Important compatibility info
Length | 1220 mm |
Outer diameter | 8.5 mm |
Inner diameter | 3.2 mm |
Pressure | 362 bar |
Function | Hose Line, driver cab tilting device |
Weight | 1.25 kg |
External Thread Size | M12 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 19 mm |
Paired article numbers | 37204 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 3.288 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (09529)
- 1x Febi Ball Joint (02942)
- 1x Febi Securing Plate, ball joint (07862)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 647 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.041 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.906 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (36562)
- 1x Febi Oil Filter (37257)
- 1x Febi Air Filter (30992)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (17263)
- 4x Febi Spark Plug (13536)
Important compatibility info
Weight | 4.36 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Additional Information 2 | without ball joint |
Steering arm type | Control Arm |
Paired article numbers | 174163 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Number of Teeth | 31 |
Weight | 0.9 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.875 kg |
Paired article numbers | 177296 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 402 mm |
Paired article numbers | 45518 |
Placement on Vehicle | Rear Axle Left |
Outer diameter | 110 mm |
Weight | 5.6 kg |
Function | Brake Shaft, drum brake |
Number of Teeth | 10 |
Type | Brake Shaft, drum brake |
Internal Thread Size | M12 x 1,5 |
Length | 456 mm |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Weight | 2.8 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 150 mm |
Thickness | 121 mm |
Additional Information 2 | with crown nut |
Rod/Strut | Coupling Rod |
Pipe Diameter | 29 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 80.3 mm |
Outer diameter | 314.4 mm |
Thickness | 105 mm |
Inner diameter | 280 mm |
Bolt Hole Circle Diameter | 160 mm |
Centering Diameter | 118 mm |
Weight | 12.35 kg |
Max.skimmed drum measure | 282 mm |
Rim Hole Number | 5 -Hole |
Type | Brake Drum |
Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Weight | 0.666 kg |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (172165)
- 1x Febi Cap, coolant tank (40722)
Important compatibility info
Voltage | 24 V |
Weight | 0.1 kg |
Type | Repair Kit, air dryer |
Function | Repair Kit, air dryer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Weight | 0.149 kg |
Extra Description | febi Plus |
for OE number | 06E 109 257 L |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Core Depth | 42 mm |
Core Width | 370 mm |
Core Length | 188 mm |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Weight | 1.048 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Window Regulator |
Function | Window Regulator |
Weight | 1.58 kg |
Paired article numbers | 175586 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, oil pressure |
Weight | 0.106 kg |
Number of Connectors / Ports | 3 |
Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.81 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 284 mm |
Outer diameter | 62 mm |
Thickness | 90 mm |
Rod/Strut | Coupling Rod |
Cone Size | 23 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 130 mm |
Thickness | 14 mm |
Inner diameter | 90 mm |
Function | Bearing, manual transmission |
Weight | 0.55 kg |
Type | Bearing, manual transmission |
Additional Information 2 | with spacer disc |
Bearing Type | Rolling Bearing |
Bearing Code | 16017C3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 27 7 500 502 S2 |
Function | Chain Kit, oil pump drive |
Timing Chain Size | G53HP |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 52 |
Weight | 0.54 kg |
Type | Chain Kit, oil pump drive |
Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (32545)
- 1x Febi Rail, oil pump drive chain (32424)
- 1x Febi Sprocket, crankshaft (30458)
- 1x Febi Sprocket/Gear, oil pump (47980)
- 1x Febi Nut (47977)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 701 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.04 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5 kg |
Placement on Vehicle | Front Axle Right |
Length | 148 mm |
Thickness | 121 mm |
Paired article numbers | 39874 |
Rod/Strut | Coupling Rod |
Cone Size | 30 mm |
Pipe Diameter | 32 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Mounting points diameter | 14 mm |
Pipe Diameter | 40 mm. 46 mm |
Min. Length | 193 mm |
Max. Length | 239 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Weight | 1.0 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Diameter | 18 mm |
Stroke | 231 mm |
Eject Force | 420 N |
Type | Gas Spring, boot/cargo area |
Weight | 0.2 kg |
Placement on Vehicle | both sides |
Length | 604 mm |
Piston conrod diameter | 8 mm |
Mounting points diameter | 18 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 327 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 148 mm |
Paired article numbers | 39253 |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left |
Weight | 3.1 kg |
Cone Size | 30 mm |
Pipe Diameter | 32 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 143 mm |
Outer diameter | 75 mm |
Internal Teeth, wheel side | 28 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M18 x 1,5 |
Weight | 1.79 kg |
Seal Diameter | 49 mm |
External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 19384 |
Weight | 0.363 kg |
Width | 27 mm |
Outer diameter | 73 mm |
Inner diameter | 8 mm |
Function | Tensioner Pulley, timing belt |
Additional Information 2 | with screw |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 12 13 7 559 842 |
Number of Connectors / Ports | 3 |
Function | Ignition Coil |
Weight | 0.240 kg |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | before soot particulate filter |
Cable Length | 601 mm |
Number of Connectors / Ports | 2 |
Spanner Size | 17 |
Weight | 0.07 kg |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.59 kg |
Placement on Vehicle | Front Axle Right, Rear |
Material | Cast Steel |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 26137 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.07 kg |
Additional Information 2 | with screw |
Width | 28 mm |
Outer diameter | 142 mm |
Inner diameter | 30 mm |
Number of Ribs | 4 |
Parameter | 5PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27721)
- 1x Febi Pulley Bolt (33675)
Important compatibility info
Control Type | Rotary Operation |
Number of Connectors / Ports | 13 |
Type | Switch, headlight |
Function | Switch, headlight |
Extra Description | febi Plus |
Weight | 0.173 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Metal |
Weight | 0.7 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Steering arm type | Control Arm |
Paired article numbers | 41253 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18 mm |
Weight | 2.63 kg |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 30 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Outer diameter | 66 mm |
Width | 66 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 1.980 kg |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.185 kg |
Type | Oil Jet, piston underside cooling |
Function | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.39 kg |
Placement on Vehicle | Rear Axle |
Length | 435 mm |
Rod/Strut | Coupling Rod |
Cone Size | 28.6 mm |
Pipe Diameter | 36 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M22 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (27252)
- 2x Febi Nut, stabiliser bar (27249)
Important compatibility info
Placement on Vehicle | Front Axle Left, Rear |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 26138 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.59 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Placement on Vehicle | Rear |
Weight | 1.08 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Weight | 1.052 kg |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 03C 145 299 AF |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.71 kg |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Rear Axle |
Steering arm type | Control Arm, Trailing Arm |
Weight | 0.847 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, Left |
Bearing/Mounting Type | Hydro Mount |
Weight | 1.40 kg |
Function | Mounting, engine |
External Thread Size | M12 x 1,5 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Track rollers material | Plastic |
Operating Mode | Automatic |
Outer diameter | 76 mm |
Weight | 0.67 kg |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Tailgate Lock |
Type | Tailgate Lock |
Weight | 0.2 kg |
Additional Information | with adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.68 kg |
Additional Information | with nuts |
Additional Information 2 | with bolts/screws |
Function | Joint, propshaft |
Bolt Hole Circle Diameter | 78 mm |
Number of Holes | 6 |
Inner diameter | 38 mm |
Thickness | 32 mm |
Outer diameter | 110 mm |
Material | Rubber/Metal |
Extra Description | ProKit |
Type | Joint, propshaft |
for OE number | 26 11 1 227 869 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (05084)
- 1x Febi Assembly Kit, propshaft joint (43422)
Important compatibility info
Length | 1121 mm |
Width | 358 mm |
Material | Metal, NBR (nitrile butadiene rubber) |
Thickness | 0.4 mm |
Inner diameter | 9.4 mm |
Function | Gasket, oil sump |
Weight | 0.119 kg |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 0.856 kg |
Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Spanner Size | 17 |
Weight | 0.046 kg |
Placement on Vehicle | before soot particulate filter |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Cable Length | 500 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.109 kg |
Cable Length | 630 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Operating Mode | Electric |
Paired article numbers | 36218 |
Function | Window Regulator |
Weight | 0.246 kg |
Type | Window Regulator |
Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023