Important compatibility info
| Type | Window Regulator |
| Function | Window Regulator |
| Paired article numbers | 176281 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 471 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 74 22 203 109 SK3 |
| Function | Sealing Set, air compressor |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Diff.Side | 22 |
| External Teeth, Wheel Side | 22 |
| Function | Drive Shaft |
| Min. Length | 913 mm |
| ABS Ring Diameter | 78 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 83 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Paired article numbers | 183291 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Lambda Sensor | Heated |
| Cable Length | 215 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 89 mm |
| Inner diameter | 51 mm |
| Placement on Vehicle | Front Axle |
| Width | 55 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 37 mm |
| Outer diameter | 80 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 48 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 86 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Wet Boiling Point | 180 °C |
| Timing Chain Size | Z46VC, Z46 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket/Gear, oil pump (33932)
- 1x Febi Chain Tensioner, oil pump drive (33934)
- 1x Febi Chain, oil pump drive (33931)
Important compatibility info
| Additionally Required Parts | BMW 31 30 6 851 799 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Inner diameter | 14 mm |
| Additionally required parts | Screw |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length | 1685 mm |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Brake caliper piston diameter | 35 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 181154 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 329 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 10 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | without lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 276 mm |
| Outer diameter | 104 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 000 830 93 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Material | PP (Polypropylene) |
| Outer diameter | 81.5 mm |
| Inner diameter | 78.5 mm |
| Type | Intake Hose, air filter |
| Hose Length | 255 mm |
| Wall Thickness | 3 mm |
| Function | Intake Hose, air filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Additional Information 2 | with studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 350 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Rated Power | 250 W |
| Number of Wings | 7 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belts | with rounded tooth profile |
| Width | 17 mm |
| Number of Teeth | 111 |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 16 06 369 S1 |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14115)
- 1x Febi Water Pump, engine cooling (01262)
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| for OE number | 77 01 207 537 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22283)
- 1x Febi Suspension Strut Support Mount (29587)
- 1x Febi Suspension Strut Support Mount (32241)
- 1x Febi Rolling Bearing, suspension strut support mount (22305)
Important compatibility info
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 15376 |
| Placement on Vehicle | Right Front |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
| Length | 1185 mm |
| Type | Gasket, cylinder head cover |
| for OE number | 20538793 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| for OE number | 55566086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 39.3 mm |
| Outer diameter | 55.7 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Aluminium |
| Inspection Tag | EMC, ADR |
| Extra Description | ProKit |
| Height | 134 mm |
| Width | 105 mm |
| Rated Power | 18 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 280 mm |
| Depth | 52 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 36 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10, R23 |
| Lumen | 1440 lm |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Worklight |
| Type | Worklight |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | GJ6A-39-040B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear, inner, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 74 mm |
| Thickness | 80 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Additional Information | with adjuster |
| for OE number | YR00237080 |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























