Car Parts & Accessories by Corteco
Categories
Important compatibility info
Material | ACM (Polyacrylate) |
Inner diameter 1 | 45 mm |
Height 1 | 11.5 mm |
Height 2 | 18.3 mm |
Outer diameter 1 | 102.3 mm |
Outer diameter 2 | 126 mm |
Swirl Type | Alternating Twist |
Dust Cover | with dust lip |
Function | Shaft Seal, differential |
Placement on Vehicle | Drive Axle |
Replaces | 01029708B |
Type | Shaft Seal, differential |
Important compatibility info
Material | ACM (Polyacrylate) |
Inner diameter 1 | 45 mm |
Height 1 | 11.5 mm |
Height 2 | 18.3 mm |
Outer diameter 1 | 102.3 mm |
Outer diameter 2 | 126 mm |
Swirl Type | Alternating Twist |
Dust Cover | with dust lip |
Function | Shaft Seal, differential |
Placement on Vehicle | Drive Axle |
Replaces | 01029708B |
Type | Shaft Seal, differential |
Important compatibility info
Function | Bolt Set, crankshaft pulley |
Type | Bolt Set, crankshaft pulley |
Thread Size | M12 |
Screw length below head | 75 mm |
Important compatibility info
Function | Bolt Set, crankshaft pulley |
Type | Bolt Set, crankshaft pulley |
Thread Size | M12 |
Screw length below head | 75 mm |
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Inner diameter 1 | 48 mm |
Height 1 | 9.3 mm |
Outer diameter 1 | 68 mm |
Swirl Type | Alternating Twist |
Dust Cover | with dust lip |
Function | Shaft Seal, wheel hub |
Type | Shaft Seal, wheel hub |
Placement on Vehicle | Front Axle |
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Inner diameter 1 | 48 mm |
Height 1 | 9.3 mm |
Outer diameter 1 | 68 mm |
Swirl Type | Alternating Twist |
Dust Cover | with dust lip |
Function | Shaft Seal, wheel hub |
Type | Shaft Seal, wheel hub |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Guide Sleeve, clutch |
Height 1 | 70 mm |
Type | Guide Sleeve, clutch |
Outer diameter 2 | 87 mm |
Outer diameter 1 | 58 mm |
Inner diameter 1 | 26.8 mm |
Material | FPM (fluoride rubber)/ACM (polyacrylate rubber) |
Important compatibility info
Function | Guide Sleeve, clutch |
Height 1 | 70 mm |
Type | Guide Sleeve, clutch |
Outer diameter 2 | 87 mm |
Outer diameter 1 | 58 mm |
Inner diameter 1 | 26.8 mm |
Material | FPM (fluoride rubber)/ACM (polyacrylate rubber) |
Important compatibility info
Material | FPM (fluoride rubber) |
Inner diameter 1 | 48 mm |
Height 1 | 8 mm |
Outer diameter 1 | 62 mm |
Dust Cover | with dust lip |
Placement on Vehicle | frontal sided |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Swirl Type | Right-hand Twist |
Important compatibility info
Material | FPM (fluoride rubber) |
Inner diameter 1 | 48 mm |
Height 1 | 8 mm |
Outer diameter 1 | 62 mm |
Dust Cover | with dust lip |
Placement on Vehicle | frontal sided |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Swirl Type | Right-hand Twist |
Important compatibility info
Material | ACM (Polyacrylate) |
Inner diameter 1 | 35 mm |
Height 1 | 8.1 mm |
Height 2 | 13.9 mm |
Outer diameter 1 | 73 mm |
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Important compatibility info
Material | ACM (Polyacrylate) |
Inner diameter 1 | 35 mm |
Height 1 | 8.1 mm |
Height 2 | 13.9 mm |
Outer diameter 1 | 73 mm |
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Important compatibility info
for OE number | 60811518 |
Placement on Vehicle | transmission sided |
Material | FPM (fluoride rubber) |
Additional Information 2 | with flange, with mounting sleeve |
Inner diameter 1 | 93 mm |
Height 1 | 12 mm |
Outer diameter 1 | 139.7 mm |
Outer diameter 2 | 172 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Important compatibility info
for OE number | 60811518 |
Placement on Vehicle | transmission sided |
Material | FPM (fluoride rubber) |
Additional Information 2 | with flange, with mounting sleeve |
Inner diameter 1 | 93 mm |
Height 1 | 12 mm |
Outer diameter 1 | 139.7 mm |
Outer diameter 2 | 172 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Important compatibility info
Placement on Vehicle | Lower, Rear |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Important compatibility info
Placement on Vehicle | Lower, Rear |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Important compatibility info
Placement on Vehicle | Rear |
Weight | 0.2 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Important compatibility info
Placement on Vehicle | Rear |
Weight | 0.2 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Important compatibility info
Weight | 0.5 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Important compatibility info
Weight | 0.5 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Important compatibility info
Material | ACM (Polyacrylate) |
Inner diameter 1 | 47 mm |
Height 1 | 10 mm |
Height 2 | 16.5 mm |
Outer diameter 1 | 80.1 mm |
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Important compatibility info
Material | ACM (Polyacrylate) |
Inner diameter 1 | 47 mm |
Height 1 | 10 mm |
Height 2 | 16.5 mm |
Outer diameter 1 | 80.1 mm |
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | NBR (nitrile butadiene rubber) |
Inner diameter 1 | 145 mm |
Height 1 | 8 mm |
Outer diameter 1 | 175 mm |
Dust Cover | with dust lip |
Type | Shaft Seal, wheel hub |
Function | Shaft Seal, wheel hub |
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | NBR (nitrile butadiene rubber) |
Inner diameter 1 | 145 mm |
Height 1 | 8 mm |
Outer diameter 1 | 175 mm |
Dust Cover | with dust lip |
Type | Shaft Seal, wheel hub |
Function | Shaft Seal, wheel hub |
Important compatibility info
Function | Shaft Seal, differential |
Placement on Vehicle | Rear Axle, Inlet |
Type | Shaft Seal, differential |
Dust Cover | with dust lip |
Height 1 | 12 mm |
Inner diameter 1 | 48 mm |
Material | FPM (fluoride rubber) |
Outer diameter 1 | 82 mm |
Swirl Type | Right-hand Twist |
Important compatibility info
Function | Shaft Seal, differential |
Placement on Vehicle | Rear Axle, Inlet |
Type | Shaft Seal, differential |
Dust Cover | with dust lip |
Height 1 | 12 mm |
Inner diameter 1 | 48 mm |
Material | FPM (fluoride rubber) |
Outer diameter 1 | 82 mm |
Swirl Type | Right-hand Twist |
Important compatibility info
Function | Holder, engine mounting system |
Type | Holder, engine mounting system |
Important compatibility info
Function | Holder, engine mounting system |
Type | Holder, engine mounting system |
Important compatibility info
Weight | 0.492 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Important compatibility info
Weight | 0.492 kg |
Function | Mounting, engine |
Type | Mounting, engine |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023