Car Parts & Accessories by Apec
Categories
Important compatibility info
| Brake Disc Type | solid |
| Height | 45 mm |
| Outer diameter | 375 mm |
| Brake Disc Thickness | 45 mm |
| Brake System | Meritor VGT 195 |
| Centering Diameter | 181 mm |
| Packaging height | 9.5 cm |
| Packaging length | 41 cm |
| Packaging width | 39.5 cm |
| Type | Brake Disc |
| Function | Brake Disc |
| Extra Description | Apec Truck |
| Rotor Style | solid |
Important compatibility info
| Diameter | 250 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Diameter | 250 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Function | Alternator |
| Number of Ribs | 6 |
| Manufacturer Restriction | Valeo |
| Voltage | 12 V |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 56 mm |
| Type | Alternator |
| Manufacturer | AUDI FORD MITSUBISHI SEAT SKODA VOLKSWAGEN |
Important compatibility info
| Function | Alternator |
| Number of Ribs | 6 |
| Manufacturer Restriction | Valeo |
| Voltage | 12 V |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 56 mm |
| Type | Alternator |
| Manufacturer | AUDI FORD MITSUBISHI SEAT SKODA VOLKSWAGEN |
Important compatibility info
| Type | Exterior Mirror |
| Function | Exterior Mirror |
| Placement on Vehicle | Right |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Outer/Inner Mirror | Aspherical |
Important compatibility info
| Type | Exterior Mirror |
| Function | Exterior Mirror |
| Placement on Vehicle | Right |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Outer/Inner Mirror | Aspherical |
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 950 mm |
| External Teeth, Diff.Side | 27 |
| Length 2 | 400 mm |
| Placement on Vehicle | Front Axle Right |
| Manufacturer | MERCEDES |
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 950 mm |
| External Teeth, Diff.Side | 27 |
| Length 2 | 400 mm |
| Placement on Vehicle | Front Axle Right |
| Manufacturer | MERCEDES |
Important compatibility info
| Material | Grey Cast Iron |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Left |
| Brake Disc Type | Solid |
| Function | Brake Caliper |
| Piston diameter 1 | 54 mm |
| for brake disc thickness | 12 mm |
| Type | Brake Caliper |
Important compatibility info
| Material | Grey Cast Iron |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Left |
| Brake Disc Type | Solid |
| Function | Brake Caliper |
| Piston diameter 1 | 54 mm |
| for brake disc thickness | 12 mm |
| Type | Brake Caliper |
Important compatibility info
| Material | Grey Cast Iron |
| Brake Disc Type | Solid |
| Placement on Vehicle | behind the axle |
| Function | Brake Caliper |
| Model | ASTRA ZAFIRA |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| Manufacturer | OPEL VAUXHALL |
| Piston diameter 1 | 34 mm |
Important compatibility info
| Material | Grey Cast Iron |
| Brake Disc Type | Solid |
| Placement on Vehicle | behind the axle |
| Function | Brake Caliper |
| Model | ASTRA ZAFIRA |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| Manufacturer | OPEL VAUXHALL |
| Piston diameter 1 | 34 mm |
Important compatibility info
| Number of Teeth | 10 |
| Rated Power | 1.1 kW |
| Type | Starter |
| Number of mounting bores | 2 |
| Function | Starter |
| Rotation Direction | Anticlockwise rotation |
| Manufacturer Restriction | Valeo |
| Voltage | 12 V |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A3 ALTEA FABIA GOLF OCTAVIA TOLEDO |
Important compatibility info
| Number of Teeth | 10 |
| Rated Power | 1.1 kW |
| Type | Starter |
| Number of mounting bores | 2 |
| Function | Starter |
| Rotation Direction | Anticlockwise rotation |
| Manufacturer Restriction | Valeo |
| Voltage | 12 V |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A3 ALTEA FABIA GOLF OCTAVIA TOLEDO |
Important compatibility info
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Placement on Vehicle | Right |
| Bulb Type | H8 |
| Registration Type | ECE approved |
| Type | Front Fog Light |
| Function | Front Fog Light |
Important compatibility info
| Placement on Vehicle | Right |
| Bulb Type | H8 |
| Registration Type | ECE approved |
| Type | Front Fog Light |
| Function | Front Fog Light |
Important compatibility info
| Length 1 | 1853 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1853 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Brake Disc Type | Solid |
| Piston diameter 1 | 36 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| for brake disc thickness | 10 mm |
| Brake Caliper Type | Brake Caliper with 2 holding pins, Brake Caliper (2 pistons) |
| Piston diameter 2 | 36 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Grey Cast Iron |
| Brake System | ATE |
Important compatibility info
| Brake Disc Type | Solid |
| Piston diameter 1 | 36 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| for brake disc thickness | 10 mm |
| Brake Caliper Type | Brake Caliper with 2 holding pins, Brake Caliper (2 pistons) |
| Piston diameter 2 | 36 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Grey Cast Iron |
| Brake System | ATE |
Important compatibility info
| for brake disc thickness | 9 mm |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Brake System | Sumitomo |
| Piston diameter 1 | 36 mm |
| Placement on Vehicle | Rear Axle Left |
| Brake Disc Type | Solid |
| Type | Brake Caliper |
Important compatibility info
| for brake disc thickness | 9 mm |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Brake System | Sumitomo |
| Piston diameter 1 | 36 mm |
| Placement on Vehicle | Rear Axle Left |
| Brake Disc Type | Solid |
| Type | Brake Caliper |
Important compatibility info
| Brake System | Bosch |
| Brake Disc Type | Vented |
| Piston diameter 1 | 48 mm |
| Type | Brake Caliper |
| for brake disc thickness | 17 mm |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Caliper |
Important compatibility info
| Brake System | Bosch |
| Brake Disc Type | Vented |
| Piston diameter 1 | 48 mm |
| Type | Brake Caliper |
| for brake disc thickness | 17 mm |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Caliper |
Important compatibility info
| Brake Disc Type | Vented |
| Brake System | Aisin |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS8, BSC1 |
| Function | Brake Caliper |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Piston diameter 1 | 57 mm |
| Model | CELICA |
| Manufacturer | TOYOTA |
| for brake disc thickness | 25 mm |
Important compatibility info
| Brake Disc Type | Vented |
| Brake System | Aisin |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS8, BSC1 |
| Function | Brake Caliper |
| Placement on Vehicle | in front of axle |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Piston diameter 1 | 57 mm |
| Model | CELICA |
| Manufacturer | TOYOTA |
| for brake disc thickness | 25 mm |
Important compatibility info
| Type | Brake Caliper |
| Piston diameter 2 | 36 mm |
| Placement on Vehicle | Rear Axle Right |
| Brake System | ATE |
| for brake disc thickness | 10 mm |
| Function | Brake Caliper |
| Brake Disc Type | Solid |
| Piston diameter 1 | 36 mm |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper with 2 holding pins, Brake Caliper (2 pistons) |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















