Car Parts & Accessories by Apec
Categories
Important compatibility info
| Function | Guide Sleeve Kit, brake caliper |
| Type | Guide Sleeve Kit, brake caliper |
| Brake System | Brembo |
| Model | MASTER MOVANO NV400 |
| Manufacturer | NISSAN RENAULT VAUXHALL |
Important compatibility info
| Type | Ball Joint |
| Required quantity | 2 |
| Function | Ball Joint |
| Model | D-MAX RODEO |
| Steering arm type | for control arm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Manufacturer | ISUZU |
| Mounting Type | Bolted |
| Number of mounting bores | 4 |
| Thread Size | M14x1.5 |
| Paired article numbers | AST0222 |
Important compatibility info
| Type | Ball Joint |
| Required quantity | 2 |
| Function | Ball Joint |
| Model | D-MAX RODEO |
| Steering arm type | for control arm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Manufacturer | ISUZU |
| Mounting Type | Bolted |
| Number of mounting bores | 4 |
| Thread Size | M14x1.5 |
| Paired article numbers | AST0222 |
Important compatibility info
| Function | Tie Rod End |
| Thread Type | with right-hand thread, with internal thread |
| Type | Tie Rod End |
| Model | X5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Size | M14x1.5 |
| Manufacturer | BMW |
| Paired article numbers | AST6371 |
Important compatibility info
| Function | Tie Rod End |
| Thread Type | with right-hand thread, with internal thread |
| Type | Tie Rod End |
| Model | X5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Size | M14x1.5 |
| Manufacturer | BMW |
| Paired article numbers | AST6371 |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 40 mm |
| Placement on Vehicle | Front Axle |
| Manufacturer | HONDA MG ROVER |
| Outer diameter 1 | 76 mm |
| Width 1 | 41 mm |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 40 mm |
| Placement on Vehicle | Front Axle |
| Manufacturer | HONDA MG ROVER |
| Outer diameter 1 | 76 mm |
| Width 1 | 41 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Accessory Kit, brake shoes |
| Brake System | TRW |
| Type | Accessory Kit, brake shoes |
| Model | 400 CONVOY DAILY |
| Manufacturer | IVECO LDV |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Accessory Kit, brake shoes |
| Brake System | TRW |
| Type | Accessory Kit, brake shoes |
| Model | 400 CONVOY DAILY |
| Manufacturer | IVECO LDV |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Manufacturer | MERCEDES |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without bearing |
| Outer diameter | 67 mm |
| Inner diameter | 10 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Manufacturer | MERCEDES |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without bearing |
| Outer diameter | 67 mm |
| Inner diameter | 10 mm |
Important compatibility info
| Placement on Vehicle | Left Exterior Mirror |
| Type | Direction Indicator |
| Function | Direction Indicator |
Important compatibility info
| Placement on Vehicle | Right Exterior Mirror |
| Type | Direction Indicator |
| Function | Direction Indicator |
Important compatibility info
| Part number of recommended accessories | BBS3, BSC1 |
| Quantity | 1 |
| Mounting bores distance | 35 mm |
| Placement on Vehicle | Rear Axle |
| Piston Diameter | 19 mm |
| Function | Wheel Brake Cylinder |
| Thread Size | 10x1 |
| Material | Grey Cast Iron |
| Type | Wheel Brake Cylinder |
| Model | FORESTER IMPREZA |
| Manufacturer | SUBARU |
Important compatibility info
| Part number of recommended accessories | BBS3, BSC1 |
| Quantity | 1 |
| Mounting bores distance | 35 mm |
| Placement on Vehicle | Rear Axle |
| Piston Diameter | 19 mm |
| Function | Wheel Brake Cylinder |
| Thread Size | 10x1 |
| Material | Grey Cast Iron |
| Type | Wheel Brake Cylinder |
| Model | FORESTER IMPREZA |
| Manufacturer | SUBARU |
Important compatibility info
| Material | Aluminium |
| Thread Size | 10x1 |
| Brake System | Bosch |
| Mounting bores distance | 15 mm |
| Quantity | 1 |
| Function | Wheel Brake Cylinder |
| Part number of recommended accessories | BBS3, BSC1 |
| Piston Diameter | 17 mm |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle |
| Model | 107 AYGO C1 |
| Manufacturer | CITROEN PEUGEOT TOYOTA |
Important compatibility info
| Material | Aluminium |
| Thread Size | 10x1 |
| Brake System | Bosch |
| Mounting bores distance | 15 mm |
| Quantity | 1 |
| Function | Wheel Brake Cylinder |
| Part number of recommended accessories | BBS3, BSC1 |
| Piston Diameter | 17 mm |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle |
| Model | 107 AYGO C1 |
| Manufacturer | CITROEN PEUGEOT TOYOTA |
Important compatibility info
| Thread Measurement 2 | Male M10 x 1 |
| Thread Measurement 1 | Female M10 x 1 |
| Additional Information | with pipe |
| Manufacturer | OPEL VAUXHALL |
| Type | Brake Hose |
| Length 1 | 230 mm |
| Model | ASTRA COMBO |
| Function | Brake Hose |
Important compatibility info
| Thread Measurement 2 | Male M10 x 1 |
| Thread Measurement 1 | Female M10 x 1 |
| Additional Information | with pipe |
| Manufacturer | OPEL VAUXHALL |
| Type | Brake Hose |
| Length 1 | 230 mm |
| Model | ASTRA COMBO |
| Function | Brake Hose |
Important compatibility info
| Part number of recommended accessories | BBT2, BBW3 |
| Thread Measurement 1 | Male M10 x 1 |
| Placement on Vehicle | Front Axle |
| Type | Brake Hose |
| Length 1 | 555 mm |
| Thread Measurement 2 | 10mm Banjo |
| Manufacturer | AUDI SEAT VOLKSWAGEN |
| Model | A1 IBIZA POLO S1 |
| Function | Brake Hose |
Important compatibility info
| Part number of recommended accessories | BBT2, BBW3 |
| Thread Measurement 1 | Male M10 x 1 |
| Placement on Vehicle | Front Axle |
| Type | Brake Hose |
| Length 1 | 555 mm |
| Thread Measurement 2 | 10mm Banjo |
| Manufacturer | AUDI SEAT VOLKSWAGEN |
| Model | A1 IBIZA POLO S1 |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without bulb holder |
| Colour | white |
| Registration Type | ECE approved |
| Type | Direction Indicator |
| Function | Direction Indicator |
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without bulb holder |
| Colour | white |
| Registration Type | ECE approved |
| Type | Direction Indicator |
| Function | Direction Indicator |
Important compatibility info
| Steering arm type | for control arm |
| Type | Ball Joint |
| Function | Ball Joint |
| Thread Size | M18x1.5, M20x1.5 |
| Diameter | 48 mm |
| Model | DAILY |
| Manufacturer | IVECO |
| Mounting Type | Bolted |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Paired article numbers | AST0129 |
Important compatibility info
| Steering arm type | for control arm |
| Type | Ball Joint |
| Function | Ball Joint |
| Thread Size | M18x1.5, M20x1.5 |
| Diameter | 48 mm |
| Model | DAILY |
| Manufacturer | IVECO |
| Mounting Type | Bolted |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Paired article numbers | AST0129 |
Important compatibility info
| Number of mounting bores | 2 |
| Mounting Type | Bolted |
| Function | Ball Joint |
| Type | Ball Joint |
| Thread Size | M12x1.25 |
| Steering arm type | for control arm |
| Placement on Vehicle | outer, Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | AST0285 |
| Manufacturer | TOYOTA |
| Model | MR2 TERCEL |
Important compatibility info
| Number of mounting bores | 2 |
| Mounting Type | Bolted |
| Function | Ball Joint |
| Type | Ball Joint |
| Thread Size | M12x1.25 |
| Steering arm type | for control arm |
| Placement on Vehicle | outer, Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | AST0285 |
| Manufacturer | TOYOTA |
| Model | MR2 TERCEL |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Required quantity | 2 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Manufacturer | TESLA |
| Model | MODEL X |
| Paired article numbers | AST4505 |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Required quantity | 2 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Manufacturer | TESLA |
| Model | MODEL X |
| Paired article numbers | AST4505 |
Important compatibility info
| Manufacturer | CITROEN FIAT PEUGEOT |
| Type | Inner Tie Rod |
| Thread Size | M14x1.5, M16x1.5 |
| Function | Inner Tie Rod |
| Model | 807 DISPATCH EXPERT SCUDO |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Axle Joint Length | 320 mm |
| Paired article numbers | AST6552 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















