Car Parts & Accessories by Apec
Categories
Important compatibility info
| Additional Information | with gears |
| Chain Type | Simplex |
| Number of Chain Links | 130 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Important compatibility info
| Additional Information | with gears |
| Chain Type | Simplex |
| Number of Chain Links | 130 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Important compatibility info
| Type | Brake Caliper |
| Material | Grey Cast Iron |
| Part number of recommended accessories | BBS6, BSC1 |
| Brake Disc Type | Vented |
| Brake System | Akebono |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 26 mm |
| for brake disc diameter | 300 mm |
| Piston diameter 1 | 57 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Type | Brake Caliper |
| Material | Grey Cast Iron |
| Part number of recommended accessories | BBS6, BSC1 |
| Brake Disc Type | Vented |
| Brake System | Akebono |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 26 mm |
| for brake disc diameter | 300 mm |
| Piston diameter 1 | 57 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | LED |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Section | Outer section |
Important compatibility info
| Placement on Vehicle | Left |
| Bulb Type | LED |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Section | Outer section |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 1.5 kW |
| Number of mounting bores | 2 |
| Number of Thread Bores | 2 |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 1.5 kW |
| Number of mounting bores | 2 |
| Number of Thread Bores | 2 |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Function | Starter |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 25 |
| Length | 610 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| Manufacturer | CITROEN PEUGEOT |
| Model | BERLINGO C4 C4 GRAND PICASSO C4 PICASSO PARTNER |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 25 |
| Length | 610 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| Manufacturer | CITROEN PEUGEOT |
| Model | BERLINGO C4 C4 GRAND PICASSO C4 PICASSO PARTNER |
Important compatibility info
| Brake System | Tokico |
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Disc Type | Solid |
| Piston diameter 1 | 38 mm |
| for brake disc thickness | 10 mm |
Important compatibility info
| Brake System | Tokico |
| Placement on Vehicle | Rear Axle Left |
| Material | Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Disc Type | Solid |
| Piston diameter 1 | 38 mm |
| for brake disc thickness | 10 mm |
Important compatibility info
| Material | Aluminium |
| Brake Disc Type | Solid |
| Brake System | Tokico |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Material | Aluminium |
| Brake Disc Type | Solid |
| Brake System | Tokico |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 10 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Piston diameter 1 | 38 mm |
Important compatibility info
| Voltage | 12 V |
| Function | Alternator |
| Pulleys | for v-belt pulley |
| Alternator Charge Current | 65 A |
| Number of Ribs | 1 |
| Manufacturer Restriction | Lucas |
| Type | Alternator |
| Manufacturer | AUSTIN FORD LDV ROVER |
Important compatibility info
| Voltage | 12 V |
| Function | Alternator |
| Pulleys | for v-belt pulley |
| Alternator Charge Current | 65 A |
| Number of Ribs | 1 |
| Manufacturer Restriction | Lucas |
| Type | Alternator |
| Manufacturer | AUSTIN FORD LDV ROVER |
Important compatibility info
| Function | Clutch Kit |
| Additional Information | without central slave cylinder |
| Type | Clutch Kit |
| Diameter | 200 mm |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Function | Clutch Kit |
| Additional Information | without central slave cylinder |
| Type | Clutch Kit |
| Diameter | 200 mm |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Upper |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Model | DISCOVERY |
| Manufacturer | LAND ROVER |
| Paired article numbers | AST2297 |
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Upper |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Model | DISCOVERY |
| Manufacturer | LAND ROVER |
| Paired article numbers | AST2297 |
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Operating Mode | Mechanical |
| Manufacturer | MERCEDES |
| Model | SPRINTER |
| for OE number | 6512002101 |
| Number of Teeth | 6 |
| Number of Wings | 8 |
| Water Pump Pulley Diameter | 110 mm |
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Operating Mode | Mechanical |
| Manufacturer | MERCEDES |
| Model | SPRINTER |
| for OE number | 6512002101 |
| Number of Teeth | 6 |
| Number of Wings | 8 |
| Water Pump Pulley Diameter | 110 mm |
Important compatibility info
| Model | S TYPE XF |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Upper, Front Axle Right |
| Manufacturer | JAGUAR |
| Paired article numbers | AST2386 |
Important compatibility info
| Model | S TYPE XF |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Upper, Front Axle Right |
| Manufacturer | JAGUAR |
| Paired article numbers | AST2386 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Hydraulics Connection Diameter | 13 mm |
| Diameter | 190 mm |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Hydraulics Connection Diameter | 13 mm |
| Diameter | 190 mm |
Important compatibility info
| Manufacturer | JAGUAR |
| Height | 470 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Diameter | 52 mm |
| Model | X TYPE |
| Compression Height | 296 mm |
Important compatibility info
| Manufacturer | JAGUAR |
| Height | 470 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Diameter | 52 mm |
| Model | X TYPE |
| Compression Height | 296 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023













