Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | Oil sump with permanently integrated filter element |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Type | Oil Sump, automatic transmission |
| Function | Oil Sump, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Plug-in housing, automatic transmission (control unit) (101108)
- 1x Febi Plug-in housing, automatic transmission (control unit) (101968)
- 1x Febi Hydraulic Filter, automatic transmission (171617)
£57.11
Important compatibility info
| Seal Material | NBR (nitrile butadiene rubber) |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Additional Information | with gaskets/seals |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.10
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.08
Important compatibility info
| for OE number | 51813198 |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.07
Important compatibility info
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Thread Size | M16 x 1,5 |
| Bolt Hole Circle Diameter | 100 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Paired article numbers | 180785 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Left |
| Min. Length | 480 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.07
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Paired article numbers | 26802 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.07
Important compatibility info
| Placement on Vehicle | Left Front |
| Length | 330 mm |
| Additional Information | with cable pull |
| for OE number | 81.62350.6029 |
| Type | Switch, seat adjustment |
| Function | Switch, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.06
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 15564 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.05
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 540 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.05
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Cable Length | 1130 mm |
| Spanner Size | 22 |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Placement on Vehicle | after catalytic converter |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.05
Important compatibility info
| Length | 243 mm |
| Height | 63 mm |
| Width | 179 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M30 x 1,5 RHT |
| Cone Size | 38 mm |
| Length | 87 mm |
| Extra Description | ProKit |
| Additional Information | with crown nut and split pin |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.03
Important compatibility info
| Material | Aluminium |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.02
Important compatibility info
| Paired article numbers | 176007 |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Additionally required parts | Mounting Kit |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Additionally Required Parts | 22116858061 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.01
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Outer diameter | 260 mm |
| Thickness | 35 mm |
| Brake Disc Thickness | 12.7 mm |
| Minimum thickness | 11.1 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.00
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 107075 |
| Cable Length | 900 mm. 1200 mm |
| Number of circuits | 23 |
| Type | Cable Repair Kit, tailgate |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.00
Important compatibility info
| Brake caliper piston diameter | 45 mm |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 179253 |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.00
Important compatibility info
| Spanner Size | 22 |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Cable Length | 420 mm |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.00
Important compatibility info
| Material | Sheet Steel |
| External Thread Size | M12 x 1,25 |
| Cone Size 2 | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 185603 |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.00
Important compatibility info
| for OE number | 1 138 760 |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
Technical Information
The correct chain tensioner has to be ascertained by the vehicle manufacturer using the VIN and looking up the according service manual.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.99
Important compatibility info
| Spanner Size | 22 |
| External Thread Size | M18 x 1,5 |
| Cable Length | 580 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cable Tie (07024)
£56.99
Important compatibility info
| Placement on Vehicle | Upper, Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.99
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 58.3 mm |
| Brake Disc Thickness | 24 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| Internal Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Height | 103 mm |
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Paired article numbers | 102047 |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (176428)
- 1x Febi Rolling Bearing, suspension strut support mount (177290)
£56.96
Important compatibility info
| Outer diameter | 150 mm |
| Placement on Vehicle | Front Axle Right |
| Height | 103 mm |
| Material | Rubber/Metal |
| Paired article numbers | 104365 |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Internal Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (176429)
- 1x Febi Rolling Bearing, suspension strut support mount (177290)
£56.96
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Additional Information | with squeeze connector |
| Cable Length | 300 mm |
| Number of circuits | 34 |
| Type | Cable Repair Set, door |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| Type | Cable Pull, manual transmission |
| Inner length 2 | 885 mm |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 860 mm |
| Outer length 1 | 1180 mm |
| Outer length 2 | 1202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 61 mm |
| Outer diameter | 74 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| for OE number | 18011-RNA-A00 |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.95
Important compatibility info
| Placement on Vehicle | transmission sided |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.94
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 285 mm |
| Thickness | 92.9 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 145 mm |
| Centering Diameter | 120 mm |
| Surface | Coated |
| Mounting points diameter | 15 mm |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 280 W |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Additional Information 2 | with gear |
| Function | Oil Pump |
| Type | Oil Pump |
| for OE number | 15 01 062 49R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Material | Metal |
| Function | Belt Tensioner, V-ribbed belt |
| Width of castor bearing surface | 26 mm |
| for OE number | 059 903 133 BB |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| for OE number | 03G 906 088 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.92
Important compatibility info
| Additional Information 2 | with ball bearing |
| Inner diameter | 30 mm |
| Length | 165 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 145 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186476)
- 1x Febi Bearing, propshaft centre bearing (05362)
£56.92
Important compatibility info
| Rotor Style | Internally Vented |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Surface | Coated |
| Brake Disc Thickness | 28 mm |
| Thickness | 68.4 mm |
| Outer diameter | 300 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.91
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178254 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.91
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178253 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.91
Important compatibility info
| Number of Ribs | 5 |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (39784)
- 1x Febi Belt Tensioner, v-ribbed belt (100295)
£56.91
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.90
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 96 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.90
Important compatibility info
| Outer diameter | 57 mm |
| Width | 54 mm |
| Type | Alternator Freewheel Clutch |
| Inner diameter | 25 mm |
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 6 |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.90
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Placement on Vehicle | Front Axle |
| Length | 280 mm |
| Thickness | 41 mm |
| Inner diameter | 20 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.89
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 10 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.88
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| for OE number | 038 903 315 K |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.88
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40104 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts, with holder |
| Additional Information 2 | with bolts/screws, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (32561)
- 1x Febi Screw (32562)
- 1x Febi Screw (39865)
- 1x Febi Control/Trailing Arm, wheel suspension (37183)
£56.88
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26277 |
| Function | Control/Trailing Arm, wheel suspension |
| Replaces | 42663 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.88
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40103 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with holder, with rubber mounts |
| Additional Information 2 | with ball joint, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (32561)
- 1x Febi Screw (32562)
- 1x Febi Screw (39865)
- 1x Febi Control/Trailing Arm, wheel suspension (37182)
£56.88
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023