Proud to be a UK-based company
Contact usCar Parts & Accessories by Hella
Categories
Important compatibility info
| Placement on Vehicle | Left, Right |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
£21.92
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 111 mm |
| Height | 43 mm |
| Width | 51 mm |
| Additional Information | with holder |
| Voltage | 24 V |
| Number of Poles | 2 -pin connector |
| Bulb Type | LED |
| Light Function | with side marker light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Screw Connection, mounting |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Housing Type | Housing with Plastic Lid |
| Lens Colour | Yellow |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 1.2 W |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 2 |
| LED Colour | Yellow |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R91, R3 |
| Function | Side Marker Light |
£21.94
Important compatibility info
| Additional Information | with holder |
| Additional Information 2 | for trailer |
| Number of Poles | 4 -pin connector |
| Operating Mode | Electronic |
| Mounting Type | Plugged |
| Switching Capacity | 2+1(6)x21W+5 EP W |
| Temperature range from | -40 °C |
| Temperature range to | +85 °C |
| Function | Flasher Unit |
| Voltage | 12 V |
| Registration Type | ECE approved |
| Type | Flasher Unit |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£22.09
Important compatibility info
| Additional Information | with holder |
| Additional Information 2 | for trailer |
| Number of Poles | 4 -pin connector |
| Operating Mode | Electronic |
| Mounting Type | Plugged |
| Switching Capacity | 2+1(6)x21W+5 EP W |
| Temperature range from | -40 °C |
| Temperature range to | +85 °C |
| Function | Flasher Unit |
| Voltage | 12 V |
| Registration Type | ECE approved |
| Type | Flasher Unit |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£22.09
Important compatibility info
| Type | Actuator, headlight levelling |
| Function | Actuator, headlight levelling |
| Voltage | 12 V |
| Operating Mode | Electric |
£22.61
Important compatibility info
| Type | Actuator, headlight levelling |
| Function | Actuator, headlight levelling |
| Voltage | 12 V |
| Operating Mode | Electric |
£22.61
Important compatibility info
| Cable Length | 655 mm |
| Placement on Vehicle | Rear Axle |
| Sensor Type | Hall Sensor |
| Number of Poles | 2 -pin connector |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£22.61
Important compatibility info
| Cable Length | 655 mm |
| Placement on Vehicle | Rear Axle |
| Sensor Type | Hall Sensor |
| Number of Poles | 2 -pin connector |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£22.61
Important compatibility info
| Function | Actuator, headlight levelling |
| Type | Actuator, headlight levelling |
| Operating Mode | Electric |
| Light Design | Halogen |
| Voltage | 12 V |
£22.63
Important compatibility info
| Function | Actuator, headlight levelling |
| Type | Actuator, headlight levelling |
| Operating Mode | Electric |
| Light Design | Halogen |
| Voltage | 12 V |
£22.63
Important compatibility info
| Voltage | 12 V. 24 V |
| Light Function | with position light (LED) |
| Cable Length | 500 mm |
| Number of light functions | 1 |
| Registration Type | ECE approved, ADR/GGVS approved |
| Number of LEDs | 1 |
| Type | Position Light |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£22.77
Important compatibility info
| Placement on Vehicle | Front |
| Length | 111 mm |
| Height | 21 mm |
| Width | 51 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED), with reflector |
| Housing Colour | White |
| Light Design | LED |
| Mounting Type | mounting, Screw Connection |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 2 |
| Lens Colour | White |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 1.2 W |
| Protection Type (IP Code) | IP5KX |
| Number of LEDs | 2 |
| LED Colour | White |
| Type | Position Light |
| Fulfils ECE norm | R7, R3 |
| Function | Position Light |
| Moisture protection | Waterproof to IP65 |
£22.77
Important compatibility info
£22.93
Important compatibility info
| Number of Poles | 3 -pin connector |
| Type | Sensor, boost pressure |
| Pressure from | 15000 Pa |
| Pressure to | 105000 Pa |
| Function | Sensor, boost pressure |
| Voltage | 5 V |
| Replaces | 6PP009400-211 |
| Number of mounting bores | 3 |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£23.24
Important compatibility info
| Number of Poles | 3 -pin connector |
| Type | Sensor, boost pressure |
| Pressure from | 15000 Pa |
| Pressure to | 105000 Pa |
| Function | Sensor, boost pressure |
| Voltage | 5 V |
| Replaces | 6PP009400-211 |
| Number of mounting bores | 3 |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£23.24
Important compatibility info
| Additional Information | without bulb holder |
| Placement on Vehicle | Right |
| Additional Information 2 | with bolts/screws |
| Bulb Type | P21W, R10W |
| Light Function | with indicator, with stop light, with reverse light, with reflector, with taillight |
| Light Design | Halogen |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
£23.62
Important compatibility info
| Placement on Vehicle | Left, Lateral Installation |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W |
| Light Function | with indicator |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Number of light functions | 1 |
| Lens Colour | Yellow |
| Registration Type | ECE approved, SAE approved |
| Type | Auxiliary Direction Indicator |
| Function | Auxiliary Direction Indicator |
Additional Information
- 1x Hella Lens, direction indicator (9EL115830-001)
£23.91
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 22 mm |
| Height | 51 mm |
| Width | 111 mm |
| Additional Information 2 | with pipe |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting |
| Quantity | 20 |
| Cable Length | 5000 mm |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 1.2 W |
| Protection Type (IP Code) | IP5K4K |
| Number of LEDs | 2 |
| Type | Tail Light |
| Fulfils ECE norm | R7, R3, R10 |
| Function | Tail Light |
£24.07
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 22 mm |
| Height | 51 mm |
| Width | 111 mm |
| Additional Information 2 | with pipe |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with taillight (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting |
| Quantity | 30 |
| Cable Length | 5000 mm |
| Number of light functions | 2 |
| Lens Colour | Red |
| Registration Type | ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | open cable ends |
| Power Consumption | 0.6 W |
| Protection Type (IP Code) | IP5K4K |
| Number of LEDs | 2 |
| Type | Tail Light |
| Fulfils ECE norm | R7, R3, R10 |
| Function | Tail Light |
£24.19
Important compatibility info
| Placement on Vehicle | Upper, outer |
| Length | 24 mm |
| Height | 33 mm |
| Width | 83 mm |
| Additional Information 2 | with frame, without pipe |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with number plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved, ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£24.37
Important compatibility info
| Placement on Vehicle | Upper, outer |
| Length | 24 mm |
| Height | 33 mm |
| Width | 83 mm |
| Additional Information 2 | with frame, without pipe |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with number plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved, ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£24.37
Important compatibility info
| Additional Information | with holder |
| Additional Information 2 | for trailer |
| Voltage | 24 V |
| Number of Poles | 4 -pin connector |
| Operating Mode | Electronic |
| Mounting Type | Plugged |
| Registration Type | ECE approved |
| Switching Capacity | 2+1(6)x21W+0...5 EP W |
| Type | Flasher Unit |
| Temperature range from | -40 °C |
| Temperature range to | +85 °C |
| Function | Flasher Unit |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£24.47
Important compatibility info
| Additional Information | with holder |
| Additional Information 2 | for trailer |
| Voltage | 24 V |
| Number of Poles | 4 -pin connector |
| Operating Mode | Electronic |
| Mounting Type | Plugged |
| Registration Type | ECE approved |
| Switching Capacity | 2+1(6)x21W+0...5 EP W |
| Type | Flasher Unit |
| Temperature range from | -40 °C |
| Temperature range to | +85 °C |
| Function | Flasher Unit |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£24.47
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Sensor Type | Hall Sensor |
| Number of Poles | 2 -pin connector |
| Additional Information 2 | with clip |
| Placement on Vehicle | Rear Axle |
| Cable Length | 966 mm |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£24.59
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Sensor Type | Hall Sensor |
| Number of Poles | 2 -pin connector |
| Additional Information 2 | with clip |
| Placement on Vehicle | Rear Axle |
| Cable Length | 966 mm |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£24.59
Important compatibility info
| Number of Poles | 3 -pin connector |
| Number of mounting bores | 1 |
| Sensor Type | Hall Sensor |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£24.59
Important compatibility info
| Number of Poles | 3 -pin connector |
| Number of mounting bores | 1 |
| Sensor Type | Hall Sensor |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
£24.59
Important compatibility info
| Voltage | 12 V |
| Number of Poles | 2 -pin connector |
| Number of mounting bores | 2 |
| Mounting Type | Bayonet |
| Ignition Coil | Flush-Fitting Pencil Ignition Coils |
| Type | Ignition Coil |
| Function | Ignition Coil |
£24.71
Important compatibility info
| Voltage | 12 V |
| Number of Poles | 2 -pin connector |
| Number of mounting bores | 2 |
| Mounting Type | Bayonet |
| Ignition Coil | Flush-Fitting Pencil Ignition Coils |
| Type | Ignition Coil |
| Function | Ignition Coil |
£24.71
Important compatibility info
| Light Design | Halogen |
| Function | Actuator, headlight levelling |
| Voltage | 12 V |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Operating Mode | Electric |
| Type | Actuator, headlight levelling |
| Registration Type | ECE approved |
£24.72
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023