Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178188 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.92
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178189 |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.92
Important compatibility info
| Width | 22 mm |
| Outer diameter | 468 mm |
| Inner diameter | 420 mm |
| Number of Teeth | 154 |
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.91
Important compatibility info
| Additional Information 2 | with screw set |
| Additional Information | with nuts |
| Placement on Vehicle | Rear |
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.89
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with grease |
| Additional Information 2 | with screw |
| Min. Length | 751 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 83.1 mm |
| Transmission-side joint diameter | 93.4 mm |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 78 mm |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.89
Important compatibility info
| Outer diameter | 53 mm |
| Function | Joint, propshaft |
| Length | 135 mm |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.88
Important compatibility info
| Type | Brake Lining, drum brake |
| Width | 200 mm |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Brake Lining, drum brake |
| Number of pads | 8 |
| Inner Brake Drum Diameter | 410 mm |
| Number of Holes | 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.88
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 820 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.88
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 241 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 18 mm. 46 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 62.2 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.88
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 1000559 |
| Number of Connectors / Ports | 7 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.88
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 1000246 |
| Number of Connectors / Ports | 7 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.88
Important compatibility info
| Length | 430 mm |
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (27300)
- 1x Febi Screw Plug, oil sump (101250)
£55.88
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 58 mm |
| Thickness | 20 mm |
| Inner diameter | 30 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Intermediate Bearing, drive shaft |
| Type | Intermediate Bearing, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.87
Important compatibility info
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Kingpin (01543)
- 4x Febi Bush, kingpin (01544)
- 4x Febi Lock Ring, steering knuckle (01551)
- 4x Febi Seal Ring, steering knuckle (01552)
£55.87
Important compatibility info
| Number of Connectors / Ports | 2. 3 |
| for OE number | 2 131 819 |
| Type | Sensor, boost pressure |
| Function | Sensor, boost pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.87
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 184458 |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.87
Important compatibility info
| Manufacturer | Mekra Lang |
| Placement on Vehicle | both sides |
| Length | 177 mm |
| Width | 190 mm |
| Material | ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) |
| Thickness | 14 mm |
| Voltage | 12 V |
| Outer/Inner Mirror | Heatable, Convex |
| Section | Lower Section |
| Type | Mirror Glass, exterior mirror |
| Camber Radius | 300 mm |
| Function | Mirror Glass, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.87
Important compatibility info
| Function | Suspension, propshaft |
| Inner diameter | 70 mm |
| Length | 90 mm |
| Width | 67 mm |
| Outer diameter | 98 mm |
| Thickness | 81 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.86
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 394 mm |
| Min. Length | 351 mm |
| Pipe Diameter | 41 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.86
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 4 |
| Type | Sensor, headlight levelling |
| Function | Sensor, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023