Important compatibility info
| Water pump impeller material | Metal |
| Number of Wings | 7 |
| Additional Information | with gaskets/seals |
| Number of Teeth | 19 |
| Function | Water Pump, engine cooling |
| Height | 64 mm |
| Impeller Diameter | 71.8 mm |
| Water Pump Pulley Diameter | 56 mm |
| Replaces | BWP2064; BWP2328 |
| Type | Water Pump, engine cooling |
Important compatibility info
| Type | Joint Kit, drive shaft |
| Additional Information 2 | with groove |
| Seal Diameter | 53 mm |
| Thread Size | M14X1.5 |
| External Teeth, Wheel Side | 33 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 27 |
| Number of Teeth, ABS ring | 45 |
| Length | 93 mm |
Important compatibility info
| Function | Slave Cylinder, clutch |
| Inner diameter | 22.22 mm |
| Material | Cast Iron |
| Type | Slave Cylinder, clutch |
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with right-hand thread, with external thread |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right, Front Axle Left, inner |
| Type | Tie Rod End |
Important compatibility info
| Inner diameter 2 | 79 mm |
| Inner diameter 1 | 28 mm |
| Material | Thermoplast |
| Length | 113 mm |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Extra Description | Trilobe |
Important compatibility info
| Function | Brake Shoe Set, parking brake |
| Width | 26 mm |
| Inner Brake Drum Diameter | 190 mm |
| Replaced by | BBS6531 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Brake Shoe Set, parking brake |
Important compatibility info
| Type | Oil sump |
| Material | Steel |
| Function | Oil sump |
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 2 | 82 mm |
| Colour | Black |
| Inner diameter 1 | 82 mm |
| Function | Intake Hose, air filter |
| Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
Important compatibility info
| Material | Polychloroprene (Neoprene) |
| Function | Charge Air Hose |
| Colour | Black |
| Inner diameter 2 | 61 mm |
| Inner diameter 1 | 54 mm |
| Type | Charge Air Hose |
Important compatibility info
| Outer diameter | 97 mm |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Inner diameter | 10 mm |
| Paired article numbers | FSM5474 |
| Type | Suspension Strut Support Mount |
| Height | 35 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









