Car Parts & Accessories by Apec
Categories
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 26 mm |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 60 mm |
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 26 mm |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 60 mm |
Important compatibility info
| for OE number | 11537534521 |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Included in article number | ATH1007 |
| Housing Type | Synthetic Material Housing |
| Housing material | Plastic |
Important compatibility info
| for OE number | 11537534521 |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Included in article number | ATH1007 |
| Housing Type | Synthetic Material Housing |
| Housing material | Plastic |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| for OE number | 1112002301 |
| Manufacturer | MERCEDES |
| Model | C230 CLK230 SLK230 |
| Number of Wings | 4 |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| for OE number | 1112002301 |
| Manufacturer | MERCEDES |
| Model | C230 CLK230 SLK230 |
| Number of Wings | 4 |
Important compatibility info
| Brake Disc Type | internally vented |
| Height | 143 mm |
| Outer diameter | 330 mm |
| Additional Information 2 | with ABS sensor ring, without wheel hub, without wheel studs |
| Brake Disc Thickness | 34 mm |
| Number of Teeth | 80 |
| Bolt Hole Circle Diameter | 155 mm |
| Centering Diameter | 133 mm |
| Hole Arrangement / Number | 16/16 |
| Packaging height | 15.5 cm |
| Packaging length | 36 cm |
| Packaging width | 34.5 cm |
| Type | Brake Disc |
| Function | Brake Disc |
| Extra Description | Apec Truck |
| Rotor Style | internally vented |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Spring-bearing Damper |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | JAGUAR |
| Model | XJ6 XJS XJSC |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Spring-bearing Damper |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | JAGUAR |
| Model | XJ6 XJS XJSC |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Manufacturer | MAZDA |
| Model | 6 |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Manufacturer | MAZDA |
| Model | 6 |
Important compatibility info
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | HYUNDAI KIA |
| Model | ix35 SPORTAGE |
| Drive Type | All-wheel Drive |
Important compatibility info
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | HYUNDAI KIA |
| Model | ix35 SPORTAGE |
| Drive Type | All-wheel Drive |
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Manufacturer | ROVER |
| Model | 75 |
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Manufacturer | ROVER |
| Model | 75 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | AUDI SKODA VOLKSWAGEN |
| Model | A3 GOLF OCTAVIA |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | AUDI SKODA VOLKSWAGEN |
| Model | A3 GOLF OCTAVIA |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | AST3222 |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | AST3222 |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Left |
| Type | Shock Absorber |
| Manufacturer | KIA |
| Model | CARENS MAGENTIS |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Left |
| Type | Shock Absorber |
| Manufacturer | KIA |
| Model | CARENS MAGENTIS |
Important compatibility info
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Diameter | 38 mm |
| Compression Height | 325 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Height | 485 mm |
| Manufacturer | MERCEDES |
Important compatibility info
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Gas Pressure |
| Diameter | 38 mm |
| Compression Height | 325 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Height | 485 mm |
| Manufacturer | MERCEDES |
Important compatibility info
| Model | TRANSIT |
| Function | Brake Master Cylinder |
| Replaces | MCY336 |
| Type | Brake Master Cylinder |
| Bore Diameter | 25 mm |
| Brake System | Bosch |
| Material | Grey Cast Iron |
| Manufacturer | FORD |
Important compatibility info
| Model | TRANSIT |
| Function | Brake Master Cylinder |
| Replaces | MCY336 |
| Type | Brake Master Cylinder |
| Bore Diameter | 25 mm |
| Brake System | Bosch |
| Material | Grey Cast Iron |
| Manufacturer | FORD |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Shock Absorber Design | Damper with Rebound Spring |
| Shock Absorber Mounting Type | Top pin |
| Placement on Vehicle | Front Axle Right |
| Manufacturer | BMW |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Shock Absorber Design | Damper with Rebound Spring |
| Shock Absorber Mounting Type | Top pin |
| Placement on Vehicle | Front Axle Right |
| Manufacturer | BMW |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Damper with Rebound Spring |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | BMW |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Damper with Rebound Spring |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | BMW |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















