Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.377 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 162 |
| Function | Timing Chain |
| for OE number | 24321-03101 |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.34
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Width | 75.5 mm |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.9 mm |
| Inspection Tag | ECE R90 Approved |
| Weight | 2.947 kg |
| Placement on Vehicle | Front Axle |
| Length | 198.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.34
Important compatibility info
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 1670 mm. 100 mm |
| Weight | 0.185 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.34
Important compatibility info
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21621 |
| Placement on Vehicle | Front Axle Left, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 3.9801 kg |
| Additional Information 2 | with rubber mount |
| Cone Size 2 | 20 mm |
| Cone Size | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21517)
£53.33
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Centre |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 0.879 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.33
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 222 W |
| Weight | 1.5 kg |
| for OE number | 27 21 066 00R |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.33
Important compatibility info
| Weight | 1.42 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
| for OE number | 1813.94 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.32
Important compatibility info
| Weight | 6.4 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 71.5 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| for OE number | 58411-2P000 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.32
Important compatibility info
| Weight | 1.20 kg |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Replaces | 19466; 28150; 29639 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.31
Important compatibility info
| Function | Cover, fuel filter |
| Tightening Torque | 40 Nm |
| Type | Cover, fuel filter |
| Bolt Head/Nut Design | Male Hex |
| Weight | 0.33 kg |
| Spanner Size | 32 |
| Outer diameter | 133.5 mm |
| Height | 91.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.31
Important compatibility info
| Weight | 0.22 kg |
| Placement on Vehicle | transmission sided |
| Material | PTFE (polytetrafluoroethylene) |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.29
Important compatibility info
| Length | 600 mm |
| Thickness | 20 mm |
| Function | Gasket, oil sump |
| Width | 350 mm |
| Material | ACM (Polyacrylate) |
| Type | Gasket, oil sump |
| Weight | 0.386 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.29
Important compatibility info
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Weight | 0.650 kg |
| Length | 1685 mm |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.28
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178203 |
| Weight | 1.67 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.28
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.127 kg |
| Cable Length | 900 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.28
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178202 |
| Weight | 1.67 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.28
Important compatibility info
| Thickness | 64 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13.5 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 73 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Weight | 5.9 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.28
Important compatibility info
| Number of Connectors / Ports | 5 |
| for OE number | 93179927 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.178 kg |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.27
Important compatibility info
| Wet Boiling Point | 180 °C |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 64 |
| Weight | 0.36 kg |
| Timing Chain Size | G53HP |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25357)
- 1x Febi Chain Tensioner, oil pump drive (25417)
£53.27
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Weight | 0.118 kg |
| Extra Description | febi Plus |
| for OE number | 15330-47010 |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.27
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Weight | 2.244 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 50 mm |
| Outer diameter | 140 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.26
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 308 mm |
| Thickness | 61 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Weight | 6.0 kg |
| Number of mounting bores | 1 |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.26
Important compatibility info
| Weight | 2.162 kg |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, external planetary gearbox |
| Function | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (06643)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
£53.25
Important compatibility info
| Weight | 0.742 kg |
| Function | Master Cylinder, clutch |
| Bore Diameter | 29 mm |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Housing length | 206 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 6 mm |
| Mounting points diameter | 16.5 mm |
| Stroke | 135 mm |
| Eject Force | 288 N |
| Housing Diameter | 16 mm |
| Weight | 0.2 kg |
| Length | 363 mm |
| Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.454 kg |
| Width | 39.3 mm |
| Outer diameter | 55.7 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left |
| Weight | 2.639 kg |
| External Teeth, Diff.Side | 29 |
| Int. teeth, diff.side, conn.to transm. | 35 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Drive Shaft |
| Transmission-side joint diameter | 74.3 mm |
| Type | Drive Shaft |
| Min. Length | 615 mm |
| External Teeth, Diff.Side | 22 |
| Weight | 5.308 kg |
| External Teeth, Wheel Side | 21 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Wheel Sided Joint Diameter | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.63 kg |
| Type | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Bore Diameter | 24 mm |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Inner diameter | 190 mm |
| Height | 559 mm |
| Outer diameter | 282 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Outer length 1 | 1312 mm |
| Inner length 1 | 960 mm |
| Placement on Vehicle | Right |
| Paired article numbers | 179938 |
| Weight | 0.446 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 1.66 kg |
| Outer diameter | 148 mm |
| Thickness | 30 mm |
| Inner diameter | 29 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 0.241 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 100 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 1.690 kg |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Width of castor bearing surface | 38 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.380 kg |
| Type | Repair Kit, shift cylinder |
| Function | Repair Kit, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Stop Light Switch |
| Additional Information 2 | with nut |
| Weight | 0.071 kg |
| External Thread Size | M22 x 1 |
| Operating Mode | Pneumatic |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 5.144 kg |
| Min. Length | 632 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 74 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Length | 63 mm |
| Outer diameter | 25 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.092 kg |
| Function | Solenoid Valve |
| Type | Solenoid Valve |
| Additional Information 2 | with plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Number of Coils | 6.5 |
| Function | Suspension Spring |
| Outer diameter | 162 mm |
| Length | 343 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 4.05 kg |
| Wire Diameter | 16 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Right |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 520 mm |
| Outer length 1 | 797 mm |
| Function | Cable Pull, manual transmission |
| Weight | 0.394 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.223 kg |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 0.95 kg |
| Additional Information | with gasket/seal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 3.84 kg |
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
| Operating Mode | Manual |
| Paired article numbers | 174024 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.070 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Cable Length | 520 mm |
| Placement on Vehicle | after catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Thickness | 1.75 mm |
| Inner diameter | 91 mm |
| Weight | 0.244 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Type | Drive Shaft |
| Weight | 5.780 kg |
| External Teeth, Wheel Side | 36 |
| Bolt Hole Circle Diameter | 86 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 100 mm |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Number of mounting bores | 6 |
| Min. Length | 558 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.365 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 39 mm |
| Outer diameter | 84 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Weight | 1.154 kg |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 154 mm |
| Outer diameter | 27 mm |
| Function | Repair Kit, kingpin |
| Weight | 1.062 kg |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06320)
- 1x Febi Bush, steering knuckle (09689)
- 1x Febi Bush, steering knuckle (02172)
- 3x Febi Bush, steering knuckle (02171)
- 1x Febi Seal Ring, steering knuckle (02167)
- 2x Febi Lock Ring, steering knuckle (02173)
- 1x Febi Kingpin (01432)
- 2x Febi Circlip (02166)
- 2x Febi Seal Ring, steering knuckle (02174)
- 1x Febi Nut (01030)
- 1x Febi Springwasher (07583)
- 1x Febi Grease Nipple (01094)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01095)
£53.25
Important compatibility info
| Length | 364 mm |
| Additional Information | Change interval/date according to gas spring imprint |
| Housing Diameter | 18 mm |
| Weight | 0.3 kg |
| Function | Gas Spring, bonnet |
| Housing length | 203 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 130 mm |
| Eject Force | 150 N |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023