Important compatibility info
Material | Rubber/Metal |
Weight | 0.80 kg |
Placement on Vehicle | Rear Axle |
Width | 129 mm |
Inner diameter | 14 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 75 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 74 22 203 109 SK3 |
Function | Sealing Set, air compressor |
Weight | 0.5 kg |
Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with wipe interval function |
Type | Steering Column Switch / Switch, windscreen wiper interval / Wiper Switch |
Function | Steering Column Switch / Switch, windscreen wiper interval / Wiper Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.083 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1225 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.31 kg |
Placement on Vehicle | Lower Front Axle, Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40372 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21513)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
Important compatibility info
Weight | 0.8 kg |
Placement on Vehicle | Front Axle Left, inner |
Length | 176 mm |
Thickness | 90 mm |
Spanner Size | 22 |
Paired article numbers | 41378 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
External Thread Size | M12 x 1,5, M20 x 1 |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain |
Function | Timing Chain |
Weight | 0.383 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.792 kg |
Internal Thread Size | M12 x 1,5 |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm. 45 mm |
Number of Holes | 6 |
Number of Teeth | 30 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 148 mm |
Filter type | Filter Insert |
Function | Air Filter |
Height | 513 mm |
Outer diameter | 282 mm |
Weight | 2.94 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.380 kg |
Type | Repair Kit, shift cylinder |
Function | Repair Kit, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 55 mm |
Length | 132 mm |
Function | Oil Cooler, engine oil |
Weight | 0.6 kg |
Material | Aluminium |
Width | 114 mm |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Lining, drum brake |
Number of pads | 8 |
Number of Holes | 8 |
Weight | 9.21 kg |
Inner Brake Drum Diameter | 420 mm |
Type | Brake Lining, drum brake |
Placement on Vehicle | Rear Axle |
Width | 180 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Exhaust Manifold |
Cable Length | 420 mm |
Weight | 0.049 kg |
Type | Sensor, exhaust gas temperature |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 206 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 6 mm |
Mounting points diameter | 16.5 mm |
Stroke | 135 mm |
Eject Force | 288 N |
Housing Diameter | 16 mm |
Weight | 0.2 kg |
Length | 363 mm |
Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 40371 |
Weight | 1.31 kg |
Placement on Vehicle | Lower Front Axle, Right Rear |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21514)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
Important compatibility info
Weight | 0.172 kg |
Mounting points diameter | 6.5 mm |
Type | Solenoid Valve, shift cylinder |
Internal Thread Size | M10 x 1 |
Function | Solenoid Valve, shift cylinder |
Length | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Additional Information 2 | without lid |
Number of Connectors / Ports | 2 |
Weight | 0.50 kg |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Weight | 5.780 kg |
External Teeth, Wheel Side | 36 |
Bolt Hole Circle Diameter | 86 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 100 mm |
Function | Drive Shaft |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Number of mounting bores | 6 |
Min. Length | 558 mm |
Placement on Vehicle | Front Axle Left |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, exhaust gas temperature |
Weight | 0.049 kg |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Lambda Sensor | Heated |
Cable Length | 215 mm |
Number of Connectors / Ports | 2 |
Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.3 kg |
Additional Information | with nuts |
External Thread Size | M24 x 1,5 |
Placement on Vehicle | Rear Axle |
Length | 435 mm |
Rod/Strut | Coupling Rod |
Cone Size | 32.2 mm |
Adjustable | not adjustable |
Pipe Diameter | 36 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.062 kg |
Type | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Cable Length | 728 mm |
Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
External Teeth, Diff.Side | 34 |
Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.1 kg |
Placement on Vehicle | Rear Axle |
Width | 59 mm |
Outer diameter | 56 mm |
Inner diameter | 43 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
Additional Information | with quick coupling |
Material | Rubber |
Inner diameter 1 | 44 mm |
Inner diameter 2 | 84 mm |
Type | Intake Hose, air filter |
Function | Intake Hose, air filter |
Extra Description | febi Plus |
Hose Length | 260 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Weight | 1.690 kg |
Outer diameter | 74 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Width of castor bearing surface | 38 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.248 kg |
External Thread Size | M8 x 1,25 |
Length | 110 mm |
Number of Connectors / Ports | 3 |
Mounting points diameter | 8.6 mm |
Function | Sensor, pneumatic suspension level |
Type | Sensor, pneumatic suspension level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.365 kg |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 879 mm |
Outer diameter | 36 mm |
Rod/Strut | Push Rod |
Cone Size | 28.6 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Weight | 5.685 kg |
Internal Thread Size | M28 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Operating Mode | Electric |
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Weight | 0.25 kg |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Type | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Paired article numbers | 174611 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 367 mm |
Placement on Vehicle | Front Axle |
Weight | 3.65 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.258 kg |
Outer diameter | 33 mm |
Opening Temperature | 95 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with sensor |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 120 |
Timing Chain Size | G53HR |
Function | Timing Chain |
Type | Timing Chain |
Weight | 0.327 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.260 kg |
Type | Control, swirl covers (induction pipe) |
Operating Mode | Electric-pneumatic |
Function | Control, swirl covers (induction pipe) |
Valve type | Switch Valve |
Extra Description | febi Plus |
Number of Connectors / Ports | 2 |
Fault Code(s) | P2008 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.9 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41806 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Lower Front Axle, Right |
Paired article numbers | 29651 |
Weight | 4.820 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with rubber mounts |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PA (polyamide) |
Weight | 1.135 kg |
Additional Information | with coolant level sensor |
Colour | Black |
Number of Connectors / Ports | 2 |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 158 mm |
Weight | 3.1 kg |
Placement on Vehicle | Rear Axle |
Length | 263 mm |
Spring Design | Coil spring with inconstant wire diameter |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with tensioner element |
Number of Ribs | 5 |
Length | 491 mm |
Weight | 0.590 kg |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (176318)
- 1x Febi Belt Tensioner, v-ribbed belt (40327)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Cone Size 2 | 16.6 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 14 mm |
Weight | 4.493 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 185167 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 29652 |
Placement on Vehicle | Lower Front Axle, Left |
Material | Sheet Steel |
Weight | 4.820 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Material | Plastic |
Weight | 0.59 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Number of Connectors / Ports | 2 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 37 mm |
Function | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Bolt Hole Circle Diameter | 110 mm |
Outer diameter | 78 mm. 138 mm |
Inner diameter | 29 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 2.90 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.308 kg |
Placement on Vehicle | Front Axle Right, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 44228 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 4 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Weight | 1.641 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.02 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 37571 |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 44229 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.308 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.84 kg |
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Manual |
Paired article numbers | 174024 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 53 mm |
Function | Joint, propshaft |
Weight | 3.131 kg |
Length | 135 mm |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 276.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 17.8 mm |
Stroke | 194 mm |
Eject Force | 355 N |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Length | 504 mm |
Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Core Length | 286 mm |
Core Depth | 26 mm |
Weight | 0.7 kg |
Function | Heat Exchanger, interior heating |
Type | Heat Exchanger, interior heating |
Core Width | 134 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023