Car Parts & Accessories by Apec
Categories
Important compatibility info
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Number of mounting bores | 2 |
| Rated Power | 1 kW |
| Function | Starter |
| Model | IS200 |
| Manufacturer | LEXUS |
| Type | Starter |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Number of Thread Bores | 2 |
Important compatibility info
| Number of mounting bores | 2 |
| Rated Power | 1 kW |
| Function | Starter |
| Model | IS200 |
| Manufacturer | LEXUS |
| Type | Starter |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Number of Thread Bores | 2 |
Important compatibility info
| Function | Clutch Kit |
| Diameter | 210 mm |
| Type | Clutch Kit |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Function | Clutch Kit |
| Diameter | 210 mm |
| Type | Clutch Kit |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 28 |
| Placement on Vehicle | Front Axle Left |
| Length | 630 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
Important compatibility info
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 28 |
| Placement on Vehicle | Front Axle Left |
| Length | 630 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
| Diameter | 220 mm |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
| Diameter | 220 mm |
Important compatibility info
| Housing Type | with housing |
| Type | Water Pump, engine cooling |
| for OE number | 04C121600K |
| Function | Water Pump, engine cooling |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Important compatibility info
| Housing Type | with housing |
| Type | Water Pump, engine cooling |
| for OE number | 04C121600K |
| Function | Water Pump, engine cooling |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Important compatibility info
| Function | Water Pump, engine cooling |
| for OE number | 04E121600AG |
| Type | Water Pump, engine cooling |
| Housing Type | with housing |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Number of Teeth | 28 |
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 50 mm |
Important compatibility info
| Function | Water Pump, engine cooling |
| for OE number | 04E121600AG |
| Type | Water Pump, engine cooling |
| Housing Type | with housing |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Number of Teeth | 28 |
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 50 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Number of Poles | 2 -pin connector |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Mounting bores distance | 159 mm |
| for brake disc thickness | 25 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 45 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Number of Poles | 2 -pin connector |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Mounting bores distance | 159 mm |
| for brake disc thickness | 25 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 45 mm |
Important compatibility info
| Diameter | 220 mm |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Diameter | 220 mm |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Length 1 | 1693 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1693 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1681 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1681 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1655 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1655 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1653 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1653 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1654 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1654 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Function | Brake Caliper |
| Part number of recommended accessories | BBS2, BSC1 |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Solid |
| Brake System | TRW |
| Manufacturer | MERCEDES |
| for brake disc diameter | 258 mm |
| Piston diameter 1 | 30 mm |
| for brake disc thickness | 8 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














