Car Parts & Accessories by Apec
Categories
Important compatibility info
| Number of grooves | 6 |
| for steering manufacturer | SAGINAW |
| Type | Hydraulic Pump, steering |
| Additional Information | with reservoir |
| Belt Pulley Diameter | 125 mm |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
Important compatibility info
| Number of Thread Bores | 2 |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Manufacturer Restriction | Poonsung |
| Function | Starter |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 2 |
| Type | Starter |
| Rated Power | 2 kW |
| Manufacturer | HYUNDAI KIA |
Important compatibility info
| Number of Thread Bores | 2 |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Manufacturer Restriction | Poonsung |
| Function | Starter |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 2 |
| Type | Starter |
| Rated Power | 2 kW |
| Manufacturer | HYUNDAI KIA |
Important compatibility info
| Function | Shock Absorber |
| Diameter | 44 mm |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Spring-bearing Damper |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Height | 540 mm |
| Manufacturer | MAZDA |
| Model | MX5 |
| Compression Height | 369 mm |
Important compatibility info
| Function | Shock Absorber |
| Diameter | 44 mm |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Spring-bearing Damper |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Height | 540 mm |
| Manufacturer | MAZDA |
| Model | MX5 |
| Compression Height | 369 mm |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Piston diameter 1 | 41 mm |
| Material | Grey Cast Iron |
| Piston diameter 2 | 41 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Type | Brake Caliper |
| for brake disc thickness | 24 mm |
| Brake Disc Type | Vented |
| Brake System | Lockheed |
Important compatibility info
| Piston diameter 1 | 41 mm |
| Material | Grey Cast Iron |
| Piston diameter 2 | 41 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Type | Brake Caliper |
| for brake disc thickness | 24 mm |
| Brake Disc Type | Vented |
| Brake System | Lockheed |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Manufacturer | MAZDA |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| Length | 635 mm |
| Model | 5 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Manufacturer | MAZDA |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| Length | 635 mm |
| Model | 5 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 110 A |
| Belt Pulley Diameter | 65 mm |
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Type | Alternator |
| Number of Ribs | 6 |
| Manufacturer | RENAULT |
| Model | KANGOO MEGANE SCENIC |
Important compatibility info
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 110 A |
| Belt Pulley Diameter | 65 mm |
| Function | Alternator |
| Manufacturer Restriction | Valeo |
| Type | Alternator |
| Number of Ribs | 6 |
| Manufacturer | RENAULT |
| Model | KANGOO MEGANE SCENIC |
Important compatibility info
| Length 1 | 1655 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1655 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Bulb Type | LED |
| Housing Colour | red |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Bulb Type | LED |
| Housing Colour | red |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Disc Type | Solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 11 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Disc Type | Solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 11 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Pulleys | without belt pulley |
| Voltage | 12 V |
| Number of Ribs | 4 |
| Manufacturer Restriction | Marelli |
| Alternator Charge Current | 75 A |
| Type | Alternator |
| Function | Alternator |
| Belt Pulley Diameter | 58 mm |
| Manufacturer | SMART |
| Model | CITY CROSSBLADE FORTWO ROADSTER |
| Number of Poles | 3 -pin connector |
Important compatibility info
| Pulleys | without belt pulley |
| Voltage | 12 V |
| Number of Ribs | 4 |
| Manufacturer Restriction | Marelli |
| Alternator Charge Current | 75 A |
| Type | Alternator |
| Function | Alternator |
| Belt Pulley Diameter | 58 mm |
| Manufacturer | SMART |
| Model | CITY CROSSBLADE FORTWO ROADSTER |
| Number of Poles | 3 -pin connector |
Important compatibility info
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 80 A |
| Type | Alternator |
| Number of Ribs | 6 |
| Manufacturer Restriction | Hitachi |
| Function | Alternator |
| Manufacturer | NISSAN |
| Model | ALMERA PRIMERA |
Important compatibility info
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 80 A |
| Type | Alternator |
| Number of Ribs | 6 |
| Manufacturer Restriction | Hitachi |
| Function | Alternator |
| Manufacturer | NISSAN |
| Model | ALMERA PRIMERA |
Important compatibility info
| Function | Starter |
| Rated Power | 1.8 kW |
| Voltage | 12 V |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Manufacturer | JAGUAR |
| Model | F TYPE F-TYPE XF XJ |
| Number of Teeth | 9 |
Important compatibility info
| Function | Starter |
| Rated Power | 1.8 kW |
| Voltage | 12 V |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Manufacturer | JAGUAR |
| Model | F TYPE F-TYPE XF XJ |
| Number of Teeth | 9 |
Important compatibility info
| Piston diameter 1 | 38 mm |
| Function | Brake Caliper |
| Brake Disc Type | Solid |
| Brake System | TRW |
| Placement on Vehicle | behind the axle |
| Model | 3008 5008 508 DS5 |
| Manufacturer | CITROEN DS PEUGEOT |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| for brake disc thickness | 12 mm |
| for brake disc diameter | 268 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023













