Car Parts & Accessories by Bosch
Categories
Important compatibility info
| Function | Ignition Distributor Cap |
| Type | Ignition Distributor Cap |
Important compatibility info
| Function | Ignition Distributor Cap |
| Type | Ignition Distributor Cap |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Brake Shoe Set |
| Piston Diameter | 25.4 mm |
| Extra Description | KIT SUPERPRO |
| Width | 57 mm |
| Type | Brake Shoe Set |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Brake Pad | with lining |
| Additional Information | with accessories, with wheel brake cylinder |
| Inner Brake Drum Diameter | 254 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Brake Shoe Set |
| Piston Diameter | 25.4 mm |
| Extra Description | KIT SUPERPRO |
| Width | 57 mm |
| Type | Brake Shoe Set |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Brake Pad | with lining |
| Additional Information | with accessories, with wheel brake cylinder |
| Inner Brake Drum Diameter | 254 mm |
Important compatibility info
| Additional Information 2 | with control unit |
| Function | Ignition Coil |
| Type | Ignition Coil |
| Replaces | 0221601452 |
Important compatibility info
| Additional Information 2 | with control unit |
| Function | Ignition Coil |
| Type | Ignition Coil |
| Replaces | 0221601452 |
Important compatibility info
| Overall Length | 760 mm |
| Recommended Replace Interval | 160000 km |
| Function | Oxygen Sensor |
| Number of circuits | 5 |
| Replaces | 0258007014 |
| Type | Oxygen Sensor |
Important compatibility info
| Overall Length | 760 mm |
| Recommended Replace Interval | 160000 km |
| Function | Oxygen Sensor |
| Number of circuits | 5 |
| Replaces | 0258007014 |
| Type | Oxygen Sensor |
Important compatibility info
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Replaces | 0580203122 |
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
Important compatibility info
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Replaces | 0580203122 |
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
Important compatibility info
| Function | Ignition Cable Kit |
| Type | Ignition Cable Kit |
Important compatibility info
| Function | Ignition Cable Kit |
| Type | Ignition Cable Kit |
Important compatibility info
| Function | Ignition Distributor Cap |
| Type | Ignition Distributor Cap |
Important compatibility info
| Function | Ignition Distributor Cap |
| Type | Ignition Distributor Cap |
Important compatibility info
| Function | Ignition Distributor Cap |
| Type | Ignition Distributor Cap |
Important compatibility info
| Function | Ignition Distributor Cap |
| Type | Ignition Distributor Cap |
Important compatibility info
| Additional Information | with fastening/mounting material |
| Operating Mode | Electric |
| Placement on Vehicle | in the fuel tank |
| Additional Information 2 | with connector parts |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Additional Information | with fastening/mounting material |
| Operating Mode | Electric |
| Placement on Vehicle | in the fuel tank |
| Additional Information 2 | with connector parts |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Overall Length | 565 mm |
| Recommended Replace Interval | 250000 km |
| Number of circuits | 5 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
| Replaces | 0258017547 |
Important compatibility info
| Overall Length | 565 mm |
| Recommended Replace Interval | 250000 km |
| Number of circuits | 5 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
| Replaces | 0258017547 |
Important compatibility info
| Fuel Mixture Formation | Direct Injection |
| Replaces | 0281007017 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
| Additional Information 2 | High-pressure Side |
Important compatibility info
| Fuel Mixture Formation | Direct Injection |
| Replaces | 0281007017 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
| Additional Information 2 | High-pressure Side |
Important compatibility info
| Operating Mode | Electric |
| Placement on Vehicle | in the fuel tank |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
Important compatibility info
| Operating Mode | Electric |
| Placement on Vehicle | in the fuel tank |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Replaces | 0986580369 |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Replaces | 0986580369 |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Additional Information 2 | with connector parts |
| Fuel Supply | Fuel level sensor in the main tank |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Additional Information 2 | with connector parts |
| Fuel Supply | Fuel level sensor in the main tank |
Important compatibility info
| Function | Brake Disc |
| Fulfils ECE norm | ECE-R90 |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 23 mm |
| Drill Diameter, up to | 13.7 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Rotor Style | Vented |
| Height | 39.9 mm |
| Outer diameter | 278 mm |
| Brake Disc Thickness | 25 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Brake Disc |
| Fulfils ECE norm | ECE-R90 |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 23 mm |
| Drill Diameter, up to | 13.7 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Rotor Style | Vented |
| Height | 39.9 mm |
| Outer diameter | 278 mm |
| Brake Disc Thickness | 25 mm |
| Placement on Vehicle | Front Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














