Car Parts & Accessories by Apec
Categories
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| for OE number | 1610009080 |
| Manufacturer | TOYOTA |
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 90 mm |
| Water Pump Type | for V-ribbed belt use |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| for OE number | 1610009080 |
| Manufacturer | TOYOTA |
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 90 mm |
| Water Pump Type | for V-ribbed belt use |
Important compatibility info
| Function | Brake Drum |
| Type | Brake Drum |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 4 |
| Br. Drum outer diameter | 228 mm |
| Inner Brake Drum Height | 36 mm |
| Total Br. Drum Height | 83 mm |
| Inner Brake Drum Diameter | 200 mm |
| Model | CORSA NOVA TIGRA |
| Manufacturer | OPEL VAUXHALL |
| Additional Information 2 | without wheel bearing |
Important compatibility info
| Function | Brake Drum |
| Type | Brake Drum |
| Placement on Vehicle | Rear Axle |
| Number of Holes | 4 |
| Br. Drum outer diameter | 228 mm |
| Inner Brake Drum Height | 36 mm |
| Total Br. Drum Height | 83 mm |
| Inner Brake Drum Diameter | 200 mm |
| Model | CORSA NOVA TIGRA |
| Manufacturer | OPEL VAUXHALL |
| Additional Information 2 | without wheel bearing |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | Male M10 x 1 |
| Length 1 | 265 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | Male M10 x 1 |
| Length 1 | 265 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Length | 285 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Manufacturer | SAAB |
| Function | Suspension Spring |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Outer diameter | 139 mm |
| Model | 9-3 |
| Thickness | 13 mm |
Important compatibility info
| Length | 285 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Manufacturer | SAAB |
| Function | Suspension Spring |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Outer diameter | 139 mm |
| Model | 9-3 |
| Thickness | 13 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 346 mm |
| Outer diameter | 178 mm |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Thickness | 15 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 346 mm |
| Outer diameter | 178 mm |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Thickness | 15 mm |
Important compatibility info
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Spring Design | Coil spring with inconstant wire diameter |
| Function | Suspension Spring |
| Model | 500 |
| Manufacturer | FIAT |
Important compatibility info
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Spring Design | Coil spring with inconstant wire diameter |
| Function | Suspension Spring |
| Model | 500 |
| Manufacturer | FIAT |
Important compatibility info
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Manufacturer | MERCEDES |
| Placement on Vehicle | Rear Axle Left, Lower, Front |
| Steering arm type | Trailing Arm |
| Paired article numbers | AST2586 |
Important compatibility info
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Manufacturer | MERCEDES |
| Placement on Vehicle | Rear Axle Left, Lower, Front |
| Steering arm type | Trailing Arm |
| Paired article numbers | AST2586 |
Important compatibility info
| Steering arm type | Trailing Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Manufacturer | MERCEDES |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Right, Lower, Front |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST2585 |
Important compatibility info
| Steering arm type | Trailing Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Manufacturer | MERCEDES |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Right, Lower, Front |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST2585 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Model | RAV4 |
| Manufacturer | TOYOTA |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Model | RAV4 |
| Manufacturer | TOYOTA |
Important compatibility info
| Sensor Type | Active sensor |
| Function | Sensor, wheel speed |
| Cable Length | 840 mm |
| Placement on Vehicle | Front Axle Right |
| Number of Poles | 2 -pin connector |
| Colour Coding | White |
| Type | Sensor, wheel speed |
Important compatibility info
| Sensor Type | Active sensor |
| Function | Sensor, wheel speed |
| Cable Length | 840 mm |
| Placement on Vehicle | Front Axle Right |
| Number of Poles | 2 -pin connector |
| Colour Coding | White |
| Type | Sensor, wheel speed |
Important compatibility info
| Manufacturer | MERCEDES |
| Spring Design | Coil spring with inconstant wire diameter |
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Outer diameter | 149 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Model | C180 C200 C220 C250 |
| Thickness | 12.2 mm |
Important compatibility info
| Manufacturer | MERCEDES |
| Spring Design | Coil spring with inconstant wire diameter |
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Outer diameter | 149 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Model | C180 C200 C220 C250 |
| Thickness | 12.2 mm |
Important compatibility info
| Thread Measurement 1 | Male M10 x 1 |
| Function | Brake Hose |
| Additional Information | with pipe |
| Placement on Vehicle | Rear Axle Right, outer |
| Length 1 | 215 mm |
| Thread Measurement 2 | 12mm Banjo |
| Model | CORDOBA POLO |
| Manufacturer | SEAT VOLKSWAGEN |
| Type | Brake Hose |
Important compatibility info
| Thread Measurement 1 | Male M10 x 1 |
| Function | Brake Hose |
| Additional Information | with pipe |
| Placement on Vehicle | Rear Axle Right, outer |
| Length 1 | 215 mm |
| Thread Measurement 2 | 12mm Banjo |
| Model | CORDOBA POLO |
| Manufacturer | SEAT VOLKSWAGEN |
| Type | Brake Hose |
Important compatibility info
| Brake Disc Type | Vented |
| Piston diameter 1 | 54 mm |
| Brake System | TRW |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| for brake disc thickness | 21 mm |
| Type | Brake Caliper |
| Manufacturer | HONDA MG ROVER |
Important compatibility info
| Brake Disc Type | Vented |
| Piston diameter 1 | 54 mm |
| Brake System | TRW |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| for brake disc thickness | 21 mm |
| Type | Brake Caliper |
| Manufacturer | HONDA MG ROVER |
Important compatibility info
| Piston diameter 1 | 54 mm |
| for brake disc thickness | 21 mm |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Manufacturer | HONDA MG ROVER |
Important compatibility info
| Piston diameter 1 | 54 mm |
| for brake disc thickness | 21 mm |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Manufacturer | HONDA MG ROVER |
Important compatibility info
| Model | PAJERO/SHOGUN |
| Placement on Vehicle | Rear Axle |
| Function | Brake Shoe Set, parking brake |
| Inner Brake Drum Diameter | 200 mm |
| Type | Brake Shoe Set, parking brake |
| Manufacturer | MITSUBISHI |
| Width | 32 mm |
Important compatibility info
| Model | PAJERO/SHOGUN |
| Placement on Vehicle | Rear Axle |
| Function | Brake Shoe Set, parking brake |
| Inner Brake Drum Diameter | 200 mm |
| Type | Brake Shoe Set, parking brake |
| Manufacturer | MITSUBISHI |
| Width | 32 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














