Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 172296 |
| External Thread Size | M20 x 1,5 |
| Thickness | 105 mm |
| Material | Steel |
| Length | 300 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with nuts |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.47
Important compatibility info
| Thickness/Strength 1 | 17.4 mm |
| Type | Brake Pad Set, disc brake |
| Length | 157.7 mm |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Width | 57.2 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.46
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, throttle position |
| Type | Sensor, throttle position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.46
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 570 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.46
Important compatibility info
| Length | 143 mm |
| Outer diameter | 75 mm |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Seal Diameter | 49 mm |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.44
Important compatibility info
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Function | Door Lock |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 7 |
| Placement on Vehicle | Right Front |
| Paired article numbers | 180685 |
| Type | Door Lock |
| Lock System | with double sealing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.42
Important compatibility info
| Function | Door Lock |
| Extra Description | febi Plus |
| Placement on Vehicle | Left Front |
| Additional Information | with adjuster |
| Type | Door Lock |
| Operating Mode | Electric |
| Paired article numbers | 180684 |
| Lock System | with double sealing |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.42
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 65.6 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.41
Important compatibility info
| Inner diameter | 25.4 mm |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Additional Information | with nuts |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.41
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 193251 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.41
Important compatibility info
| Combi Switch Function | with wipe interval function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.40
Important compatibility info
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Track rollers material | Plastic |
| Width of castor bearing surface | 25 mm |
| Operating Mode | Mechanical |
| Function | V-Ribbed Belt Set |
| Outer diameter | 65 mm |
| Number of Ribs | 6 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38432)
- 1x Febi Belt Tensioner, v-ribbed belt (33136)
£51.40
Important compatibility info
| Steering arm type | Control Arm |
| External Thread Size | M12 x 1,25 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 180937 |
| Cone Size | 16 mm |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.38
Important compatibility info
| Function | Electric Motor, window regulator |
| Current Strength | 20 A |
| Paired article numbers | 35603 |
| Thickness | 57 mm |
| Voltage | 24 V |
| Placement on Vehicle | Right |
| Length | 191 mm |
| Width | 105 mm |
| Type | Electric Motor, window regulator |
| Number of Teeth | 10. 67 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.37
Important compatibility info
| Number of Teeth | 10. 67 |
| Placement on Vehicle | Left |
| Length | 191 mm |
| Width | 105 mm |
| Thickness | 57 mm |
| Voltage | 24 V |
| Paired article numbers | 35604 |
| Current Strength | 20 A |
| Type | Electric Motor, window regulator |
| Function | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.37
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 1K0 199 262 CN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.37
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Length | 322 mm |
| Outer diameter | 98 mm |
| Number of Teeth | 26 |
| Screw length below head | 270 mm |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 181576 |
| Placement on Vehicle | Left |
| Function | Brake Shaft, drum brake |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.36
Important compatibility info
| Outer diameter | 124 mm |
| Inner diameter | 110 mm |
| Number of Teeth, ABS ring | 80 |
| Function | Sensor Ring, ABS |
| Placement on Vehicle | Rear Axle |
| Type | Sensor Ring, ABS |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.35
Important compatibility info
| Function | Deflection/Guide Pulley, V-ribbed belt |
| Mounting points diameter | 17 mm |
| Material | Metal |
| Type | Deflection/Guide Pulley, V-ribbed belt |
| Inner diameter | 10 mm |
| Width of castor bearing surface | 18 mm |
| Outer diameter | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.35
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 220 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.35
Important compatibility info
| Material | Aluminium, Rubber |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
| External Thread Size | M12 x 1,5 |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.35
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1J0 199 262 BK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.34
Important compatibility info
| Function | Tensioner, timing chain |
| Spanner Size | 17 |
| Length | 90 mm |
| Outer diameter | 27 mm |
| Type | Tensioner, timing chain |
| for OE number | 270 052 10 00 S1 |
| Additional Information | with fastening/mounting material |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, timing chain tensioner (45367)
- 1x Febi Tensioner, timing chain (44737)
£51.34
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| for OE number | 55566086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.34
Important compatibility info
| Number of Connectors / Ports | 2 |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 290 mm |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.34
Important compatibility info
| Width | 22 mm |
| Number of Teeth | 117 |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| for OE number | 1 004 297 S3 |
| Additional Information 2 | with bolts/screws |
| Units / Pulleys | incl. tensioner pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10945)
- 1x Febi Tensioner Pulley, timing belt (29952)
- 1x Febi Pulley Bolt (40756)
£51.33
Important compatibility info
| Length | 260 mm |
| Width | 100 mm |
| Thickness | 190 mm |
| Inner diameter | 70 mm |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.33
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 29931 |
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 29932 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 57.5 mm |
| Brake Disc Thickness | 16 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 541 200 15 70 |
| Width of castor bearing surface | 34 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Placement on Vehicle | Rear, Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 1300 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Spanner Size | 22 |
| for OE number | 6U0 906 265 B |
| Cable Length | 580 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 1080 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 30866 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.31
Important compatibility info
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 30867 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.31
Important compatibility info
| Spanner Size | 22 |
| for OE number | 023 906 265 D |
| Cable Length | 720 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.31
Important compatibility info
| Cable Length | 460 mm |
| Number of circuits | 4 |
| Spanner Size | 22 |
| for OE number | 82004-61432 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.31
Important compatibility info
| Placement on Vehicle | Right |
| Length | 151 mm |
| Width | 160 mm |
| Thickness | 124.4 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1807 GG |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.30
Important compatibility info
| Light Function | with licence plate light (LED) |
| Depth | 58 mm |
| Voltage to | 24 V |
| Height | 146 mm |
| Width | 632 mm |
| Cable Length | 500 mm |
| Protection Type (IP Code) | IP67 |
| Type | Licence Plate Holder |
| Fulfils ECE norm | R4 |
| Function | Licence Plate Holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.30
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| for OE number | 13 26 548 61R |
| Colour | Black |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.29
Important compatibility info
| Outer diameter | 65 mm |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 31281 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (28582)
- 1x Febi Nut (24795)
£51.28
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.28
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 4F0 199 382 BK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.28
Important compatibility info
| Placement on Vehicle | Front Axle Left, inner |
| Length | 176 mm |
| Thickness | 90 mm |
| Spanner Size | 22 |
| Paired article numbers | 41378 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5, M20 x 1 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.28
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.28
Important compatibility info
| Paired article numbers | 181173 |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.28
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 2 |
| Cable Length | 660 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.28
Important compatibility info
| Number of Connectors / Ports | 2 |
| Opening Temperature | 95 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.28
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023