Car Parts & Accessories by Apec
Categories
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber Design | Telescopic Shock Absorber |
| Diameter | 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Height | 599 mm |
| Manufacturer | RENAULT |
| Model | CLIO MODUS |
| Compression Height | 350 mm |
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Brake System | Bendix |
| Bore Diameter | 24 mm |
| Material | Grey Cast Iron |
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Brake System | Bendix |
| Bore Diameter | 24 mm |
| Material | Grey Cast Iron |
Important compatibility info
| Outer/Inner Mirror | with wide angle mirror, Convex |
| Number of Connectors / Ports | 2 |
| Type | Exterior Mirror |
| Light Function | with indicator |
| Function | Exterior Mirror |
| Driver Position | for right-hand drive vehicles |
| Operating Mode | Manual |
| Placement on Vehicle | Left |
Important compatibility info
| Outer/Inner Mirror | with wide angle mirror, Convex |
| Number of Connectors / Ports | 2 |
| Type | Exterior Mirror |
| Light Function | with indicator |
| Function | Exterior Mirror |
| Driver Position | for right-hand drive vehicles |
| Operating Mode | Manual |
| Placement on Vehicle | Left |
Important compatibility info
| Outer/Inner Mirror | with wide angle mirror, Convex |
| Light Function | with indicator |
| Type | Exterior Mirror |
| Number of Connectors / Ports | 2 |
| Driver Position | for right-hand drive vehicles |
| Function | Exterior Mirror |
| Operating Mode | Manual |
| Placement on Vehicle | Right |
Important compatibility info
| Outer/Inner Mirror | with wide angle mirror, Convex |
| Light Function | with indicator |
| Type | Exterior Mirror |
| Number of Connectors / Ports | 2 |
| Driver Position | for right-hand drive vehicles |
| Function | Exterior Mirror |
| Operating Mode | Manual |
| Placement on Vehicle | Right |
Important compatibility info
| Number of Teeth, ABS ring | 92 |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 82 mm |
| Type | Wheel Bearing Kit |
| Width 1 | 73 mm |
| Outer diameter 1 | 139 mm |
Important compatibility info
| Number of Teeth, ABS ring | 92 |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 82 mm |
| Type | Wheel Bearing Kit |
| Width 1 | 73 mm |
| Outer diameter 1 | 139 mm |
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 136 mm |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Manufacturer | VOLVO |
| Model | S60 S80 V70 |
| Width 1 | 90 mm |
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 136 mm |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Manufacturer | VOLVO |
| Model | S60 S80 V70 |
| Width 1 | 90 mm |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Thread Size | Bush 10.2, M12x1.75 |
| Width | 260 mm |
| Length | 320 mm |
| Placement on Vehicle | Upper, Front Axle Right |
| Steering arm type | Control Arm |
| Manufacturer | JAGUAR |
| Model | S TYPE XJ |
| Paired article numbers | AST2860 |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Thread Size | Bush 10.2, M12x1.75 |
| Width | 260 mm |
| Length | 320 mm |
| Placement on Vehicle | Upper, Front Axle Right |
| Steering arm type | Control Arm |
| Manufacturer | JAGUAR |
| Model | S TYPE XJ |
| Paired article numbers | AST2860 |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Lens Colour | smoke grey |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Lens Colour | smoke grey |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Height | 674 mm |
| Diameter | 40 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Manufacturer | MAZDA |
| Model | 2 |
| Shock Absorber System | Monotube |
| Compression Height | 412 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Height | 674 mm |
| Diameter | 40 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Manufacturer | MAZDA |
| Model | 2 |
| Shock Absorber System | Monotube |
| Compression Height | 412 mm |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Registration Type | ECE approved |
| Bulb Type | H7/HB3 |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
| Registration Type | ECE approved |
| Bulb Type | H7/HB3 |
| Placement on Vehicle | Left |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
Important compatibility info
| Registration Type | ECE approved |
| Bulb Type | H7/HB3 |
| Type | Headlight |
| Function | Headlight |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Placement on Vehicle | Right |
Important compatibility info
| Registration Type | ECE approved |
| Bulb Type | H7/HB3 |
| Type | Headlight |
| Function | Headlight |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Placement on Vehicle | Right |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 12 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 12 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 12 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 12 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
Important compatibility info
| Material | Grey Cast Iron |
| Brake System | TRW |
| Bore Diameter | 24 mm |
| Type | Brake Master Cylinder |
| Manufacturer | FORD |
| Model | COURIER FIESTA PUMA |
| Function | Brake Master Cylinder |
Important compatibility info
| Material | Grey Cast Iron |
| Brake System | TRW |
| Bore Diameter | 24 mm |
| Type | Brake Master Cylinder |
| Manufacturer | FORD |
| Model | COURIER FIESTA PUMA |
| Function | Brake Master Cylinder |
Important compatibility info
| Function | Drive Shaft |
| Model | FIESTA FOCUS |
| Manufacturer | FORD |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 23 |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Front Axle Left |
| Length | 630 mm |
Important compatibility info
| Function | Drive Shaft |
| Model | FIESTA FOCUS |
| Manufacturer | FORD |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 23 |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Front Axle Left |
| Length | 630 mm |
Important compatibility info
| External Teeth, Wheel Side | 38 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Length | 650 mm |
| Manufacturer | VOLKSWAGEN |
| Model | CARAVELLE TRANSPORTER |
| Placement on Vehicle | Front Axle Left |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















