Car Parts & Accessories by Apec
Categories
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Model | 120D 123D 125 |
| Manufacturer | BMW |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Model | 120D 123D 125 |
| Manufacturer | BMW |
Important compatibility info
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| External Teeth, Wheel Side | 25 |
| Diameter | 84 mm |
| Internal Teeth, wheel side | 33 |
| Seal Diameter | 53 mm |
| Model | GRAND SCENIC MEGANE SCENIC |
| Manufacturer | RENAULT |
| Length | 150 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| External Teeth, Wheel Side | 25 |
| Diameter | 84 mm |
| Internal Teeth, wheel side | 33 |
| Seal Diameter | 53 mm |
| Model | GRAND SCENIC MEGANE SCENIC |
| Manufacturer | RENAULT |
| Length | 150 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Type | Joint, drive shaft |
| Internal Teeth, wheel side | 23 |
| ABS Ring Diameter | 87 mm |
| External Teeth, Wheel Side | 27 |
| Number of Teeth | 44 |
| Diameter | 82 mm |
| Seal Diameter | 56 mm |
| Function | Joint, drive shaft |
| Length | 165 mm |
| Manufacturer | NISSAN |
| Model | ALMERA ALMERA TINO |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Type | Joint, drive shaft |
| Internal Teeth, wheel side | 23 |
| ABS Ring Diameter | 87 mm |
| External Teeth, Wheel Side | 27 |
| Number of Teeth | 44 |
| Diameter | 82 mm |
| Seal Diameter | 56 mm |
| Function | Joint, drive shaft |
| Length | 165 mm |
| Manufacturer | NISSAN |
| Model | ALMERA ALMERA TINO |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Model | 9-3 CROMA SIGNUM VECTRA |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Manufacturer | FIAT SAAB VAUXHALL |
| Paired article numbers | AST2163 |
Important compatibility info
| Model | 9-3 CROMA SIGNUM VECTRA |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Manufacturer | FIAT SAAB VAUXHALL |
| Paired article numbers | AST2163 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left |
| Model | ESCORT SIERRA |
| Manufacturer | FORD |
| Thread Size | 17 |
| Diameter | 12 mm |
| Length | 308 mm |
| Paired article numbers | AST2396 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left |
| Model | ESCORT SIERRA |
| Manufacturer | FORD |
| Thread Size | 17 |
| Diameter | 12 mm |
| Length | 308 mm |
| Paired article numbers | AST2396 |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 587 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 587 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 587 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 587 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Length 1 | 485 mm |
| Thread Measurement 2 | 10mm Banjo |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left |
| Thread Measurement 1 | Male M10 x 1 |
| Function | Brake Hose |
Important compatibility info
| Length 1 | 485 mm |
| Thread Measurement 2 | 10mm Banjo |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left |
| Thread Measurement 1 | Male M10 x 1 |
| Function | Brake Hose |
Important compatibility info
| Type | Sensor, wheel speed |
| Colour Coding | Black |
| Sensor Type | Active sensor |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Manufacturer | CITROEN PEUGEOT |
| Model | 407 C6 |
| Function | Sensor, wheel speed |
| Number of Poles | 2 -pin connector |
| Cable Length | 1679 mm |
Important compatibility info
| Type | Sensor, wheel speed |
| Colour Coding | Black |
| Sensor Type | Active sensor |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Manufacturer | CITROEN PEUGEOT |
| Model | 407 C6 |
| Function | Sensor, wheel speed |
| Number of Poles | 2 -pin connector |
| Cable Length | 1679 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 485 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 485 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Manufacturer | TOYOTA |
| Placement on Vehicle | Front Axle |
| Model | CAMRY CARINA CELICA COROLLA PICNIC RAV4 |
| Function | Accessory Kit, disc brake pad |
| Brake System | Akebono |
| Type | Accessory Kit, disc brake pad |
Important compatibility info
| Manufacturer | TOYOTA |
| Placement on Vehicle | Front Axle |
| Model | CAMRY CARINA CELICA COROLLA PICNIC RAV4 |
| Function | Accessory Kit, disc brake pad |
| Brake System | Akebono |
| Type | Accessory Kit, disc brake pad |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Brake Type | Drum Brake |
| Diameter | 243 mm. 6 mm |
| Function | Brake Mounting Plate |
| Type | Brake Mounting Plate |
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | in front of axle |
| Function | Brake Caliper |
| Piston diameter 1 | 54 mm |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| for brake disc thickness | 22 mm |
| Type | Brake Caliper |
| Manufacturer | FORD |
| Model | FOCUS |
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | in front of axle |
| Function | Brake Caliper |
| Piston diameter 1 | 54 mm |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| for brake disc thickness | 22 mm |
| Type | Brake Caliper |
| Manufacturer | FORD |
| Model | FOCUS |
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake Disc Type | Vented |
| Placement on Vehicle | in front of axle |
| Piston diameter 1 | 54 mm |
| Brake System | ATE |
| Function | Brake Caliper |
| Material | Grey Cast Iron |
| for brake disc thickness | 22 mm |
| Type | Brake Caliper |
| Manufacturer | FORD |
| Model | FOCUS |
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake Disc Type | Vented |
| Placement on Vehicle | in front of axle |
| Piston diameter 1 | 54 mm |
| Brake System | ATE |
| Function | Brake Caliper |
| Material | Grey Cast Iron |
| for brake disc thickness | 22 mm |
| Type | Brake Caliper |
| Manufacturer | FORD |
| Model | FOCUS |
Important compatibility info
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| Length 2 | 42 mm |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 33 |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















