Proud to be a UK-based company
Contact usCar Parts & Accessories by Hella
Categories
Important compatibility info
| Weight | 570 g |
| Height | 173 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Yellow |
| Outer diameter 1 | 137 mm |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PMMA (Polymethylmethacrylate) |
| Fulfils ECE norm | R65, R10 |
| Housing material | Plastic |
| Operating temperature to | +60 °C |
| Function | Rotating Beacon |
| Extra Description | KL Junior |
| Operating temperature from [C] | -40 °C |
| Rotating beacon RPM [1/min] | 150 1/min |
| Fulfils test standard | RCM |
| Light colour | Amber |
Additional Information
- 1x Hella Lens, rotating beacon (9EL860627-001)
- 1x Hella Bulb (8GH002089-251)
£45.39
Important compatibility info
| Weight | 570 g |
| Height | 173 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Yellow |
| Outer diameter 1 | 137 mm |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PMMA (Polymethylmethacrylate) |
| Fulfils ECE norm | R65, R10 |
| Housing material | Plastic |
| Operating temperature to | +60 °C |
| Function | Rotating Beacon |
| Extra Description | KL Junior |
| Operating temperature from [C] | -40 °C |
| Rotating beacon RPM [1/min] | 150 1/min |
| Fulfils test standard | RCM |
| Light colour | Amber |
Additional Information
- 1x Hella Lens, rotating beacon (9EL860627-001)
- 1x Hella Bulb (8GH002089-251)
£45.39
Important compatibility info
| Weight | 590 g |
| Height | 192 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Yellow |
| Outer diameter 1 | 155 mm |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | Yellow |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PC (Polycarbonate) |
| Fulfils ECE norm | R10, R65 |
| Housing material | Plastic |
| Operating temperature to | +60 °C |
| Function | Rotating Beacon |
| Extra Description | KL 750 |
| Operating temperature from [C] | -40 °C |
| Rotating beacon RPM [1/min] | 180 1/min |
| Light colour | Yellow |
Additional Information
- 1x Hella Lens, rotating beacon (9EL860627-001)
- 1x Hella Timing Belt Kit (9XR854840-001)
- 1x Hella Electric Motor, rotating beacon (9MN862741-001)
- 1x Hella Bulb (8GH002089-251)
£82.40
Important compatibility info
| Weight | 590 g |
| Height | 192 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Yellow |
| Outer diameter 1 | 155 mm |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | Yellow |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PC (Polycarbonate) |
| Fulfils ECE norm | R10, R65 |
| Housing material | Plastic |
| Operating temperature to | +60 °C |
| Function | Rotating Beacon |
| Extra Description | KL 750 |
| Operating temperature from [C] | -40 °C |
| Rotating beacon RPM [1/min] | 180 1/min |
| Light colour | Yellow |
Additional Information
- 1x Hella Lens, rotating beacon (9EL860627-001)
- 1x Hella Timing Belt Kit (9XR854840-001)
- 1x Hella Electric Motor, rotating beacon (9MN862741-001)
- 1x Hella Bulb (8GH002089-251)
£82.40
Important compatibility info
| Weight | 720 g |
| Height | 167 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Black |
| Outer diameter 1 | 135 mm |
| Light Design | Halogen |
| Mounting Type | Flexible pipe sockets |
| Quantity | 1 |
| Lens Colour | Yellow |
| Registration Type | SAE approved |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PC (Polycarbonate) |
| Fulfils ECE norm | R10, R65 |
| Housing material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature to | +60 °C |
| Function | Rotating Beacon |
| Extra Description | Rota Compact |
| Operating temperature from [C] | -40 °C |
| Rotating beacon RPM [1/min] | 180 1/min |
| Replaced by | 2XD013979-011 |
| Light colour | Yellow |
Additional Information
- 1x Hella Lens, rotating beacon (9EL864074-001)
- 1x Hella Timing Belt Kit (9XR855975-001)
- 1x Hella Bulb (8GH002089-251)
£51.42
Important compatibility info
| Weight | 720 g |
| Height | 167 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Black |
| Outer diameter 1 | 135 mm |
| Light Design | Halogen |
| Mounting Type | Flexible pipe sockets |
| Quantity | 1 |
| Lens Colour | Yellow |
| Registration Type | SAE approved |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PC (Polycarbonate) |
| Fulfils ECE norm | R10, R65 |
| Housing material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature to | +60 °C |
| Function | Rotating Beacon |
| Extra Description | Rota Compact |
| Operating temperature from [C] | -40 °C |
| Rotating beacon RPM [1/min] | 180 1/min |
| Replaced by | 2XD013979-011 |
| Light colour | Yellow |
Additional Information
- 1x Hella Lens, rotating beacon (9EL864074-001)
- 1x Hella Timing Belt Kit (9XR855975-001)
- 1x Hella Bulb (8GH002089-251)
£51.42
Important compatibility info
| Placement on Vehicle | Left, Right, Rear, Upper |
| Length | 80 mm |
| Height | 42 mm |
| Width | 80 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | C5W |
| Light Function | with taillight |
| Housing Colour | Grey |
| Light Design | Halogen |
| Mounting Type | mounting |
| Quantity | 2 |
| Number of light functions | 1 |
| Lens Colour | Red |
| Plug Type | Blade Terminal |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lamp Base (9FT088047-001)
- 1x Hella Lens, tail light (9EL135266-001)
£8.65
Important compatibility info
| Placement on Vehicle | Right Rear, Left, Right, Left Rear |
| Length | 40 mm |
| Height | 52 mm |
| Width | 52 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V. 12 V |
| Bulb Type | C5W |
| Light Function | with taillight |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Plug Type | Male |
| Power Consumption | 5 W |
| Protection Type (IP Code) | IP5K4K, IPX9K |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
- 1x Hella Lens, tail light (9EL117330-011)
£9.90
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 264 mm |
| Height | 133 mm |
| Width | 133 mm |
| Additional Information 2 | without bulbs |
| Voltage | 24 V. 12 V |
| Bulb Type | R5W |
| Light Function | with taillight |
| Housing Colour | Silver |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Number of light functions | 1 |
| Lens Colour | Red |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Country Version | Europe |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Brief Information
*** Original spare part
£38.44
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 30 mm |
| Height | 98 mm |
| Width | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting |
| Quantity | 60 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved |
| Fastening Type | 3-point attachment |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£47.59
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 102 mm |
| Height | 40 mm |
| Width | 100 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | C5W |
| Light Function | with taillight |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Quantity | 2 |
| Number of light functions | 1 |
| Lens Colour | Red |
| Plug Type | Male |
| Power Consumption | 5 W |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
£11.05
Important compatibility info
| Placement on Vehicle | Right, Left |
| Length | 11 mm |
| Height | 38 mm |
| Width | 126 mm |
| Additional Information | with bulb |
| Voltage | 24 V |
| Bulb Type | W5W |
| Light Function | with taillight |
| Housing Colour | White |
| Light Design | Halogen |
| Mounting Type | Fitting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Red |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | Male |
| Power Consumption | 5 W |
| Protection Type (IP Code) | IP5K9K |
| Type | Tail Light |
| Function | Tail Light |
Additional Information
- 10x Hella Bulb (8GP003594-241)
£11.07
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 84 mm |
| Height | 51 mm |
| Width | 84 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W, C5W |
| Light Function | with stop light, with taillight |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL115003-035)
£14.84
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 84 mm |
| Height | 51 mm |
| Width | 84 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W, C5W |
| Light Function | with stop light, with taillight |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Fastening Type | for horizontal fastening |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL115003-035)
£14.84
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED), with stop light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Fitting |
| Cable Length | 160 mm |
| Number of light functions | 2 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£65.93
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED), with stop light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Fitting |
| Cable Length | 160 mm |
| Number of light functions | 2 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£65.93
Important compatibility info
£73.44
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 130 mm |
| Height | 30 mm |
| Voltage | 24 V. 12 V |
| Bulb Type | LED |
| Light Function | with taillight (LED), with stop light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 2500 mm |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Number of LEDs | 1 |
| LED Colour | Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£120.01
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 130 mm |
| Height | 30 mm |
| Voltage | 24 V. 12 V |
| Bulb Type | LED |
| Light Function | with taillight (LED), with stop light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 2500 mm |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Number of LEDs | 1 |
| LED Colour | Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£120.01
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 90 mm |
| Voltage | 24 V |
| Bulb Type | P21/5W |
| Light Function | with taillight, with stop light |
| Light Design | Bulb Technology |
| Mounting Type | Fitting, Bolted |
| Quantity | 1 |
| Cable Length | 100 mm |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Plug Type | Blade Terminal |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
- 1x Hella Bulb (8GD002078-241)
£31.01
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 90 mm |
| Voltage | 24 V |
| Bulb Type | P21/5W |
| Light Function | with taillight, with stop light |
| Light Design | Bulb Technology |
| Mounting Type | Fitting, Bolted |
| Quantity | 1 |
| Cable Length | 100 mm |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ECE approved |
| Plug Type | Blade Terminal |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
- 1x Hella Bulb (8GD002078-241)
£31.01
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 140 mm |
| Height | 80 mm |
| Additional Information 2 | without bulbs, without indicator failure control, with bolts/screws |
| Voltage | 12 V. 24 V |
| Bulb Type | R5W, P21W |
| Light Function | with taillight, with stop light, with indicator |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Number of light functions | 3 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Red/Yellow |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP5K4K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL113324-001)
- 1x Hella Lamp Base (9FT998007-011)
£21.02
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 140 mm |
| Height | 80 mm |
| Additional Information 2 | without bulbs, without indicator failure control, with bolts/screws |
| Voltage | 12 V. 24 V |
| Bulb Type | R5W, P21W |
| Light Function | with taillight, with stop light, with indicator |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Number of light functions | 3 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Red/Yellow |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP5K4K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL113324-001)
- 1x Hella Lamp Base (9FT998007-011)
£21.02
Important compatibility info
| Placement on Vehicle | Right |
| Length | 282 mm |
| Height | 105 mm |
| Width | 282 mm |
| Additional Information | with gasket/seal, with bulb holder |
| Material | Plastic |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Paired article numbers | 2SD 001 699-511 |
| Bulb Type | P21W, R10W |
| Light Function | with indicator, with stop light, with taillight, without number plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 3 |
| Housing Type | Synthetic Material Housing |
| Registration Type | ADR/GGVS approved, ECE approved |
| Fastening Type | for horizontal fastening |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL109139-001)
- 1x Hella Grommet (9GT074132-001)
£28.52
Important compatibility info
| Placement on Vehicle | Right |
| Length | 282 mm |
| Height | 105 mm |
| Width | 282 mm |
| Additional Information | with gasket/seal, with bulb holder |
| Material | Plastic |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Paired article numbers | 2SD 001 699-511 |
| Bulb Type | P21W, R10W |
| Light Function | with indicator, with stop light, with taillight, without number plate light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 3 |
| Housing Type | Synthetic Material Housing |
| Registration Type | ADR/GGVS approved, ECE approved |
| Fastening Type | for horizontal fastening |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Lens, tail light assembly (9EL109139-001)
- 1x Hella Grommet (9GT074132-001)
£28.52
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2SD 009 922-101 |
| Colour | Red, White |
| Bulb Type | W16W, WY21W |
| Light Function | with indicator, with stop light, with taillight |
| Additionally Required Parts | 2SA 009 923-091, 2TZ 009 923-111 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | Bulb Technology |
| Number of light functions | 3 |
| Section | Outer section |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| for combined PR number | A8B,A8C,8TC,8TD |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GP009021-002)
- 2x Hella Bulb (8GA008246-001)
£64.45
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2SD 009 922-101 |
| Colour | Red, White |
| Bulb Type | W16W, WY21W |
| Light Function | with indicator, with stop light, with taillight |
| Additionally Required Parts | 2SA 009 923-091, 2TZ 009 923-111 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | Bulb Technology |
| Number of light functions | 3 |
| Section | Outer section |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| for combined PR number | A8B,A8C,8TC,8TD |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GP009021-002)
- 2x Hella Bulb (8GA008246-001)
£64.45
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2SD 010 468-101 |
| Bulb Type | P21W, PY21W |
| Light Function | with indicator, with stop light, with taillight |
| Additionally Required Parts | 2TZ 010 469-091 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | Bulb Technology |
| Number of light functions | 3 |
| Section | Outer section |
| Lens Colour | White/Red |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GA002073-271)
£67.53
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2SD 010 468-101 |
| Bulb Type | P21W, PY21W |
| Light Function | with indicator, with stop light, with taillight |
| Additionally Required Parts | 2TZ 010 469-091 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | Bulb Technology |
| Number of light functions | 3 |
| Section | Outer section |
| Lens Colour | White/Red |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GA002073-271)
£67.53
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2SD 010 468-091 |
| Bulb Type | P21W, PY21W |
| Light Function | with indicator, with stop light, with taillight |
| Additionally Required Parts | 2TZ 010 469-101 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | Bulb Technology |
| Number of light functions | 3 |
| Section | Outer section |
| Lens Colour | White/Red |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb (8GA002073-271)
£71.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023