Car Parts & Accessories by Apec
Categories
Important compatibility info
| Function | Brake Shoe Set, parking brake |
| Placement on Vehicle | Rear Axle |
| Width | 45 mm |
| Inner Brake Drum Diameter | 229 mm |
| Type | Brake Shoe Set, parking brake |
| Manufacturer | TOYOTA |
| Model | LAND CRUISER LAND CRUISER AMAZON |
Important compatibility info
| Manufacturer | FORD |
| Model | FIESTA |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
| Sensor Type | Active sensor |
| Number of Poles | 2 -pin connector |
| Cable Length | 765 mm |
Important compatibility info
| Manufacturer | FORD |
| Model | FIESTA |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
| Sensor Type | Active sensor |
| Number of Poles | 2 -pin connector |
| Cable Length | 765 mm |
Important compatibility info
| Placement on Vehicle | Left Exterior Mirror |
| Type | Direction Indicator |
| Function | Direction Indicator |
Important compatibility info
| Placement on Vehicle | Right Exterior Mirror |
| Type | Direction Indicator |
| Function | Direction Indicator |
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing material | Plastic |
| Housing Type | Synthetic Material Housing |
| Additional Information 2 | without sensor |
| Opening Temperature | 88 °C |
| for OE number | PEL000090 |
| Manufacturer | LAND ROVER MG ROVER |
| Model | 75 FREELANDER MGZT |
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing material | Plastic |
| Housing Type | Synthetic Material Housing |
| Additional Information 2 | without sensor |
| Opening Temperature | 88 °C |
| for OE number | PEL000090 |
| Manufacturer | LAND ROVER MG ROVER |
| Model | 75 FREELANDER MGZT |
Important compatibility info
| Type | Joint, drive shaft |
| Diameter | 98 mm |
| External Teeth, Wheel Side | 35 |
| Seal Diameter | 72 mm |
| Function | Joint, drive shaft |
| Internal Teeth, wheel side | 27 |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 196 mm |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Model | BOXER DUCATO RELAY |
Important compatibility info
| Type | Joint, drive shaft |
| Diameter | 98 mm |
| External Teeth, Wheel Side | 35 |
| Seal Diameter | 72 mm |
| Function | Joint, drive shaft |
| Internal Teeth, wheel side | 27 |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 196 mm |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Model | BOXER DUCATO RELAY |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Diameter | 54 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Compression Height | 382 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Height | 587 mm |
| Manufacturer | CHEVROLET OPEL VAUXHALL |
| Model | ASTRA CRUZE INSIGNIA ORLANDO |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Diameter | 54 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Compression Height | 382 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Height | 587 mm |
| Manufacturer | CHEVROLET OPEL VAUXHALL |
| Model | ASTRA CRUZE INSIGNIA ORLANDO |
Important compatibility info
| Diameter | 54 mm |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Left |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Height | 587 mm |
| Manufacturer | CHEVROLET OPEL VAUXHALL |
| Model | ASTRA CRUZE INSIGNIA ORLANDO |
| Compression Height | 382 mm |
Important compatibility info
| Diameter | 54 mm |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Left |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Height | 587 mm |
| Manufacturer | CHEVROLET OPEL VAUXHALL |
| Model | ASTRA CRUZE INSIGNIA ORLANDO |
| Compression Height | 382 mm |
Important compatibility info
| Housing Type | Metal Housing |
| Type | Thermostat, coolant |
| Housing material | Aluminium |
| Additional Information | with gasket/seal |
| Function | Thermostat, coolant |
| Number of sensors | 1 |
| Opening Temperature | 80 °C |
| Number of Poles | 1 -pin connector. 2 -pin connector |
| for OE number | 1338272 |
| Manufacturer | ABARTH ALFA ROMEO CHRYSLER FIAT |
| Model | BRAVO DELTA DOBLO GRANDE PUNTO MITO |
Important compatibility info
| Housing Type | Metal Housing |
| Type | Thermostat, coolant |
| Housing material | Aluminium |
| Additional Information | with gasket/seal |
| Function | Thermostat, coolant |
| Number of sensors | 1 |
| Opening Temperature | 80 °C |
| Number of Poles | 1 -pin connector. 2 -pin connector |
| for OE number | 1338272 |
| Manufacturer | ABARTH ALFA ROMEO CHRYSLER FIAT |
| Model | BRAVO DELTA DOBLO GRANDE PUNTO MITO |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Brake Disc Type | solid |
| Brake System | Tokico |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Brake Disc Type | solid |
| Brake System | Tokico |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
| Brake Disc Type | solid |
| Brake System | Tokico |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Grey Cast Iron |
| Brake Disc Type | solid |
| Brake System | Tokico |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Indicator colour lens | white |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Registration Type | ECE approved |
| Indicator colour lens | white |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| for OE number | 1872633 |
| Housing material | Plastic |
| Additional Information | with gaskets/seals |
| Opening Temperature | 92 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Manufacturer | FORD |
| Function | Thermostat, coolant |
Important compatibility info
| for OE number | 1872633 |
| Housing material | Plastic |
| Additional Information | with gaskets/seals |
| Opening Temperature | 92 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Manufacturer | FORD |
| Function | Thermostat, coolant |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter 1 | 50 mm |
| Width 1 | 51 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Manufacturer | MERCEDES |
| Model | VIANO VITO |
| Outer diameter 1 | 92 mm |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter 1 | 50 mm |
| Width 1 | 51 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Manufacturer | MERCEDES |
| Model | VIANO VITO |
| Outer diameter 1 | 92 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | Advics |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 22 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 54 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | Advics |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 22 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 54 mm |
Important compatibility info
| Part number of recommended accessories | BBS2, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 48 mm |
| for brake disc thickness | 22 mm |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Grey Cast Iron |
| Placement on Vehicle | in front of axle |
| Brake Disc Type | Vented |
| Type | Brake Caliper |
Important compatibility info
| Part number of recommended accessories | BBS2, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 48 mm |
| for brake disc thickness | 22 mm |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Grey Cast Iron |
| Placement on Vehicle | in front of axle |
| Brake Disc Type | Vented |
| Type | Brake Caliper |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Type | Vented |
| Brake System | Advics |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 22 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 54 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















