Car Parts & Accessories by Bosch
Categories
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
Important compatibility info
| Type | High-pressure Pump |
| Function | High-pressure Pump |
Important compatibility info
| Type | High-pressure Pump |
| Function | High-pressure Pump |
Important compatibility info
| Function | Fuel Feed Unit |
| Placement on Vehicle | in the fuel tank |
| Type | Fuel Feed Unit |
| Operating Mode | Electric |
Important compatibility info
| Function | Fuel Feed Unit |
| Placement on Vehicle | in the fuel tank |
| Type | Fuel Feed Unit |
| Operating Mode | Electric |
Important compatibility info
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Replaces | 0580203002 |
Important compatibility info
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Replaces | 0580203002 |
Important compatibility info
| Rated Power | 0.9 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 54 ° |
| Jaw opening angle measurement [Degree] | 70 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 13 mm |
| Connecting Angle | 54 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Flange Diameter | 74 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 13 mm |
| Number of Teeth | 9 |
| Length | 216 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 0.9 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 54 ° |
| Jaw opening angle measurement [Degree] | 70 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 13 mm |
| Connecting Angle | 54 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Flange Diameter | 74 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 13 mm |
| Number of Teeth | 9 |
| Length | 216 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Important compatibility info
| Placement on Vehicle | in the fuel tank |
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Important compatibility info
| Length | 198 mm |
| Voltage | 12 V |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Number of mounting bores | 2 |
| Pinion Rest Position | 11 mm |
| Type | Starter |
| Function | Starter |
| Number of Teeth | 10 |
| Thread Measurement 2 | M8x1,25 |
| Bore Diameter | 8.5 mm |
| Flange Diameter | 64 mm |
| Number of Thread Bores | 1 |
| Position / Degree | rechts ° |
| Clamp | 30,50 |
| Connecting Angle | 46 ° |
| Bore Diameter 2 | 9.1 mm |
| Starter Type | Self-supporting |
| Jaw opening angle measurement [Degree] | 127 ° |
| Fastening hole angle measurement [Degree] | 46 ° |
| Replaces | 1986S01011 |
Important compatibility info
| Length | 198 mm |
| Voltage | 12 V |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Number of mounting bores | 2 |
| Pinion Rest Position | 11 mm |
| Type | Starter |
| Function | Starter |
| Number of Teeth | 10 |
| Thread Measurement 2 | M8x1,25 |
| Bore Diameter | 8.5 mm |
| Flange Diameter | 64 mm |
| Number of Thread Bores | 1 |
| Position / Degree | rechts ° |
| Clamp | 30,50 |
| Connecting Angle | 46 ° |
| Bore Diameter 2 | 9.1 mm |
| Starter Type | Self-supporting |
| Jaw opening angle measurement [Degree] | 127 ° |
| Fastening hole angle measurement [Degree] | 46 ° |
| Replaces | 1986S01011 |
Important compatibility info
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 0.8 kW |
| Fastening hole angle measurement [Degree] | 38 ° |
| Jaw opening angle measurement [Degree] | 133 ° |
| Starter Type | Self-supporting |
| Bore Diameter 3 | 9 mm |
| Pinion Rest Position | 10.9 mm |
| Connecting Angle | 38 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 1 |
| Flange Diameter | 64.5 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 9 mm |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 8 |
| Length | 205 mm |
| Function | Starter |
Important compatibility info
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 0.8 kW |
| Fastening hole angle measurement [Degree] | 38 ° |
| Jaw opening angle measurement [Degree] | 133 ° |
| Starter Type | Self-supporting |
| Bore Diameter 3 | 9 mm |
| Pinion Rest Position | 10.9 mm |
| Connecting Angle | 38 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Number of Thread Bores | 1 |
| Flange Diameter | 64.5 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 9 mm |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 8 |
| Length | 205 mm |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 1.2 kW |
| Number of mounting bores | 2 |
| Pinion Rest Position | 62.5 mm |
| Type | Starter |
| Function | Starter |
| Length | 212 mm |
| Number of Teeth | 11 |
| Bore Diameter | 12.6 mm |
| Flange Diameter | 79 mm |
| Position / Degree | rechts ° |
| Clamp | 30,50 |
| Connecting Angle | 47 ° |
| Bore Diameter 2 | 12.6 mm |
| Fastening hole angle measurement [Degree] | 47 ° |
Important compatibility info
| Voltage | 12 V |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 1.2 kW |
| Number of mounting bores | 2 |
| Pinion Rest Position | 62.5 mm |
| Type | Starter |
| Function | Starter |
| Length | 212 mm |
| Number of Teeth | 11 |
| Bore Diameter | 12.6 mm |
| Flange Diameter | 79 mm |
| Position / Degree | rechts ° |
| Clamp | 30,50 |
| Connecting Angle | 47 ° |
| Bore Diameter 2 | 12.6 mm |
| Fastening hole angle measurement [Degree] | 47 ° |
Important compatibility info
| Additional Information 2 | High-pressure Side |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
Important compatibility info
| Additional Information 2 | High-pressure Side |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
Important compatibility info
| Length | 315 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Ampere-Hours | 80 Ah |
| Cold-test Current, EN | 800 A |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 800 A |
| Terminal Layout | Positive Front Right |
| Extra Description | S5A AGM |
| Replaces | 0092S60110 |
| Type | Starter Battery |
| Battery Type Code | 115 AGM |
| Key Words | 800A; 80Ah; 5Yr Warranty; 315x175x190 |
| Terminal Type | 1 |
| Hold-down Type | B00 |
| Warranty | 5 year warranty |
Important compatibility info
| Length | 315 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Ampere-Hours | 80 Ah |
| Cold-test Current, EN | 800 A |
| Function | Starter Battery |
| Cold Cranking Amperage (CCA) | 800 A |
| Terminal Layout | Positive Front Right |
| Extra Description | S5A AGM |
| Replaces | 0092S60110 |
| Type | Starter Battery |
| Battery Type Code | 115 AGM |
| Key Words | 800A; 80Ah; 5Yr Warranty; 315x175x190 |
| Terminal Type | 1 |
| Hold-down Type | B00 |
| Warranty | 5 year warranty |
Important compatibility info
| Operating Mode | Electric |
| Placement on Vehicle | Fuel Line |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Operating Mode | Electric |
| Placement on Vehicle | Fuel Line |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Rated Power | 1.1 kW |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 320 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 8.6 mm |
| Pinion Rest Position | 17.3 mm |
| Connecting Angle | 40 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Flange Diameter | 68 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8.6 mm |
| Number of Teeth | 9 |
| Length | 199 mm |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 1.1 kW |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 320 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 8.6 mm |
| Pinion Rest Position | 17.3 mm |
| Connecting Angle | 40 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Flange Diameter | 68 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8.6 mm |
| Number of Teeth | 9 |
| Length | 199 mm |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
| Replaces | 0444021056 |
Important compatibility info
| Type | Dosing Module, urea injection |
| Function | Dosing Module, urea injection |
| Replaces | 0444021056 |
Important compatibility info
| Length | 218 mm |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Bore Diameter | 10.5 mm |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 1 kW |
| Number of mounting bores | 2 |
| Flange Diameter | 65 mm |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Connecting Angle | 45 ° |
| Pinion Rest Position | 52 mm |
| Type | Starter |
| Bore Diameter 2 | 10.5 mm |
| Starter Type | Self-supporting |
| Function | Starter |
| Jaw opening angle measurement [Degree] | 130 ° |
| Fastening hole angle measurement [Degree] | 45 ° |
Important compatibility info
| Length | 218 mm |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Bore Diameter | 10.5 mm |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 1 kW |
| Number of mounting bores | 2 |
| Flange Diameter | 65 mm |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Connecting Angle | 45 ° |
| Pinion Rest Position | 52 mm |
| Type | Starter |
| Bore Diameter 2 | 10.5 mm |
| Starter Type | Self-supporting |
| Function | Starter |
| Jaw opening angle measurement [Degree] | 130 ° |
| Fastening hole angle measurement [Degree] | 45 ° |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10. 9 |
| Fastening hole angle measurement [Degree] | 37 ° |
| Jaw opening angle measurement [Degree] | 45 ° |
| Starter Type | Self-supporting |
| Bore Diameter 3 | 9 mm |
| Bore Diameter 2 | 9 mm |
| Pinion Rest Position | 8.5 mm |
| Connecting Angle | 37 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 82.5 mm |
| Number of mounting bores | 3 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 9 mm |
| Length | 228 mm |
| Rated Power | 1.7 kW |
| Function | Starter |
| Type | Starter |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















