Car Parts & Accessories by Apec
Categories
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 151 mm |
| Manufacturer | VAUXHALL |
| Model | ANTARA |
| Placement on Vehicle | Front Axle |
| Width 1 | 42 mm |
| Outer diameter 2 | 92 mm |
Important compatibility info
| Diameter | 240 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
| for OE number | 96 848 415 80 |
Important compatibility info
| Diameter | 240 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
| for OE number | 96 848 415 80 |
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| External Teeth, Wheel Side | 29 |
| Length | 950 mm |
| Manufacturer | NISSAN |
| Model | QASHQAI |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| External Teeth, Wheel Side | 29 |
| Length | 950 mm |
| Manufacturer | NISSAN |
| Model | QASHQAI |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | SAGINAW |
| Type | Hydraulic Pump, steering |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 129 mm |
| Number of grooves | 6 |
Important compatibility info
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| for steering manufacturer | SAGINAW |
| Type | Hydraulic Pump, steering |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 129 mm |
| Number of grooves | 6 |
Important compatibility info
| Additional Information 2 | with motor for headlamp levelling |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Bulb Type | H1, PY21W, H7 |
| Light Function | with low beam, with outline marker light (LED), with daytime running light (LED) |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Additional Information 2 | with motor for headlamp levelling |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Bulb Type | H1, PY21W, H7 |
| Light Function | with low beam, with outline marker light (LED), with daytime running light (LED) |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Additional Information 2 | with motor for headlamp levelling |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Bulb Type | H1, PY21W, H7 |
| Light Function | with low beam, with outline marker light (LED), with daytime running light (LED) |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Additional Information 2 | with motor for headlamp levelling |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Bulb Type | H1, PY21W, H7 |
| Light Function | with low beam, with outline marker light (LED), with daytime running light (LED) |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.8 kW |
| Number of mounting bores | 2 |
| Type | Starter |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.8 kW |
| Number of mounting bores | 2 |
| Type | Starter |
| Function | Starter |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST3057 |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST3057 |
Important compatibility info
| Type | Drive Shaft |
| External Teeth, Wheel Side | 40 |
| Length | 560 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Left |
| Manufacturer | FORD VOLVO |
| Model | MONDEO S-MAX S60 S80 V60 V70 |
Important compatibility info
| Type | Drive Shaft |
| External Teeth, Wheel Side | 40 |
| Length | 560 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Left |
| Manufacturer | FORD VOLVO |
| Model | MONDEO S-MAX S60 S80 V60 V70 |
Important compatibility info
| Type | Clutch Kit |
| Diameter | 270 mm |
| Function | Clutch Kit |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Type | Clutch Kit |
| Diameter | 270 mm |
| Function | Clutch Kit |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Number of Ribs | 5 |
| Voltage | 12 V |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 110 A |
| Type | Alternator |
| Manufacturer Restriction | Mitsubishi |
| Function | Alternator |
| Belt Pulley Diameter | 55 mm |
| Manufacturer | NISSAN RENAULT |
Important compatibility info
| Number of Ribs | 5 |
| Voltage | 12 V |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 110 A |
| Type | Alternator |
| Manufacturer Restriction | Mitsubishi |
| Function | Alternator |
| Belt Pulley Diameter | 55 mm |
| Manufacturer | NISSAN RENAULT |
Important compatibility info
| Number of grooves | 6 |
| for steering manufacturer | SAGINAW |
| Type | Hydraulic Pump, steering |
| Additional Information | with reservoir |
| Belt Pulley Diameter | 125 mm |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
Important compatibility info
| Number of grooves | 6 |
| for steering manufacturer | SAGINAW |
| Type | Hydraulic Pump, steering |
| Additional Information | with reservoir |
| Belt Pulley Diameter | 125 mm |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Left |
| Bulb Type | H7/H1 |
| Registration Type | ECE approved |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Housing Colour | chrome |
| Left-hand / Right-hand Traffic | for left-hand traffic |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Left |
| Bulb Type | H7/H1 |
| Registration Type | ECE approved |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Housing Colour | chrome |
| Left-hand / Right-hand Traffic | for left-hand traffic |
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
Important compatibility info
| Number of Thread Bores | 2 |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Manufacturer Restriction | Poonsung |
| Function | Starter |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 2 |
| Type | Starter |
| Rated Power | 2 kW |
| Manufacturer | HYUNDAI KIA |
Important compatibility info
| Number of Thread Bores | 2 |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Manufacturer Restriction | Poonsung |
| Function | Starter |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 2 |
| Type | Starter |
| Rated Power | 2 kW |
| Manufacturer | HYUNDAI KIA |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Bulb Type | H7/H7 |
| Light Function | without front fog light |
| Registration Type | ECE approved |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















