Car Parts & Accessories by Apec
Categories
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Suspension Spring |
| Spring Design | Coil spring with inconstant wire diameter |
| Function | Suspension Spring |
| Model | C3 |
| Manufacturer | CITROEN |
Important compatibility info
| Type | Exterior Mirror |
| Function | Exterior Mirror |
Important compatibility info
| Type | Exterior Mirror |
| Function | Exterior Mirror |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 42 mm |
| Manufacturer | FORD KIA MAZDA |
| Outer diameter 1 | 80 mm |
| Width 1 | 45 mm |
| Replaces | AWB1783 |
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter 1 | 42 mm |
| Manufacturer | FORD KIA MAZDA |
| Outer diameter 1 | 80 mm |
| Width 1 | 45 mm |
| Replaces | AWB1783 |
Important compatibility info
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
| Type | Cable Pull, parking brake |
| Length 2 | 1435 mm |
| Length 1 | 1710 mm |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Model | BIPPER FIORINO NEMO QUBO |
Important compatibility info
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
| Type | Cable Pull, parking brake |
| Length 2 | 1435 mm |
| Length 1 | 1710 mm |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Model | BIPPER FIORINO NEMO QUBO |
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Measurement 1 | Female M10 x 1 |
| Length 1 | 542 mm |
| Brake System | Star |
| Model | CAYENNE Q7 TOUAREG |
| Manufacturer | AUDI PORSCHE VOLKSWAGEN |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Measurement 1 | Female M10 x 1 |
| Length 1 | 542 mm |
| Brake System | Star |
| Model | CAYENNE Q7 TOUAREG |
| Manufacturer | AUDI PORSCHE VOLKSWAGEN |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Wheel Brake Cylinder |
| Piston Diameter | 22 mm |
| Material | Grey Cast Iron |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle |
| Manufacturer | FORD |
| Model | TRANSIT |
Important compatibility info
| Function | Wheel Brake Cylinder |
| Piston Diameter | 22 mm |
| Material | Grey Cast Iron |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle |
| Manufacturer | FORD |
| Model | TRANSIT |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Brake System | Akebono |
| Type | Accessory Kit, disc brake pad |
| Manufacturer | HONDA ROVER SUZUKI |
| Function | Accessory Kit, disc brake pad |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Brake System | Akebono |
| Type | Accessory Kit, disc brake pad |
| Manufacturer | HONDA ROVER SUZUKI |
| Function | Accessory Kit, disc brake pad |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Sensor Type | Active sensor |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Colour Coding | Black |
| Cable Length | 645 mm |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Sensor Type | Active sensor |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Colour Coding | Black |
| Cable Length | 645 mm |
Important compatibility info
| Manufacturer | BMW |
| Diameter | 356 mm |
| Material | Aluminium |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Placement on Vehicle | Front Axle Left |
| Model | X3 |
Important compatibility info
| Manufacturer | BMW |
| Diameter | 356 mm |
| Material | Aluminium |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Placement on Vehicle | Front Axle Left |
| Model | X3 |
Important compatibility info
| Centering Diameter | 57 mm |
| Inner Brake Drum Diameter | 230 mm |
| Type | Brake Drum |
| Number of Holes | 4 |
| Inner Brake Drum Height | 50 mm |
| Total Br. Drum Height | 69 mm |
| Function | Brake Drum |
| Bolt Hole Circle Diameter | 100 mm |
| Br. Drum outer diameter | 265 mm |
| Placement on Vehicle | Rear Axle |
| Manufacturer | OPEL VAUXHALL |
| Model | ASTRA COMBO |
| Additional Information 2 | without wheel bearing |
Important compatibility info
| Centering Diameter | 57 mm |
| Inner Brake Drum Diameter | 230 mm |
| Type | Brake Drum |
| Number of Holes | 4 |
| Inner Brake Drum Height | 50 mm |
| Total Br. Drum Height | 69 mm |
| Function | Brake Drum |
| Bolt Hole Circle Diameter | 100 mm |
| Br. Drum outer diameter | 265 mm |
| Placement on Vehicle | Rear Axle |
| Manufacturer | OPEL VAUXHALL |
| Model | ASTRA COMBO |
| Additional Information 2 | without wheel bearing |
Important compatibility info
| Function | Cable Pull, parking brake |
| Length 2 | 1042 mm |
| Length 1 | 1355 mm |
| Type | Cable Pull, parking brake |
| Model | Mk3 |
| Manufacturer | RANGE ROVER |
| Placement on Vehicle | Right Rear |
Important compatibility info
| Function | Cable Pull, parking brake |
| Length 2 | 1042 mm |
| Length 1 | 1355 mm |
| Type | Cable Pull, parking brake |
| Model | Mk3 |
| Manufacturer | RANGE ROVER |
| Placement on Vehicle | Right Rear |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Important compatibility info
| Steering arm type | for control arm |
| Function | Ball Joint |
| Type | Ball Joint |
| Model | L200 PAJERO PAJERO/SHOGUN |
| Manufacturer | MITSUBISHI |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Thread Size | M16x1.5 |
| Paired article numbers | AST0043 |
Important compatibility info
| Steering arm type | for control arm |
| Function | Ball Joint |
| Type | Ball Joint |
| Model | L200 PAJERO PAJERO/SHOGUN |
| Manufacturer | MITSUBISHI |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Thread Size | M16x1.5 |
| Paired article numbers | AST0043 |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | Female M10 x 1 |
| Length 1 | 258 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | Female M10 x 1 |
| Length 1 | 258 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 33 |
| Diameter | 100 mm |
| Length | 32 mm |
| Manufacturer | AUDI PORSCHE SEAT SKODA VOLKSWAGEN |
Important compatibility info
| Function | Joint, drive shaft |
| Type | Joint, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 33 |
| Diameter | 100 mm |
| Length | 32 mm |
| Manufacturer | AUDI PORSCHE SEAT SKODA VOLKSWAGEN |
Important compatibility info
| Placement on Vehicle | Left |
| Outer/Inner Mirror | Aspherical |
| Fastening Type | Self-adhesive |
| Type | Mirror Glass, exterior mirror |
| Function | Mirror Glass, exterior mirror |
| Title | APEC Replacement Stick-On Wide Angle Vehicle Mirror Glass LHS |
Additional Information
- Engineered for Durability – APEC Replacement Mirror Glass is constructed using high-quality materials to ensure long-term reliability. Designed to endure the demands of daily driving, it resists weathering, temperature fluctuations, and environmental stressors for consistent performance over time.
- Enhanced Visibility - APEC mirror glass provides distortion-free reflections, offering optimal visibility and safety for you while on the road.
- Vehicle-Specific Compatibility - APEC Replacement Mirror Glass is manufactured to precise OEM specifications for your vehicle’s exact make and model, ensuring accurate alignment, secure fitment, and optimal mirror performance.
- Mirror glass features a blind-spot section to improve visibilty of your vehicle blindspots
- Packaging – Safely packed in eco-friendly cardboard boxes to ensure protection during shipping and easy recycling.
- OEM Quality - Crafted with high-quality materials and manufacturing standards, APEC mirror glass matches the quality of your original mirror glass.
- Simplified Installation – Featuring a pre-applied adhesive backing and tailored to match your vehicle’s original mirror design, APEC Replacement Mirror Glass allows for quick, secure, and tool-free installation - no professional fitting or specialised equipment required.
- Replacement door mirror glass
- high-strength adhesive pad
- convex mirror glass
- precision-cut
- smooth-finished edges
- vehicle-specific
- no tools required
- blind spot
Important compatibility info
| Placement on Vehicle | Left |
| Outer/Inner Mirror | Aspherical |
| Fastening Type | Self-adhesive |
| Type | Mirror Glass, exterior mirror |
| Function | Mirror Glass, exterior mirror |
| Title | APEC Replacement Stick-On Wide Angle Vehicle Mirror Glass LHS |
Additional Information
- Engineered for Durability – APEC Replacement Mirror Glass is constructed using high-quality materials to ensure long-term reliability. Designed to endure the demands of daily driving, it resists weathering, temperature fluctuations, and environmental stressors for consistent performance over time.
- Enhanced Visibility - APEC mirror glass provides distortion-free reflections, offering optimal visibility and safety for you while on the road.
- Vehicle-Specific Compatibility - APEC Replacement Mirror Glass is manufactured to precise OEM specifications for your vehicle’s exact make and model, ensuring accurate alignment, secure fitment, and optimal mirror performance.
- Mirror glass features a blind-spot section to improve visibilty of your vehicle blindspots
- Packaging – Safely packed in eco-friendly cardboard boxes to ensure protection during shipping and easy recycling.
- OEM Quality - Crafted with high-quality materials and manufacturing standards, APEC mirror glass matches the quality of your original mirror glass.
- Simplified Installation – Featuring a pre-applied adhesive backing and tailored to match your vehicle’s original mirror design, APEC Replacement Mirror Glass allows for quick, secure, and tool-free installation - no professional fitting or specialised equipment required.
- Replacement door mirror glass
- high-strength adhesive pad
- convex mirror glass
- precision-cut
- smooth-finished edges
- vehicle-specific
- no tools required
- blind spot
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















