Car Parts & Accessories by Apec
Categories
Important compatibility info
| Inner diameter 1 | 33 mm |
| Width 1 | 95 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Manufacturer | NISSAN |
| Model | PATHFINDER |
| Placement on Vehicle | Rear Axle |
| Outer diameter 1 | 148 mm |
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Exterior Mirror |
| Bulb Type | WY5W |
| Light Function | with indicator |
| Function | Exterior Mirror |
| Outer/Inner Mirror | with wide angle mirror, Short mirror arm, Convex |
| Driver Position | for right-hand drive vehicles |
| Operating Mode | Manual |
| Placement on Vehicle | Left |
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Exterior Mirror |
| Bulb Type | WY5W |
| Light Function | with indicator |
| Function | Exterior Mirror |
| Outer/Inner Mirror | with wide angle mirror, Short mirror arm, Convex |
| Driver Position | for right-hand drive vehicles |
| Operating Mode | Manual |
| Placement on Vehicle | Left |
Important compatibility info
| Number of Connectors / Ports | 2 |
| Outer/Inner Mirror | with wide angle mirror, Short mirror arm, Convex |
| Type | Exterior Mirror |
| Function | Exterior Mirror |
| Bulb Type | WY5W |
| Light Function | with indicator |
| Placement on Vehicle | Right |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
Important compatibility info
| Number of Connectors / Ports | 2 |
| Outer/Inner Mirror | with wide angle mirror, Short mirror arm, Convex |
| Type | Exterior Mirror |
| Function | Exterior Mirror |
| Bulb Type | WY5W |
| Light Function | with indicator |
| Placement on Vehicle | Right |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
Important compatibility info
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Type | Brake Master Cylinder |
| Manufacturer | LAND ROVER |
| Model | DEFENDER |
| Thread Size | M10x1 |
| Brake System | TRW |
| Bore Diameter | 25 mm |
| Number of Connectors / Ports | 3 |
Important compatibility info
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Type | Brake Master Cylinder |
| Manufacturer | LAND ROVER |
| Model | DEFENDER |
| Thread Size | M10x1 |
| Brake System | TRW |
| Bore Diameter | 25 mm |
| Number of Connectors / Ports | 3 |
Important compatibility info
| Brake Disc Type | internally vented |
| Height | 139 mm |
| Outer diameter | 375 mm |
| Additional Information 2 | without wheel hub, without wheel studs |
| Brake Disc Thickness | 45 mm |
| Bolt Hole Circle Diameter | 168 mm |
| Centering Diameter | 131 mm |
| Hole Arrangement / Number | 12/15 |
| Packaging height | 16 cm |
| Packaging length | 41 cm |
| Packaging width | 39.5 cm |
| Type | Brake Disc |
| Function | Brake Disc |
| Extra Description | Apec Truck |
| Rotor Style | internally vented |
Important compatibility info
| Number of Ribs | 1 |
| Function | Alternator |
| Manufacturer Restriction | Lucas |
| Voltage | 12 V |
| Pulleys | for v-belt pulley |
| Alternator Charge Current | 36 A |
| Type | Alternator |
Important compatibility info
| Number of Ribs | 1 |
| Function | Alternator |
| Manufacturer Restriction | Lucas |
| Voltage | 12 V |
| Pulleys | for v-belt pulley |
| Alternator Charge Current | 36 A |
| Type | Alternator |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right |
| Type | Shock Absorber |
| Manufacturer | NISSAN |
| Model | PULSAR |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right |
| Type | Shock Absorber |
| Manufacturer | NISSAN |
| Model | PULSAR |
Important compatibility info
| Rated Power | 1.1 kW |
| Number of Thread Bores | 1 |
| Number of mounting bores | 2 |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Type | Starter |
| Manufacturer Restriction | Bosch |
| Function | Starter |
| Manufacturer | TOYOTA |
| Model | CARINA CELICA COROLLA |
Important compatibility info
| Rated Power | 1.1 kW |
| Number of Thread Bores | 1 |
| Number of mounting bores | 2 |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Type | Starter |
| Manufacturer Restriction | Bosch |
| Function | Starter |
| Manufacturer | TOYOTA |
| Model | CARINA CELICA COROLLA |
Important compatibility info
| Number of Thread Bores | 2 |
| Rated Power | 0.9 kW |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 2 |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Manufacturer Restriction | Valeo |
| Function | Starter |
| Manufacturer | HYUNDAI KIA |
| Model | ACCENT CERATO GETZ MATRIX RIO |
Important compatibility info
| Number of Thread Bores | 2 |
| Rated Power | 0.9 kW |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 2 |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Manufacturer Restriction | Valeo |
| Function | Starter |
| Manufacturer | HYUNDAI KIA |
| Model | ACCENT CERATO GETZ MATRIX RIO |
Important compatibility info
| Number of mounting bores | 2 |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 0.9 kW |
| Manufacturer Restriction | Mitsubishi |
| Function | Starter |
| Manufacturer | SUZUKI |
| Model | JIMNY SAMURAI X90 |
Important compatibility info
| Number of mounting bores | 2 |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 0.9 kW |
| Manufacturer Restriction | Mitsubishi |
| Function | Starter |
| Manufacturer | SUZUKI |
| Model | JIMNY SAMURAI X90 |
Important compatibility info
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Manufacturer Restriction | Bosch |
| Function | Starter |
| Rated Power | 1.6 kW |
Important compatibility info
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Manufacturer Restriction | Bosch |
| Function | Starter |
| Rated Power | 1.6 kW |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.8 kW |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.8 kW |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Function | Starter |
Important compatibility info
| Piston diameter 1 | 48 mm |
| Function | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| for brake disc thickness | 28 mm |
| Brake Disc Type | Vented |
| Material | Grey Cast Iron |
| Placement on Vehicle | behind the axle |
| Brake System | Brembo |
| Brake Caliper Type | Brake Caliper (2 pistons) |
Important compatibility info
| Piston diameter 1 | 48 mm |
| Function | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| for brake disc thickness | 28 mm |
| Brake Disc Type | Vented |
| Material | Grey Cast Iron |
| Placement on Vehicle | behind the axle |
| Brake System | Brembo |
| Brake Caliper Type | Brake Caliper (2 pistons) |
Important compatibility info
| Brake System | ATE |
| Bore Diameter | 24 mm |
| Number of Connectors / Ports | 2 |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Manufacturer | MINI |
| Model | CONVERTIBLE COOPER CONVERTIBLE ONE COOPER ONE |
| Material | Aluminium |
| Thread Size | 12x1 |
Important compatibility info
| Brake System | ATE |
| Bore Diameter | 24 mm |
| Number of Connectors / Ports | 2 |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Manufacturer | MINI |
| Model | CONVERTIBLE COOPER CONVERTIBLE ONE COOPER ONE |
| Material | Aluminium |
| Thread Size | 12x1 |
Important compatibility info
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Manufacturer | MERCEDES |
Important compatibility info
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Manufacturer | MERCEDES |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














