Car Parts & Accessories by Apec
Categories
Important compatibility info
| Manufacturer | MAZDA |
| Function | Sensor, wheel speed |
| Model | MX5 |
| Number of Poles | 2 -pin connector |
| Cable Length | 1088 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Sensor, wheel speed |
| Sensor Type | Passive sensor |
Important compatibility info
| Thread Measurement 2 | 10mm Banjo |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Hose |
| Type | Brake Hose |
| Length 1 | 570 mm |
| Thread Measurement 1 | Male M10 x 1 |
Important compatibility info
| Thread Measurement 2 | 10mm Banjo |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Hose |
| Type | Brake Hose |
| Length 1 | 570 mm |
| Thread Measurement 1 | Male M10 x 1 |
Important compatibility info
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Manufacturer | CITROEN PEUGEOT |
| Model | 5008 C4 |
Important compatibility info
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Manufacturer | CITROEN PEUGEOT |
| Model | 5008 C4 |
Important compatibility info
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Placement on Vehicle | Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | CITROEN PEUGEOT |
| Model | 5008 C4 |
Important compatibility info
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Placement on Vehicle | Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Manufacturer | CITROEN PEUGEOT |
| Model | 5008 C4 |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Bulb Type | PS19W |
| Registration Type | ECE approved |
| Type | Rear Fog Light |
| Function | Rear Fog Light |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Bulb Type | PS19W |
| Registration Type | ECE approved |
| Type | Rear Fog Light |
| Function | Rear Fog Light |
Important compatibility info
| Placement on Vehicle | Left |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Left |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Model | 106 SAXO |
| External Teeth, Wheel Side | 21 |
| Length | 624 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Manufacturer | CITROEN PEUGEOT |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Model | 106 SAXO |
| External Teeth, Wheel Side | 21 |
| Length | 624 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Manufacturer | CITROEN PEUGEOT |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Model | XC90 |
| Sensor Type | Active sensor |
| Manufacturer | VOLVO |
| Type | Sensor, wheel speed |
| Number of Poles | 2 -pin connector |
| Cable Length | 1264 mm |
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Model | XC90 |
| Sensor Type | Active sensor |
| Manufacturer | VOLVO |
| Type | Sensor, wheel speed |
| Number of Poles | 2 -pin connector |
| Cable Length | 1264 mm |
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST3153 |
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | AST3153 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Steering arm type | Control Arm |
| Manufacturer | MERCEDES |
| Model | CLS220 CLS250 CLS350 CLS400 CLS63 AMG |
| Paired article numbers | AST2880 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Steering arm type | Control Arm |
| Manufacturer | MERCEDES |
| Model | CLS220 CLS250 CLS350 CLS400 CLS63 AMG |
| Paired article numbers | AST2880 |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Spring Design | Coil spring with inconstant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
Important compatibility info
| Length | 160 mm |
| Length 2 | 96 mm |
| Type | Joint, drive shaft |
| Function | Joint, drive shaft |
| Internal Teeth, wheel side | 27 |
| Seal Diameter | 68 mm |
| External Teeth, Wheel Side | 31 |
| Diameter | 92 mm |
| Manufacturer | LAND ROVER RANGE ROVER |
| Model | DISCOVERY SPORT EVOQUE SPORT |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Length | 160 mm |
| Length 2 | 96 mm |
| Type | Joint, drive shaft |
| Function | Joint, drive shaft |
| Internal Teeth, wheel side | 27 |
| Seal Diameter | 68 mm |
| External Teeth, Wheel Side | 31 |
| Diameter | 92 mm |
| Manufacturer | LAND ROVER RANGE ROVER |
| Model | DISCOVERY SPORT EVOQUE SPORT |
| Placement on Vehicle | Front Axle, Wheel Side |
Important compatibility info
| Function | Brake Force Regulator |
| Material | Grey Cast Iron |
| Thread Size | 10 X 1 (2), 12 x 1 (2) |
| Brake System | ATE |
| Type | Brake Force Regulator |
Important compatibility info
| Function | Brake Force Regulator |
| Material | Grey Cast Iron |
| Thread Size | 10 X 1 (2), 12 x 1 (2) |
| Brake System | ATE |
| Type | Brake Force Regulator |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 26 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS2, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 57 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Brake Disc Type | Vented |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 26 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS2, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 57 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Brake Disc Type | solid |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS4, BSC1 |
| Function | Brake Caliper |
| Piston diameter 1 | 38 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















