Car Parts & Accessories by Hella
Categories
Important compatibility info
| Placement on Vehicle | Front, Rear |
| Additional Information | with gasket/seal |
| Number of Poles | 3 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Number of Poles | 3 -pin connector |
| Mounting Type | Bolted |
| Sensor Type | Hall Sensor |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Number of Poles | 3 -pin connector |
| Mounting Type | Bolted |
| Sensor Type | Hall Sensor |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED) |
| Light Design | LED |
| Mounting Type | Fitting |
| Cable Length | 5000 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Number of LEDs | 1 |
| Type | Position Light |
| Function | Position Light |
| Placement on Vehicle | Front |
| Length | 79 mm |
| Height | 23 mm |
| Width | 26 mm |
| Housing Colour | black |
| Fastening Type | for horizontal fastening |
| Power Consumption | 0.5 W |
| LED Colour | yellow (amber) |
| Fulfils ECE norm | R7 |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
| Placement on Vehicle | outer, Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
- 1x Hella Licence Plate Light (2KA010278-181)
Important compatibility info
| Placement on Vehicle | outer, Lateral Mounting |
| Length | 93 mm |
| Height | 63 mm |
| Width | 66 mm |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with licence plate light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Bolted, mounting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ADR/GGVS approved |
| Plug Type | Blade Terminal |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Licence Plate Light |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
- 1x Hella Licence Plate Light (2KA010278-181)
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 3 -pin connector |
| Mounting Type | Fitting |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| for PR number | 7X1 |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 3 -pin connector |
| Mounting Type | Fitting |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| for PR number | 7X1 |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Front |
| Number of Poles | 3 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Front |
| Number of Poles | 3 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Voltage | 12 V |
| Number of Poles | 2 -pin connector |
| Sensor Type | Hall Sensor |
| Cable Length | 858 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Voltage | 12 V |
| Number of Poles | 2 -pin connector |
| Sensor Type | Hall Sensor |
| Cable Length | 858 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Cable Length | 655 mm |
| Placement on Vehicle | Rear Axle |
| Sensor Type | Hall Sensor |
| Number of Poles | 2 -pin connector |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Cable Length | 655 mm |
| Placement on Vehicle | Rear Axle |
| Sensor Type | Hall Sensor |
| Number of Poles | 2 -pin connector |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Light Design | Halogen |
| Placement on Vehicle | Left, Right |
| Bulb Type | H10W |
| Additional Information | with bulb |
| Function | Reflector, position/end outline marker light |
| Type | Reflector, position/end outline marker light |
| Rated Power | 10 W |
Additional Information
- 1x Hella Bulb, park/position light (8GH002473-191)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Number of Poles | 2 -pin connector |
| Sensor Type | Hall Sensor |
| Cable Length | 935 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Number of Poles | 2 -pin connector |
| Sensor Type | Hall Sensor |
| Cable Length | 935 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Type | Actuator, headlight levelling |
| Function | Actuator, headlight levelling |
| Voltage | 12 V |
| Operating Mode | Electric |
Important compatibility info
| Type | Actuator, headlight levelling |
| Function | Actuator, headlight levelling |
| Voltage | 12 V |
| Operating Mode | Electric |
Important compatibility info
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 69 mm |
| Height | 6 mm |
| Width | 32 mm |
| Thickness | 6 mm |
| Additional Information 2 | with fastening material |
| Light Function | with reflector |
| Shape/Form | rectangular |
| Mounting Type | Glued, mounting |
| Quantity | 20 |
| Number of light functions | 1 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved, SAE approved, CCC approved |
| Fastening Type | for vertical fastening |
| Type | Reflector |
| Fulfils ECE norm | R3 |
| Function | Reflector |
| Effective reflective surface [cm²] | 18 cm² |
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 6 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | grey |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 6 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | grey |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 2 -pin connector |
| Colour | silver |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 2 -pin connector |
| Colour | silver |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 2 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Poles | 2 -pin connector |
| Shape/Form | angled |
| Mounting Type | Plugged |
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Type | Sensor, park distance control |
| Function | Sensor, park distance control |
| Socket colour | black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Length | 100 mm |
| DIN / ISO | 72 591 |
| Type | Base, worklight / Holder / Holder, rotating beacon |
| Function | Base, worklight / Holder / Holder, rotating beacon |
| Additional Information 2 | with top, with screw connection |
| Diameter | 24 mm |
| Number of Poles | 2 -pin connector |
Important compatibility info
| Voltage | 12 V |
| Placement on Vehicle | Rear Axle |
| Number of Poles | 2 -pin connector |
| Sensor Type | Hall Sensor |
| Cable Length | 193 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Voltage | 12 V |
| Placement on Vehicle | Rear Axle |
| Number of Poles | 2 -pin connector |
| Sensor Type | Hall Sensor |
| Cable Length | 193 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















