Car Parts & Accessories by Apec
Categories
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Number of Thread Bores | 3 |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Type | Starter |
| Manufacturer Restriction | Valeo |
| Rated Power | 0.9 kW |
| Number of mounting bores | 3 |
| Function | Starter |
| Manufacturer | RENAULT |
| Model | CLIO LAGUNA MEGANE SCENIC |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 892 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 25 |
| Number of Teeth | 48 |
| Manufacturer | PEUGEOT |
| Model | 206 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 892 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 25 |
| Number of Teeth | 48 |
| Manufacturer | PEUGEOT |
| Model | 206 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Width | 23 mm |
| Outer diameter | 90 mm |
| Inner diameter | 40 mm |
| Width 2 | 28 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Width | 23 mm |
| Outer diameter | 90 mm |
| Inner diameter | 40 mm |
| Width 2 | 28 mm |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Length | 200 mm |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Wheel Side | 28 |
| Diameter | 103 mm |
| Internal Teeth, wheel side | 29 |
| Seal Diameter | 57 mm |
| Type | Joint, drive shaft |
| Function | Joint, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| Manufacturer | FORD |
| Model | TRANSIT TRANSIT TOURNEO |
Important compatibility info
| Length | 200 mm |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Wheel Side | 28 |
| Diameter | 103 mm |
| Internal Teeth, wheel side | 29 |
| Seal Diameter | 57 mm |
| Type | Joint, drive shaft |
| Function | Joint, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| Manufacturer | FORD |
| Model | TRANSIT TRANSIT TOURNEO |
Important compatibility info
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Model | SORENTO |
| Manufacturer | KIA |
| Placement on Vehicle | Upper, Front Axle Left |
| Paired article numbers | AST2500 |
Important compatibility info
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Model | SORENTO |
| Manufacturer | KIA |
| Placement on Vehicle | Upper, Front Axle Left |
| Paired article numbers | AST2500 |
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Number of Teeth | 48 |
| Length | 610 mm |
| Manufacturer | PEUGEOT |
| Model | 206 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Number of Teeth | 48 |
| Length | 610 mm |
| Manufacturer | PEUGEOT |
| Model | 206 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| for OE number | 1336CC |
| Function | Thermostat, coolant |
| Opening Temperature | 105 °C |
| Housing Type | Synthetic Material Housing |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Manufacturer | CITROEN PEUGEOT |
| Additionally Required Parts | ATH1007 |
Important compatibility info
| for OE number | 1336CC |
| Function | Thermostat, coolant |
| Opening Temperature | 105 °C |
| Housing Type | Synthetic Material Housing |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Manufacturer | CITROEN PEUGEOT |
| Additionally Required Parts | ATH1007 |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Number of Poles | 2 -pin connector |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 20 mm |
| for brake disc diameter | 300 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Number of Poles | 2 -pin connector |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 20 mm |
| for brake disc diameter | 300 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Number of Poles | 2 -pin connector |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 20 mm |
| for brake disc diameter | 300 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Number of Poles | 2 -pin connector |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 20 mm |
| for brake disc diameter | 300 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 36 mm |
Important compatibility info
| Length | 140 mm |
| Diameter | 72 mm |
| Number of Teeth | 44 |
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| Internal Teeth, wheel side | 19 |
| Seal Diameter | 52 mm |
| External Teeth, Wheel Side | 24 |
| Manufacturer | MAZDA |
| Model | DEMIO |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Length | 140 mm |
| Diameter | 72 mm |
| Number of Teeth | 44 |
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| Internal Teeth, wheel side | 19 |
| Seal Diameter | 52 mm |
| External Teeth, Wheel Side | 24 |
| Manufacturer | MAZDA |
| Model | DEMIO |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Length 1 | 1160 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1160 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Type | Wheel Bearing Kit |
| Inner diameter 1 | 30 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
| Manufacturer | VOLVO |
| Model | XC90 |
| Outer diameter 1 | 136 mm |
| Width 1 | 87 mm |
Important compatibility info
| Type | Wheel Bearing Kit |
| Inner diameter 1 | 30 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
| Manufacturer | VOLVO |
| Model | XC90 |
| Outer diameter 1 | 136 mm |
| Width 1 | 87 mm |
Important compatibility info
| Material | Grey Cast Iron |
| Thread Size | 12 X 1 (2) |
| Bore Diameter | 21 mm |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















