Car Parts & Accessories by Apec
Categories
Important compatibility info
| Function | Joint, drive shaft |
| Internal Teeth, wheel side | 39 |
| Seal Diameter | 63 mm |
| Diameter | 100 mm |
| External Teeth, Wheel Side | 28 |
| Number of Teeth | 54 |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Length | 176 mm |
| Type | Joint, drive shaft |
| Model | BOXER DUCATO RELAY |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Function | Joint, drive shaft |
| Internal Teeth, wheel side | 39 |
| Seal Diameter | 63 mm |
| Diameter | 100 mm |
| External Teeth, Wheel Side | 28 |
| Number of Teeth | 54 |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Length | 176 mm |
| Type | Joint, drive shaft |
| Model | BOXER DUCATO RELAY |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Steering arm type | Control Arm |
| Paired article numbers | AST3113 |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Steering arm type | Control Arm |
| Paired article numbers | AST3113 |
Important compatibility info
| Placement on Vehicle | outer, Rear Axle Left, Rear Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST3122 |
Important compatibility info
| Placement on Vehicle | outer, Rear Axle Left, Rear Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST3122 |
Important compatibility info
| Additional Information 2 | with integrated magnetic sensor ring |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Manufacturer | MAZDA |
| Model | 3 5 6 |
| Placement on Vehicle | Front Axle |
| Inner diameter 1 | 42 mm |
| Outer diameter 1 | 80 mm |
| Width 1 | 45 mm |
Important compatibility info
| Additional Information 2 | with integrated magnetic sensor ring |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Manufacturer | MAZDA |
| Model | 3 5 6 |
| Placement on Vehicle | Front Axle |
| Inner diameter 1 | 42 mm |
| Outer diameter 1 | 80 mm |
| Width 1 | 45 mm |
Important compatibility info
| Brake System | Mazda |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, bsc1 |
| for brake disc thickness | 23 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Brake Disc Type | Vented |
| Material | Grey Cast Iron |
| Piston diameter 1 | 54 mm |
| for brake disc diameter | 258 mm |
Important compatibility info
| Brake System | Mazda |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, bsc1 |
| for brake disc thickness | 23 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Brake Disc Type | Vented |
| Material | Grey Cast Iron |
| Piston diameter 1 | 54 mm |
| for brake disc diameter | 258 mm |
Important compatibility info
| Brake Disc Type | Vented |
| for brake disc diameter | 258 mm |
| Piston diameter 1 | 54 mm |
| Function | Brake Caliper |
| for brake disc thickness | 23 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS5, BSC1 |
| Brake System | Mazda |
| Type | Brake Caliper |
| Material | Grey Cast Iron |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Brake Disc Type | Vented |
| for brake disc diameter | 258 mm |
| Piston diameter 1 | 54 mm |
| Function | Brake Caliper |
| for brake disc thickness | 23 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS5, BSC1 |
| Brake System | Mazda |
| Type | Brake Caliper |
| Material | Grey Cast Iron |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Function | Bracket, brake caliper |
| Placement on Vehicle | Rear Axle Left |
| Brake System | TRW |
| Type | Bracket, brake caliper |
| Manufacturer | SEAT VOLKSWAGEN |
Important compatibility info
| Function | Bracket, brake caliper |
| Placement on Vehicle | Rear Axle Left |
| Brake System | TRW |
| Type | Bracket, brake caliper |
| Manufacturer | SEAT VOLKSWAGEN |
Important compatibility info
| Model | CIVIC |
| Manufacturer | HONDA |
| Thread Measurement 1 | Female M10 x 1 |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Hose |
| Type | Brake Hose |
| Length 1 | 557 mm |
| Thread Measurement 2 | 10mm Banjo |
Important compatibility info
| Model | CIVIC |
| Manufacturer | HONDA |
| Thread Measurement 1 | Female M10 x 1 |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Hose |
| Type | Brake Hose |
| Length 1 | 557 mm |
| Thread Measurement 2 | 10mm Banjo |
Important compatibility info
| Function | Brake Hose |
| Length 1 | 557 mm |
| Model | CIVIC |
| Type | Brake Hose |
| Manufacturer | HONDA |
| Thread Measurement 2 | 10mm Banjo |
| Placement on Vehicle | Front Axle Right |
| Thread Measurement 1 | Female M10 x 1 |
Important compatibility info
| Function | Brake Hose |
| Length 1 | 557 mm |
| Model | CIVIC |
| Type | Brake Hose |
| Manufacturer | HONDA |
| Thread Measurement 2 | 10mm Banjo |
| Placement on Vehicle | Front Axle Right |
| Thread Measurement 1 | Female M10 x 1 |
Important compatibility info
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle |
| Type | Suspension Strut Support Mount |
| Manufacturer | HYUNDAI |
| Model | ACCENT GETZ |
Important compatibility info
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle |
| Type | Suspension Strut Support Mount |
| Manufacturer | HYUNDAI |
| Model | ACCENT GETZ |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Poles | 2 -pin connector |
| Sensor Type | Passive sensor |
| Cable Length | 920 mm |
| Colour Coding | Black |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Poles | 2 -pin connector |
| Sensor Type | Passive sensor |
| Cable Length | 920 mm |
| Colour Coding | Black |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spring Design | Coil Spring |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Manufacturer | TOYOTA |
| Model | YARIS YARIS VERSO |
| for OE number | 1610029155 |
| Number of Wings | 6 |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Manufacturer | TOYOTA |
| Model | YARIS YARIS VERSO |
| for OE number | 1610029155 |
| Number of Wings | 6 |
Important compatibility info
| Spring Design | Coil spring with inconstant wire diameter |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Thickness | 14 mm |
Important compatibility info
| Spring Design | Coil spring with inconstant wire diameter |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Thickness | 14 mm |
Important compatibility info
| Diameter | 97 mm |
| External Teeth, Wheel Side | 28 |
| Function | Joint, drive shaft |
| Seal Diameter | 64 mm |
| Internal Teeth, wheel side | 32 |
| ABS Ring Diameter | 72 mm |
| Number of Teeth | 50 |
| Type | Joint, drive shaft |
| Length | 146 mm |
| Model | ACCORD CIVIC CR-V PRELUDE SHUTTLE STREAM |
| Manufacturer | HONDA |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Diameter | 97 mm |
| External Teeth, Wheel Side | 28 |
| Function | Joint, drive shaft |
| Seal Diameter | 64 mm |
| Internal Teeth, wheel side | 32 |
| ABS Ring Diameter | 72 mm |
| Number of Teeth | 50 |
| Type | Joint, drive shaft |
| Length | 146 mm |
| Model | ACCORD CIVIC CR-V PRELUDE SHUTTLE STREAM |
| Manufacturer | HONDA |
| Placement on Vehicle | Front Axle, Wheel Side |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














