Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21440 |
| Weight | 1.623 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Outer Length | 418 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21219)
£49.08
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 1J0 199 555 BB |
| Weight | 1.900 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.08
Important compatibility info
| Function | Drive Shaft |
| Bolt Hole Circle Diameter | 86.15 mm |
| Paired article numbers | 180918 |
| Min. Length | 522 mm |
| Number of mounting bores | 6 |
| Bore Diameter | 8.55 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 5.482 kg |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
| Additional Information | with grease |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Transmission-side joint diameter | 99.9 mm |
| Wheel Sided Joint Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.07
Important compatibility info
| Weight | 3.758 kg |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Outer diameter | 73 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 85 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.05
Important compatibility info
| Weight | 2.32 kg |
| Outer diameter | 154 mm |
| Thickness | 34 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Replaces | 36890 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (29333)
- 1x Febi Pulley Bolt (33781)
£49.04
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 5.340 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm |
| Thickness | 63.4 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 274 mm |
| Thickness | 24 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 116 mm |
| Centering Diameter | 93 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 5.75 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.03
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 34209 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with rubber mount |
| Weight | 3.372 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (07195)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (34235)
£49.02
Important compatibility info
| Length | 485 mm |
| Height | 46 mm |
| Width | 323 mm |
| Additional Information | with oil drain plug |
| Additional Information 2 | with bolts/screws, with oil sump gasket |
| Filter type | Screen Filter |
| Weight | 0.584 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.02
Important compatibility info
| Minimum thickness | 17 mm |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 60 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 18.5 mm |
| Rim Hole Number | 5 -Hole |
| Weight | 5.540 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.01
Important compatibility info
| Weight | 0.07 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 220 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.01
Important compatibility info
| Type | Tensioner, timing belt |
| Weight | 0.266 kg |
| Width of castor bearing surface | 27 mm |
| Outer diameter | 73 mm |
| Function | Tensioner, timing belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.00
Important compatibility info
| Hole Spacing | 152 mm |
| Weight | 3.007 kg |
| Length | 187 mm |
| Outer diameter | 85 mm |
| Thickness | 54 mm. 76 mm |
| Inner diameter | 21 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 21 mm |
| Type | Repair Kit, control/trailing arm |
| Function | Repair Kit, control/trailing arm |
| Additional Information 2 | with spacer disc, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.00
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Front |
| Weight | 1.542 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.99
Important compatibility info
| Minimum thickness | 9.2 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Perforated, Solid |
| Thickness | 39.8 mm |
| Brake Disc Thickness | 11 mm |
| Outer diameter | 240 mm |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Weight | 3.46 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.95
Important compatibility info
| Outer diameter | 292 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Thickness | 62 mm |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 4.830 kg |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.95
Important compatibility info
| Weight | 0.390 kg |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 142 |
| Additional Information 2 | Requires special tools for mounting |
| Timing Chain Size | G53HP, G53HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.94
Important compatibility info
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Number of Holes | 4 |
| Inner diameter | 24.6 mm |
| Thickness | 71 mm |
| Weight | 1.22 kg |
| Outer diameter | 119.8 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 71 mm |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.94
Important compatibility info
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Weight | 1.947 kg |
| Mounting bores distance | 478 mm |
| Bore Diameter | 14 mm |
| Min. Length | 317 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Function | Shock Absorber |
| Max. Length | 478 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.94
Important compatibility info
| Type | Window Regulator |
| Function | Window Regulator |
| Weight | 1.58 kg |
| Paired article numbers | 175586 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.94
Important compatibility info
| Housing length | 391.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Housing Diameter | 22 mm |
| Eject Force | 670 N |
| Weight | 0.3 kg |
| Length | 627 mm |
| Stroke | 186 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.93
Important compatibility info
| Weight | 0.631 kg |
| Placement on Vehicle | Lower |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.93
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.097 kg |
| Cable Length | 505 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.92
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 4.3 kg |
| Brake caliper piston diameter | 54 mm |
| Material | Cast Iron |
| Paired article numbers | 185997 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.92
Important compatibility info
| Weight | 0.966 kg |
| Placement on Vehicle | Rear Axle Left |
| Material | Rubber/Metal |
| Paired article numbers | 170300 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.92
Important compatibility info
| Brake caliper piston diameter | 54 mm |
| Paired article numbers | 185996 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Weight | 4.3 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.92
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178964 |
| Weight | 2.252 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.91
Important compatibility info
| Weight | 0.228 kg |
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.91
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178965 |
| Weight | 2.252 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.91
Important compatibility info
| Weight | 0.86 kg |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 70 mm. 78 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.90
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Weight | 1.079 kg |
| Function | Interior Blower |
| Rated Power | 200 W |
| Outer diameter | 145 mm |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.89
Important compatibility info
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 110 mm |
| Weight | 0.723 kg |
| Version | alte Ausführung |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Outer diameter | 150 mm |
| Replaced by | 101773 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.89
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1952 mm. 1885 mm |
| Weight | 1.8 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.89
Important compatibility info
| Weight | 0.04 kg |
| Type | Glow Plug |
| Function | Glow Plug |
| Length | 137 mm |
| Voltage | 4.4 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.87
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 0.747 kg |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.87
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.048 kg |
| Cable Length | 414 mm |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.87
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 0.906 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 21910-17000 |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.86
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 1.91 kg |
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.86
Important compatibility info
| Weight | 1.51 kg |
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.85
Important compatibility info
| Weight | 0.402 kg |
| Width | 27 mm |
| Material | Plastic |
| Outer diameter | 64 mm |
| Inner diameter | 23 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Internal Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.85
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Bore Diameter | 12 mm. 15 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.690 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 481 mm |
| Max. Length | 481 mm |
| Min. Length | 304 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.83
Important compatibility info
| Turbocharger line | Charge air cooler to intake manifold |
| Placement on Vehicle | Charge Air Cooler, Left |
| Inner diameter | 65 mm |
| Function | Charge Air Hose |
| Weight | 0.494 kg |
| Type | Charge Air Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.83
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.098 kg |
| Cable Length | 500 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.83
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 49.7 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 12.0 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.83
Important compatibility info
| Brake caliper piston diameter | 48 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 182006 |
| Weight | 4.52 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Weight | 4.90 kg |
| Placement on Vehicle | Lower |
| Length | 368 mm |
| Material | Steel |
| Outer diameter | 206 mm |
| Capacity | 10 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Right |
| Type | Brake Caliper |
| Paired article numbers | 182005 |
| Weight | 4.52 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Paired article numbers | 34655 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.988 kg |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right, Rear |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12379)
£48.82
Important compatibility info
| Weight | 0.6 kg |
| Width | 39.6 mm |
| Operating Mode | Automatic |
| Housing material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.82
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Cable Length | 601 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Weight | 0.07 kg |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.81
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023