Car Parts & Accessories by Hella
Categories
Important compatibility info
Voltage | 12 V |
Number of Poles | 4 -pin connector |
Resistance | 2080 Ohm |
Sensor Type | NTC Sensor |
Pressure to | 104500 Pa |
Pressure from | 17000 Pa |
Type | Sensor, intake manifold pressure |
Function | Sensor, intake manifold pressure |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Voltage | 12 V |
Number of Poles | 4 -pin connector |
Resistance | 2080 Ohm |
Sensor Type | NTC Sensor |
Pressure to | 104500 Pa |
Pressure from | 17000 Pa |
Type | Sensor, intake manifold pressure |
Function | Sensor, intake manifold pressure |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Shape/Form | Tetragonal |
Colour | White |
Mounting Type | Plugged, Clamped |
Chemical Properties | Paintable |
Type | Sensor, park distance control |
Function | Sensor, park distance control |
Socket colour | Black |
Number of Poles | 6 -pin connector |
Placement on Vehicle | both sides, Front, outer, Rear |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Shape/Form | Tetragonal |
Colour | White |
Mounting Type | Plugged, Clamped |
Chemical Properties | Paintable |
Type | Sensor, park distance control |
Function | Sensor, park distance control |
Socket colour | Black |
Number of Poles | 6 -pin connector |
Placement on Vehicle | both sides, Front, outer, Rear |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Additional Information | with holder |
Additional Information 2 | for trailer |
Voltage | 24 V |
Number of Poles | 6 -pin connector |
Operating Mode | Electronic |
Rated Power | 21 W |
Mounting Type | Plugged, Bolted |
Switching Capacity | 3+1x21W (8x21W) W |
Type | Flasher Unit |
Temperature range from | -40 °C |
Temperature range to | 85 °C |
Function | Flasher Unit |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Additional Information | with holder |
Additional Information 2 | for trailer |
Voltage | 24 V |
Number of Poles | 6 -pin connector |
Operating Mode | Electronic |
Rated Power | 21 W |
Mounting Type | Plugged, Bolted |
Switching Capacity | 3+1x21W (8x21W) W |
Type | Flasher Unit |
Temperature range from | -40 °C |
Temperature range to | 85 °C |
Function | Flasher Unit |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Mounting Type | Plugged, Clamped |
Chemical Properties | Paintable |
Type | Sensor, park distance control |
Socket colour | Black |
Function | Sensor, park distance control |
Shape/Form | Tetragonal |
Colour | Black |
Number of Poles | 6 -pin connector |
Placement on Vehicle | both sides, Front, outer, Rear |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Mounting Type | Plugged, Clamped |
Chemical Properties | Paintable |
Type | Sensor, park distance control |
Socket colour | Black |
Function | Sensor, park distance control |
Shape/Form | Tetragonal |
Colour | Black |
Number of Poles | 6 -pin connector |
Placement on Vehicle | both sides, Front, outer, Rear |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Placement on Vehicle | Left |
Additional Information | with bulb |
Voltage | 12 V |
Paired article numbers | 1N0 271 295-421 |
Bulb Type | HB4 |
Light Design | Bulb Technology |
Registration Type | ECE approved, SAE approved, CCC approved |
Type | Front Fog Light |
Function | Front Fog Light |
Replaces | 1N0271295-311 |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GH005636-121)
Important compatibility info
Placement on Vehicle | Left |
Additional Information | with bulb |
Voltage | 12 V |
Paired article numbers | 1N0 271 295-421 |
Bulb Type | HB4 |
Light Design | Bulb Technology |
Registration Type | ECE approved, SAE approved, CCC approved |
Type | Front Fog Light |
Function | Front Fog Light |
Replaces | 1N0271295-311 |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GH005636-121)
Important compatibility info
Socket colour | Black |
Function | Sensor, park distance control |
Type | Sensor, park distance control |
Chemical Properties | Paintable |
Mounting Type | Plugged |
Shape/Form | angled |
Number of Poles | 3 -pin connector |
Additional Information | with fastening ring |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Chemical Properties | Paintable |
Function | Sensor, park distance control |
Shape/Form | angled |
Placement on Vehicle | both sides, outer, Front |
Number of Poles | 3 -pin connector |
Mounting Type | Plugged |
Type | Sensor, park distance control |
Additional Information | with fastening ring |
Socket colour | Black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Chemical Properties | Paintable |
Function | Sensor, park distance control |
Shape/Form | angled |
Placement on Vehicle | both sides, outer, Front |
Number of Poles | 3 -pin connector |
Mounting Type | Plugged |
Type | Sensor, park distance control |
Additional Information | with fastening ring |
Socket colour | Black |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Cross Section to | 6.0 mm² |
Cross Section from | 1.5 mm² |
Function | Socket |
Temperature range to | +85 °C |
Cable diameter to | 16 mm |
Current strength to | 30 A |
Additional Information 2 | with protective cap/bellow |
Amperage from | 15 A |
DIN / ISO | 7638-1 |
Number of Poles | 7 -pin connector |
Plug Type | Screw Contact |
Braking / Drive Dynamics | for vehicles with ABS |
Protection Type (IP Code) | IP54 |
Type | Socket |
Cable diameter from | 9 mm |
Voltage | 24 V |
Quantity | 1 |
Colour | Black |
Temperature range from | -40 °C |
Important compatibility info
Placement on Vehicle | Right, Left |
Length | 264 mm |
Height | 133 mm |
Width | 133 mm |
Additional Information 2 | without bulbs |
Voltage | 24 V. 12 V |
Bulb Type | R5W |
Light Function | with taillight |
Housing Colour | Silver |
Light Design | Halogen |
Mounting Type | Fitting |
Number of light functions | 1 |
Lens Colour | Red |
Fastening Type | for horizontal fastening |
Plug Type | Blade Terminal |
Country Version | Europe |
Type | Tail Light |
Fulfils ECE norm | R7 |
Function | Tail Light |
Additional Information
Brief Information
*** Original spare part
Important compatibility info
Voltage | 12 V |
Placement on Vehicle | Front Axle |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Number of Poles | 2 -pin connector |
Cable Length | 570 mm |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Voltage | 12 V |
Placement on Vehicle | Front Axle |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Number of Poles | 2 -pin connector |
Cable Length | 570 mm |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Placement on Vehicle | Left, Lateral Mounting |
Voltage | 12 V. 24 V |
Number of Poles | 2 -pin connector |
Plug Type ID | EasyConn |
Bulb Type | LED |
Light Function | with position light (LED), with taillight (LED), with side marker light (LED) |
Light Design | LED |
Cable Length | 500 mm |
Number of light functions | 3 |
Registration Type | ADR/GGVS approved, ECE approved |
Number of LEDs | 4 |
Type | Clearance Light |
Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
Number of Poles | 2 -pin connector |
Colour | Black |
Shape/Form | Tetragonal |
Mounting Type | Plugged |
Chemical Properties | Paintable |
Type | Sensor, park distance control |
Function | Sensor, park distance control |
Socket colour | Black |
Shaft form | Square |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Number of Poles | 2 -pin connector |
Colour | Black |
Shape/Form | Tetragonal |
Mounting Type | Plugged |
Chemical Properties | Paintable |
Type | Sensor, park distance control |
Function | Sensor, park distance control |
Socket colour | Black |
Shaft form | Square |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Placement on Vehicle | Right, Lateral Mounting |
Voltage | 12 V. 24 V |
Plug Type ID | Quick Link |
Bulb Type | LED |
Light Function | with position light (LED), with taillight (LED), with side marker light (LED) |
Light Design | LED |
Cable Length | 500 mm |
Number of light functions | 3 |
Registration Type | ADR/GGVS approved, ECE approved |
Protection Type (IP Code) | IP6K9K |
Number of LEDs | 4 |
Type | Clearance Light |
Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
Placement on Vehicle | Right |
Additional Information | with bulb holder |
Additional Information 2 | with bulbs |
Voltage | 12 V |
Vehicle Equipment | for vehicles with back doors |
Paired article numbers | 2SK 008 579-111 |
Colour | White |
Bulb Type | P21/4W, P21W |
Light Function | with indicator, with stop light, with rear fog light, with reverse light, with taillight |
Light Design | Bulb Technology |
Number of light functions | 5 |
Lens Colour | Yellow, Crystal clear, Red |
Registration Type | ECE approved |
Indicator colour lens | Yellow |
Type | Tail Light Assembly |
Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 3x Hella Bulb (8GA002073-121)
- 1x Hella Bulb (8GD004772-121)
Important compatibility info
Placement on Vehicle | Right |
Additional Information | with bulb holder |
Additional Information 2 | with bulbs |
Voltage | 12 V |
Vehicle Equipment | for vehicles with back doors |
Paired article numbers | 2SK 008 579-111 |
Colour | White |
Bulb Type | P21/4W, P21W |
Light Function | with indicator, with stop light, with rear fog light, with reverse light, with taillight |
Light Design | Bulb Technology |
Number of light functions | 5 |
Lens Colour | Yellow, Crystal clear, Red |
Registration Type | ECE approved |
Indicator colour lens | Yellow |
Type | Tail Light Assembly |
Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 3x Hella Bulb (8GA002073-121)
- 1x Hella Bulb (8GD004772-121)
Important compatibility info
Replaced by | 6PP358152-451 |
Number of Poles | 3 -pin connector |
Type | Sensor, intake manifold pressure |
Function | Sensor, intake manifold pressure |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Replaced by | 6PP358152-451 |
Number of Poles | 3 -pin connector |
Type | Sensor, intake manifold pressure |
Function | Sensor, intake manifold pressure |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Number of Poles | 3 -pin connector |
Mounting Type | Plugged |
Chemical Properties | Over-paintable |
Type | Sensor, park distance control |
Function | Sensor, park distance control |
Socket colour | black |
Shaft form | round |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Number of Poles | 3 -pin connector |
Mounting Type | Plugged |
Chemical Properties | Over-paintable |
Type | Sensor, park distance control |
Function | Sensor, park distance control |
Socket colour | black |
Shaft form | round |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Placement on Vehicle | Right, Lateral Mounting |
Additional Information 2 | with pipe |
Voltage | 12 V. 24 V |
Number of Poles | 2 -pin connector |
Plug Type ID | EasyConn |
Bulb Type | LED |
Light Function | with position light (LED), with taillight (LED), with side marker light (LED) |
Light Design | LED |
Connector Shape | Angled |
Cable Length | 500 mm |
Number of light functions | 3 |
Registration Type | ECE approved, ADR/GGVS approved |
Protection Type (IP Code) | IP6K9K |
Number of LEDs | 4 |
Type | Clearance Light |
Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
Number of Poles | 3 -pin connector |
for OE number | 03L 957 147 |
Sensor Type | Hall Sensor |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Injection System | Common Rail |
Housing Colour | Black |
Number of mounting bores | 1 |
Length | 330 mm |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
Number of Poles | 3 -pin connector |
for OE number | 03L 957 147 |
Sensor Type | Hall Sensor |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Injection System | Common Rail |
Housing Colour | Black |
Number of mounting bores | 1 |
Length | 330 mm |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023