm |
Important compatibility info
| Number of Poles | 1 -pin connector |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing material | Aluminium |
| Opening Temperature | 80 °C |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Width | 57 mm |
| Additional Information 2 | with sensor |
| Manufacturer | ABARTH ALFA ROMEO CHRYSLER FIAT JEEP |
| Number of sensors | 1 |
| for OE number | 04892642AC |
Important compatibility info
| Number of Poles | 1 -pin connector |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing material | Aluminium |
| Opening Temperature | 80 °C |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Width | 57 mm |
| Additional Information 2 | with sensor |
| Manufacturer | ABARTH ALFA ROMEO CHRYSLER FIAT JEEP |
| Number of sensors | 1 |
| for OE number | 04892642AC |
Important compatibility info
| Width 1 | 50 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 54 mm |
| Additional Information 2 | with integrated magnetic sensor ring |
| Manufacturer | MERCEDES |
| Outer diameter 1 | 90 mm |
Important compatibility info
| Width 1 | 50 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 54 mm |
| Additional Information 2 | with integrated magnetic sensor ring |
| Manufacturer | MERCEDES |
| Outer diameter 1 | 90 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Important compatibility info
| Manufacturer | CITROEN |
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Model | C4 GRAND PICASSO C4 PICASSO |
Important compatibility info
| Manufacturer | CITROEN |
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Model | C4 GRAND PICASSO C4 PICASSO |
Important compatibility info
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Manufacturer | JAGUAR |
| Model | XF |
| Length 1 | 410 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Manufacturer | JAGUAR |
| Model | XF |
| Length 1 | 410 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Manufacturer | FORD MAZDA VOLVO |
| Placement on Vehicle | in front of axle |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Piston diameter 1 | 57 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Part number of recommended accessories | BBS13, BSC1 |
| for brake disc thickness | 25 mm |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Material | Grey Cast Iron |
Important compatibility info
| Manufacturer | FORD MAZDA VOLVO |
| Placement on Vehicle | in front of axle |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Piston diameter 1 | 57 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Part number of recommended accessories | BBS13, BSC1 |
| for brake disc thickness | 25 mm |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Material | Grey Cast Iron |
Important compatibility info
| Piston diameter 1 | 57 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS13, BSC1 |
| Manufacturer | FORD MAZDA VOLVO |
| for brake disc thickness | 25 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake System | ATE |
| Brake Disc Type | Vented |
| Material | Grey Cast Iron |
| Placement on Vehicle | in front of axle |
Important compatibility info
| Piston diameter 1 | 57 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS13, BSC1 |
| Manufacturer | FORD MAZDA VOLVO |
| for brake disc thickness | 25 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake System | ATE |
| Brake Disc Type | Vented |
| Material | Grey Cast Iron |
| Placement on Vehicle | in front of axle |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 42 mm |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Model | BOXER DUCATO RELAY |
| Outer diameter 1 | 75 mm |
| Width 1 | 60 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 42 mm |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Model | BOXER DUCATO RELAY |
| Outer diameter 1 | 75 mm |
| Width 1 | 60 mm |
Important compatibility info
| Material | Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Model | A1 FABIA IBIZA ROOMSTER |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Placement on Vehicle | Front Axle Left |
| Manufacturer | AUDI SEAT SKODA |
| Paired article numbers | AST2349 |
Important compatibility info
| Material | Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Model | A1 FABIA IBIZA ROOMSTER |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Placement on Vehicle | Front Axle Left |
| Manufacturer | AUDI SEAT SKODA |
| Paired article numbers | AST2349 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Model | A1 FABIA IBIZA ROOMSTER |
| Manufacturer | AUDI SEAT SKODA |
| Paired article numbers | AST2348 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Model | A1 FABIA IBIZA ROOMSTER |
| Manufacturer | AUDI SEAT SKODA |
| Paired article numbers | AST2348 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Placement on Vehicle | Rear Axle Left, Lower, Front |
| Manufacturer | AUDI VOLKSWAGEN |
| Model | Q3 RS Q3 TIGUAN |
| Paired article numbers | AST2471 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Placement on Vehicle | Rear Axle Left, Lower, Front |
| Manufacturer | AUDI VOLKSWAGEN |
| Model | Q3 RS Q3 TIGUAN |
| Paired article numbers | AST2471 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Lower, Front |
| Steering arm type | Trailing Arm |
| Model | Q3 RS Q3 TIGUAN |
| Manufacturer | AUDI VOLKSWAGEN |
| Paired article numbers | AST2470 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Lower, Front |
| Steering arm type | Trailing Arm |
| Model | Q3 RS Q3 TIGUAN |
| Manufacturer | AUDI VOLKSWAGEN |
| Paired article numbers | AST2470 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length 1 | 275 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Brake System | Bosch |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Manufacturer | CITROEN PEUGEOT |
| Model | 407 C5 C6 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length 1 | 275 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Brake System | Bosch |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Manufacturer | CITROEN PEUGEOT |
| Model | 407 C5 C6 |
Important compatibility info
| Type | Mirror Glass, exterior mirror |
| Function | Mirror Glass, exterior mirror |
| Title | APEC Replacement Stick-On Wide Angle Vehicle Mirror Glass LHS |
Additional Information
- Engineered for Durability – APEC Replacement Mirror Glass is constructed using high-quality materials to ensure long-term reliability. Designed to endure the demands of daily driving, it resists weathering, temperature fluctuations, and environmental stressors for consistent performance over time.
- Enhanced Visibility - APEC mirror glass provides distortion-free reflections, offering optimal visibility and safety for you while on the road.
- Vehicle-Specific Compatibility - APEC Replacement Mirror Glass is manufactured to precise OEM specifications for your vehicle’s exact make and model, ensuring accurate alignment, secure fitment, and optimal mirror performance.
- Mirror glass features a blind-spot section to improve visibilty of your vehicle blindspots
- Packaging – Safely packed in eco-friendly cardboard boxes to ensure protection during shipping and easy recycling.
- OEM Quality - Crafted with high-quality materials and manufacturing standards, APEC mirror glass matches the quality of your original mirror glass.
- Simplified Installation – Featuring a pre-applied adhesive backing and tailored to match your vehicle’s original mirror design, APEC Replacement Mirror Glass allows for quick, secure, and tool-free installation - no professional fitting or specialised equipment required.
- Replacement door mirror glass
- high-strength adhesive pad
- convex mirror glass
- precision-cut
- smooth-finished edges
- vehicle-specific
- no tools required
- blind spot
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















