Car Parts & Accessories by Hella

Brief Information

*** The HELLA VALUEFIT principle: Quality tested by HELLA at a good price.

Brief Information

*** The HELLA VALUEFIT principle: Quality tested by HELLA at a good price.

• 1x Hella Lens, end outline marker light (9EL950315-061)
• 1x Hella Lens, end outline marker light (9EL950315-031)
• 1x Hella Cable Set, tail light assembly (8KA950073-001)

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

For flush mounting above or below 520 x 120 mm (2 or 3 lamps) and 340 x 240 mm (2 lamps) numberplates. Clear lens. Two M4 fixing screws. Depth required for flush fitting: 25 mm. Numberplate lamp with silver-coloured finish, without fixing screw

Brief Information

*** Original spare part

Technical Information

For flush mounting above or below 520 x 120 mm (2 or 3 lamps) and 340 x 240 mm (2 lamps) numberplates. Clear lens. Two M4 fixing screws. Depth required for flush fitting: 25 mm. Numberplate lamp with silver-coloured finish, without fixing screw

Brief Information

*** Original spare part

Brief Information

*** The HELLA VALUEFIT principle: Quality tested by HELLA at a good price.

Brief Information

*** Original spare part

Brief Information

*** Original spare part

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

• 1x Hella Squeeze Pliers (8PE008932-001)

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Brief Information

*** HELLA Electronics OE competence for over 60 years.

Brief Information

*** HELLA Electronics OE competence for over 60 years.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.