Important compatibility info
Material | Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.705 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (46193)
- 1x Febi Nut (21557)
Important compatibility info
Weight | 2.340 kg |
Function | Track Rod Set |
Type | Track Rod Set |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29623)
- 1x Febi Tie Rod End (29624)
- 2x Febi Inner Tie Rod (27725)
- 2x Febi Bellow Kit, steering (29650)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 21 |
Weight | 4.402 kg |
Min. Length | 629 mm |
ABS Ring Diameter | 85 mm |
Wheel Sided Joint Diameter | 93.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.308 kg |
Outer diameter | 80 mm |
Function | Cap, fuel tank |
Lock System | with two keys, with lock |
Additional Information | with gasket/seal |
Lockable | Lockable |
Extra Description | febi Plus |
Type | Cap, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 0.95 kg |
Additional Information | with gasket/seal |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Function | Gasket, cylinder head cover |
Length | 1185 mm |
Weight | 0.356 kg |
Type | Gasket, cylinder head cover |
for OE number | 20538793 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.38 kg |
Opening Temperature | 95 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Weight | 2.23 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 41766 |
Material | Cast Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Replaces | 41782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 39 mm |
Outer diameter | 84 mm |
Inner diameter | 45 mm |
Bearing Type | Angular Ball Bearing |
Weight | 1.154 kg |
Function | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Operating Mode | Automatic |
Housing material | Aluminium |
Weight | 1.660 kg |
Outer diameter | 74 mm |
Width of castor bearing surface | 38 mm |
Replaces | 27116 |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Repair Kit, tailgate |
Additional Information | with squeeze connector |
Additional Information 2 | with bellow |
Cable Length | 300 mm |
Number of circuits | 12 |
Weight | 0.110 kg |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 74 22 203 109 SK3 |
Function | Sealing Set, air compressor |
Weight | 0.5 kg |
Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 15.3 mm |
Length | 322 mm |
Outer diameter | 115 mm |
Weight | 3.1 kg |
Function | Suspension Spring |
Number of Coils | 7.3 |
Type | Suspension Spring |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
External Teeth, Diff.Side | 34 |
Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Weight | 0.241 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 100 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Type | Cable Pull, manual transmission |
Inner length 1 | 520 mm |
Outer length 1 | 797 mm |
Function | Cable Pull, manual transmission |
Weight | 0.394 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Outer diameter | 22 mm |
Steering arm type | Control Arm |
Paired article numbers | 21198 |
Weight | 1.74 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21194)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 154 mm |
Outer diameter | 27 mm |
Function | Repair Kit, kingpin |
Weight | 1.062 kg |
Type | Repair Kit, kingpin |
Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06320)
- 1x Febi Bush, steering knuckle (09689)
- 1x Febi Bush, steering knuckle (02172)
- 3x Febi Bush, steering knuckle (02171)
- 1x Febi Seal Ring, steering knuckle (02167)
- 2x Febi Lock Ring, steering knuckle (02173)
- 1x Febi Kingpin (01432)
- 2x Febi Circlip (02166)
- 2x Febi Seal Ring, steering knuckle (02174)
- 1x Febi Nut (01030)
- 1x Febi Springwasher (07583)
- 1x Febi Grease Nipple (01094)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01095)
Important compatibility info
Opening Temperature | 92 °C |
Type | Thermostat, coolant |
Housing Type | with housing |
Function | Thermostat, coolant |
Weight | 0.263 kg |
Additional Information | with temperature sensor, with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.66 kg |
Outer diameter | 148 mm |
Thickness | 30 mm |
Inner diameter | 29 mm |
Number of Ribs | 6 |
Parameter | 7PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.518 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 296 mm |
Thickness | 76 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 79 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | before exhaust turbocharger |
Function | Sensor, exhaust gas temperature |
Cable Length | 536 mm |
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Weight | 0.07 kg |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Weight | 0.496 kg |
Function | Cable Pull, manual transmission |
Outer length 1 | 1262 mm |
Inner length 1 | 893 mm |
Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 34656 |
Weight | 0.988 kg |
Additional Information | with fastening/mounting material |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12378)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 351 mm |
Outer diameter | 178 mm |
Function | Suspension Spring |
Number of Coils | 5.3 |
Weight | 3.83 kg |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.274 kg |
Bore Diameter | 29 mm |
Fill Medium | Brake Fluid |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 276.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 17.8 mm |
Stroke | 194 mm |
Eject Force | 355 N |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Length | 504 mm |
Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 2.20 kg |
Rod/Strut | Coupling Rod |
Paired article numbers | 172296 |
External Thread Size | M20 x 1,5 |
Thickness | 105 mm |
Material | Steel |
Length | 300 mm |
Placement on Vehicle | Rear Axle Right |
Additional Information | with nuts |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cable Pull, manual transmission |
Weight | 0.504 kg |
Function | Cable Pull, manual transmission |
Placement on Vehicle | Left |
Inner length 1 | 1154 mm |
Outer length 1 | 1170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.063 kg |
Placement on Vehicle | Front Axle Left, Rear |
Material | Aluminium |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 171631 |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023