Car Parts & Accessories by Apec
Categories
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Vehicle Equipment | for vehicles with back doors |
| Lens Colour | red |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Vehicle Equipment | for vehicles with back doors |
| Lens Colour | red |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Vehicle Equipment | for vehicles with back doors |
| Lens Colour | red |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST2830 |
| Cone Size | 18 mm |
| Rod/Strut | Push Rod |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Steering arm type | Control Arm |
| Manufacturer | KIA |
| Model | RIO |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST2830 |
| Cone Size | 18 mm |
| Rod/Strut | Push Rod |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Steering arm type | Control Arm |
| Manufacturer | KIA |
| Model | RIO |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Rod/Strut | Push Rod |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Manufacturer | KIA |
| Model | RIO |
| Paired article numbers | AST2829 |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Rod/Strut | Push Rod |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Manufacturer | KIA |
| Model | RIO |
| Paired article numbers | AST2829 |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 20 mm |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 48 mm |
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 20 mm |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 48 mm |
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 20 mm |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 48 mm |
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 20 mm |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 48 mm |
Important compatibility info
| Type | Auxiliary Stop Light |
| Function | Auxiliary Stop Light |
| Placement on Vehicle | Rear |
| Bulb Type | LED |
Important compatibility info
| Type | Auxiliary Stop Light |
| Function | Auxiliary Stop Light |
| Placement on Vehicle | Rear |
| Bulb Type | LED |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | H8 |
| Light Function | with cornering light |
| Registration Type | ECE approved |
| Type | Front Fog Light |
| Function | Front Fog Light |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | H8 |
| Light Function | with cornering light |
| Registration Type | ECE approved |
| Type | Front Fog Light |
| Function | Front Fog Light |
Important compatibility info
| Placement on Vehicle | Right |
| Bulb Type | H8 |
| Light Function | with cornering light |
| Registration Type | ECE approved |
| Type | Front Fog Light |
| Function | Front Fog Light |
Important compatibility info
| Placement on Vehicle | Right |
| Bulb Type | H8 |
| Light Function | with cornering light |
| Registration Type | ECE approved |
| Type | Front Fog Light |
| Function | Front Fog Light |
Important compatibility info
| Internal Teeth, wheel side | 21 |
| Length 2 | 98 mm |
| Seal Diameter | 54 mm |
| External Teeth, Wheel Side | 25 |
| Diameter | 75 mm |
| Manufacturer | MITSUBISHI SMART |
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| Model | COLT FORFOUR |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 157 mm |
Important compatibility info
| Internal Teeth, wheel side | 21 |
| Length 2 | 98 mm |
| Seal Diameter | 54 mm |
| External Teeth, Wheel Side | 25 |
| Diameter | 75 mm |
| Manufacturer | MITSUBISHI SMART |
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| Model | COLT FORFOUR |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 157 mm |
Important compatibility info
| Manufacturer | KIA |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Model | SEDONA |
Important compatibility info
| Manufacturer | KIA |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Model | SEDONA |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| for OE number | 210101KC0A |
| Manufacturer | DACIA NISSAN RENAULT |
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 98 mm |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| for OE number | 210101KC0A |
| Manufacturer | DACIA NISSAN RENAULT |
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 98 mm |
Important compatibility info
| Brake Disc Type | internally vented |
| Height | 128 mm |
| Outer diameter | 304 mm |
| Additional Information 2 | without wheel hub, without wheel studs |
| Brake Disc Thickness | 30 mm |
| Bolt Hole Circle Diameter | 205 mm |
| Centering Diameter | 165 mm |
| Hole Arrangement / Number | 06/08 |
| Packaging height | 14.5 cm |
| Packaging length | 33.5 cm |
| Packaging width | 32 cm |
| Type | Brake Disc |
| Function | Brake Disc |
| Extra Description | Apec Truck |
| Rotor Style | internally vented |
Important compatibility info
| Brake Disc Type | internally vented |
| Height | 128 mm |
| Outer diameter | 304 mm |
| Additional Information 2 | without wheel hub, with wheel studs |
| Brake Disc Thickness | 30 mm |
| Bolt Hole Circle Diameter | 205 mm |
| Centering Diameter | 165 mm |
| Hole Arrangement / Number | 06/08 |
| Packaging height | 14.5 cm |
| Packaging length | 33.5 cm |
| Packaging width | 32 cm |
| Type | Brake Disc |
| Function | Brake Disc |
| Extra Description | Apec Truck |
| Rotor Style | internally vented |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber System | Twin-Tube |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber System | Twin-Tube |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Brake Disc Type | Solid |
| Brake System | TRW |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Manufacturer | OPEL VAUXHALL |
| Model | ASTRA COMBO MERIVA ZAFIRA |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















