Car Parts & Accessories by NAPA
National Automotive Parts Association (NAPA) was created in 1925 to meet America’s need for an effective automotive parts distribution system. Today, NAPA is now sold in 9 countries worldwide – the United States of America, Canada, Mexico, Australia, New Zealand, France, Germany, Poland and the United Kingdom. Categories
Important compatibility info
| Diameter | 11.2 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 278 mm |
| Outer diameter | 127 mm |
| Spring Design | Mini Block |
| Diameter 3 | 12.3 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Thickness | 13.5 mm |
Important compatibility info
| Diameter | 11.2 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 278 mm |
| Outer diameter | 127 mm |
| Spring Design | Mini Block |
| Diameter 3 | 12.3 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Thickness | 13.5 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Function | Wheel Brake Cylinder |
| Piston Diameter | 22 mm |
| Type | Wheel Brake Cylinder |
| Thread Size | 10x1 |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle |
| Brake System | Tokico |
Important compatibility info
| Function | Wheel Brake Cylinder |
| Piston Diameter | 22 mm |
| Type | Wheel Brake Cylinder |
| Thread Size | 10x1 |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle |
| Brake System | Tokico |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
Important compatibility info
| Thickness/Strength 1 | 12 mm |
| Outer diameter | 149 mm |
| Length | 362 mm |
| Placement on Vehicle | Front Axle |
| Spring Design | Coil spring with inconstant wire diameter |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Thickness | 12.2 mm |
Important compatibility info
| Thickness/Strength 1 | 12 mm |
| Outer diameter | 149 mm |
| Length | 362 mm |
| Placement on Vehicle | Front Axle |
| Spring Design | Coil spring with inconstant wire diameter |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Thickness | 12.2 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inspection Tag | E1 90R-02D0854/1532 |
| Inner Brake Drum Height | 35 mm |
| Total Br. Drum Height | 55 mm |
| Inner Brake Drum Diameter | 200 mm |
| Type | Brake Drum |
| Function | Brake Drum |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inspection Tag | E1 90R-02D0854/1532 |
| Inner Brake Drum Height | 35 mm |
| Total Br. Drum Height | 55 mm |
| Inner Brake Drum Diameter | 200 mm |
| Type | Brake Drum |
| Function | Brake Drum |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 355 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 355 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 355 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Thread Measurement 1 | Male M10 x 1 |
| Thread Measurement 2 | 10mm Banjo |
| Length 1 | 355 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Inlet Diameter 1 | 8 mm |
| Outlet Diameter 1 | 8 mm |
| Outlet Ø 3 | 6 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 318 mm |
| Outer diameter | 70 mm |
| Filter type | In-Line Filter |
| Outlet Diameter 2 | 5 mm |
Important compatibility info
| Inlet Diameter 1 | 8 mm |
| Outlet Diameter 1 | 8 mm |
| Outlet Ø 3 | 6 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 318 mm |
| Outer diameter | 70 mm |
| Filter type | In-Line Filter |
| Outlet Diameter 2 | 5 mm |
Important compatibility info
| Additional Information 2 | with sensor, without thermostat |
| Type | Coolant Flange |
| for OE number | 1336X9 |
| Number of Poles | 2 -pin connector |
| Function | Coolant Flange |
| Additional Information | without gasket/seal |
Important compatibility info
| Additional Information 2 | with sensor, without thermostat |
| Type | Coolant Flange |
| for OE number | 1336X9 |
| Number of Poles | 2 -pin connector |
| Function | Coolant Flange |
| Additional Information | without gasket/seal |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Pulleys | without belt pulley |
| Number of Teeth | 19 |
| for OE number | 9618271 |
| Number of Wings | 11 |
| Water Pump Pulley Diameter | 57 mm |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Pulleys | without belt pulley |
| Number of Teeth | 19 |
| for OE number | 9618271 |
| Number of Wings | 11 |
| Water Pump Pulley Diameter | 57 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Wheel Bearing Kit |
| Diameter | 120 mm. 30 mm |
| Type | Wheel Bearing Kit |
| Extra Description | PROformer |
| Inner diameter 1 | 30 mm |
| Outer diameter 1 | 120 mm |
| Width 1 | 64 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Wheel Bearing Kit |
| Diameter | 120 mm. 30 mm |
| Type | Wheel Bearing Kit |
| Extra Description | PROformer |
| Inner diameter 1 | 30 mm |
| Outer diameter 1 | 120 mm |
| Width 1 | 64 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Number of grooves | 6 |
| Thread Size | M16 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
| Distance to first groove | 8 mm |
Important compatibility info
| Number of grooves | 6 |
| Thread Size | M16 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
| Distance to first groove | 8 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














