Car Parts & Accessories by Apec
Categories
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Length | 807 mm |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A3 BORA GOLF LEON OCTAVIA TOLEDO |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | Kasco |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| for brake disc diameter | 262 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 34 mm |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | Kasco |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| for brake disc diameter | 262 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 34 mm |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Diameter | 45 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Height | 575 mm |
| Manufacturer | FIAT VAUXHALL |
| Model | COMBO DOBLO |
| Shock Absorber System | Twin-Tube |
| Compression Height | 357 mm |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Diameter | 45 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Height | 575 mm |
| Manufacturer | FIAT VAUXHALL |
| Model | COMBO DOBLO |
| Shock Absorber System | Twin-Tube |
| Compression Height | 357 mm |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Section | Outer section |
| Lens Colour | red |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Section | Outer section |
| Lens Colour | red |
Important compatibility info
| for brake disc thickness | 24 mm |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Disc Type | Vented |
| Material | Grey Cast Iron |
| Placement on Vehicle | Front Axle Left |
| for brake disc diameter | 276 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Piston diameter 1 | 57 mm |
| Brake System | Mando |
Important compatibility info
| for brake disc thickness | 24 mm |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Disc Type | Vented |
| Material | Grey Cast Iron |
| Placement on Vehicle | Front Axle Left |
| for brake disc diameter | 276 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Piston diameter 1 | 57 mm |
| Brake System | Mando |
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| for brake disc diameter | 276 mm |
| Material | Grey Cast Iron |
| Brake System | Mando |
| Brake Disc Type | Vented |
| Part number of recommended accessories | BBS6, BSC1 |
| Piston diameter 1 | 57 mm |
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| for brake disc diameter | 276 mm |
| Material | Grey Cast Iron |
| Brake System | Mando |
| Brake Disc Type | Vented |
| Part number of recommended accessories | BBS6, BSC1 |
| Piston diameter 1 | 57 mm |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 26 |
| Number of Teeth | 48 |
| Length | 650 mm |
| Manufacturer | TOYOTA |
| External Teeth, Diff.Side | 20 |
| Model | COROLLA VERSO |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 26 |
| Number of Teeth | 48 |
| Length | 650 mm |
| Manufacturer | TOYOTA |
| External Teeth, Diff.Side | 20 |
| Model | COROLLA VERSO |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Function | Starter |
| Rated Power | 1 kW |
| Number of Teeth | 10 |
| Rotation Direction | Anticlockwise rotation |
| Voltage | 12 V |
| Type | Starter |
| Number of mounting bores | 2 |
| Manufacturer Restriction | Bosch |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Important compatibility info
| Function | Starter |
| Rated Power | 1 kW |
| Number of Teeth | 10 |
| Rotation Direction | Anticlockwise rotation |
| Voltage | 12 V |
| Type | Starter |
| Number of mounting bores | 2 |
| Manufacturer Restriction | Bosch |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Important compatibility info
| Additional Information 2 | with wheel hub, Wheel Bearing integrated into wheel hub |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Width | 72 mm |
| Outer diameter | 78 mm |
| Inner diameter | 37 mm |
| Placement on Vehicle | Front Axle |
| Manufacturer | CHRYSLER |
| Model | 300C |
Important compatibility info
| Additional Information 2 | with wheel hub, Wheel Bearing integrated into wheel hub |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Width | 72 mm |
| Outer diameter | 78 mm |
| Inner diameter | 37 mm |
| Placement on Vehicle | Front Axle |
| Manufacturer | CHRYSLER |
| Model | 300C |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 130 mm |
| Width 1 | 110 mm |
| Manufacturer | CITROEN DS PEUGEOT |
| Additional Information 2 | with integrated magnetic sensor ring |
| Placement on Vehicle | Rear Axle |
| Replaces | AWB1479 |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 130 mm |
| Width 1 | 110 mm |
| Manufacturer | CITROEN DS PEUGEOT |
| Additional Information 2 | with integrated magnetic sensor ring |
| Placement on Vehicle | Rear Axle |
| Replaces | AWB1479 |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Type | Oil Pressure |
| Compression Height | 353 mm |
| Placement on Vehicle | Front Axle |
| Diameter | 50 mm |
| Type | Shock Absorber |
| Height | 522 mm |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A3 BORA GOLF LEON OCTAVIA TOLEDO |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Type | Oil Pressure |
| Compression Height | 353 mm |
| Placement on Vehicle | Front Axle |
| Diameter | 50 mm |
| Type | Shock Absorber |
| Height | 522 mm |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A3 BORA GOLF LEON OCTAVIA TOLEDO |
Important compatibility info
| Cone Size | 17.9 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Push Rod |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Manufacturer | KIA |
| Model | SORENTO |
| Paired article numbers | AST2929 |
Important compatibility info
| Cone Size | 17.9 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Push Rod |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Manufacturer | KIA |
| Model | SORENTO |
| Paired article numbers | AST2929 |
Important compatibility info
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
| Part number of recommended accessories | BBS5, BSC2 |
| for brake disc diameter | 265 mm |
| Type | Brake Caliper |
| for brake disc thickness | 9 mm |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake Disc Type | solid |
| Placement on Vehicle | Rear Axle Right |
| Material | Grey Cast Iron |
| Number of Poles | 2 -pin connector |
Important compatibility info
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
| Part number of recommended accessories | BBS5, BSC2 |
| for brake disc diameter | 265 mm |
| Type | Brake Caliper |
| for brake disc thickness | 9 mm |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake Disc Type | solid |
| Placement on Vehicle | Rear Axle Right |
| Material | Grey Cast Iron |
| Number of Poles | 2 -pin connector |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
| Manufacturer | BMW |
| Paired article numbers | AST2261 |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
| Manufacturer | BMW |
| Paired article numbers | AST2261 |
Important compatibility info
| Type | Cable Pull, manual transmission |
| Manufacturer | FIAT |
| Model | GRANDE PUNTO PUNTO PUNTO EVO |
| Function | Cable Pull, manual transmission |
| Length 2 | 960 mm |
| Number of Gears | for reverse gear |
| Length 1 | 1325 mm |
Important compatibility info
| Type | Cable Pull, manual transmission |
| Manufacturer | FIAT |
| Model | GRANDE PUNTO PUNTO PUNTO EVO |
| Function | Cable Pull, manual transmission |
| Length 2 | 960 mm |
| Number of Gears | for reverse gear |
| Length 1 | 1325 mm |
Important compatibility info
| Placement on Vehicle | Right |
| Operating Mode | Electric |
| Surface | primed |
| Number of Connectors / Ports | 8 |
| Light Function | with indicator |
| Outer/Inner Mirror | Heatable, Electronically foldable, Convex |
| Type | Exterior Mirror |
| Function | Exterior Mirror |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















