Important compatibility info
Placement on Vehicle | transmission sided |
Weight | 0.36 kg |
Function | Coolant Flange |
Additional Information | with gasket/seal |
Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
Thread Size | M22x,15 |
External Teeth, Wheel Side | 26 |
Weight | 6.142 kg |
External Teeth, Diff.Side | 25 |
Min. Length | 896 mm |
Wheel Sided Joint Diameter | 79.4 mm |
Transmission-side joint diameter | 75.1 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Tank, compressed-air system |
Weight | 17.2 kg |
Material | Steel |
Outer diameter | 396 mm |
Length | 750 mm |
Capacity | 80 l |
Operating Pressure | 10 bar |
Number of Connectors / Ports | 4 |
Internal Thread Size | M22 x 1,5 |
Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Camshaft |
for OE number | 1 386 533 |
Weight | 1.789 kg |
Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 726 mm |
Number of Connectors / Ports | 2 |
Weight | 0.043 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Additional Information 2 | with ball bearing |
Weight | 1.175 kg |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (185447)
- 1x Febi Rolling Bearing, suspension strut support mount (183629)
Important compatibility info
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Cable Length | 814 mm |
Weight | 0.063 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.078 kg |
Outer diameter | 107 mm |
Inner diameter | 73.5 mm |
Rotation Direction | Anticlockwise rotation |
Function | Shaft Seal, crankshaft |
Placement on Vehicle | transmission sided |
Height | 8 mm |
Material | FPM (fluoride rubber) |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cap, fuel tank |
Weight | 0.18 kg |
Material | Plastic |
Type | Cap, fuel tank |
Lock System | without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with dryer |
Weight | 1.79 kg |
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Length | 545 mm |
Core Width | 361 mm |
Core Depth | 16 mm |
Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023