Proud to be a UK-based company
Contact us
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Paired article numbers | 181956 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.85
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Cable Length | 850 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.85
Important compatibility info
| Rod/Strut | Coupling Rod |
| Inner diameter | 14.2 mm |
| Material | Steel |
| Outer diameter | 18.5 mm |
| Length | 199 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.84
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 964 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.83
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | with studs |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.82
Important compatibility info
| Placement on Vehicle | Rear, Front Axle Right |
| Material | Steel |
| Additional Information 2 | with ball joint, with rubber mount |
| Steering arm type | Control Arm |
| Paired article numbers | 197540 |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.81
Important compatibility info
| Width | 20 mm |
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 45 mm |
| Outer diameter | 58 mm |
| Additional Information 2 | with ball bearing |
| Function | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.79
Important compatibility info
| Paired article numbers | 182114 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 24 |
| External Teeth, Diff.Side | 23 |
| Min. Length | 838 mm |
| Wheel Sided Joint Diameter | 71.9 mm |
| Transmission-side joint diameter | 70 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.78
Important compatibility info
| for OE number | 1261 652 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.76
Important compatibility info
| Replaces | 35579; 46132 |
| Operating Mode | Electric-pneumatic |
| Voltage | 24 V |
| Frequency Range | 400 Hz |
| Noise Level | 118 dB |
| Type | Trumpet Horn |
| Function | Trumpet Horn |
| Power Consumption | 30 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.74
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Paired article numbers | 32698 |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.74
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.73
Important compatibility info
| Function | Filter, crankcase ventilation |
| Length | 229 mm |
| Height | 46 mm |
| Width | 178.5 mm |
| Type | Filter, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.73
Important compatibility info
| Paired article numbers | 48107 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear, Lower, Front Axle Left |
| Material | Steel |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.72
Important compatibility info
| Additional Information 2 | with bearing |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right, Rear |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 48106 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.72
Important compatibility info
| Housing length | 245.5 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 174 mm |
| Eject Force | 345 N |
| Housing Diameter | 19 mm |
| Length | 447 mm |
| Placement on Vehicle | both sides |
| Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.72
Important compatibility info
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Outer diameter | 356 mm |
| Thickness | 62.4 mm |
| Brake Disc Thickness | 34 mm |
| Minimum thickness | 31.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.72
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Paired article numbers | 184089 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.70
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
| Number of Connectors / Ports | 4 |
| for OE number | 96423429 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.70
Important compatibility info
| Width | 200 mm |
| Length | 516 mm |
| Thickness | 11 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.69
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023