Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 0682 747 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Wheel Hub |
| Function | Wheel Hub |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 220 mm |
| Inner diameter | 125 mm |
| Outer diameter | 384 mm |
| Additional Information 2 | without wheel bearing |
| Bolt Hole Circle Diameter | 335 mm |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 595 mm |
| Function | Gas Spring, boot/cargo area |
| Extra Description | febi Plus |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
| Housing Diameter | 37 mm |
| Operating Mode | Electric |
| Stroke | 152 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 502 mm. 820 mm |
| Mounting points diameter | 48 mm. 28 mm |
| Outer diameter | 60 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 318 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cover, driver cab tilt cylinder (40798)
- 1x Febi Cable Tie (07026)
Important compatibility info
| Number of mounting bores | 3 |
| Cable Length | 310 mm |
| Mounting points diameter | 9 mm |
| Function | Solenoid Valve, shift cylinder |
| Type | Solenoid Valve, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please only use the contents of this kit for the following repair!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Camshaft Adjuster (45084)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Bolt, camshaft gear (101125)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 2x Febi Screw (101128)
- 1x Febi Quill, cylinder head (101129)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Shaft Seal, crankshaft (32471)
- 1x Febi Gear/Sprocket, camshaft (105997)
- 1x Febi Sprocket, crankshaft (106144)
- 1x Febi Gasket, timing case cover (102422)
- 1x Febi Pulley Bolt (106509)
- 2x Febi Gasket, timing case (106575)
- 1x Febi Seal Ring, timing chain tensioner (171597)
Important compatibility info
| for OE number | 03C 198 229 B |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (105796)
- 1x Febi Tensioner, timing chain (170392)
- 1x Febi Guide, timing chain (174912)
- 1x Febi Guide, timing chain (173674)
- 1x Febi Gear/Sprocket, camshaft (180446)
- 1x Febi Camshaft Adjuster (171987)
- 1x Febi Sprocket, crankshaft (178344)
- 5x Febi Screw (181202)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 48 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 609 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Bore Diameter | 23 mm |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 7 |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 86 mm |
| Type | Alternator |
| Function | Alternator |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Brake Valve, service brake |
| Distance of fastening bolts | 61 mm |
| Function | Brake Valve, service brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water pump, traction battery |
| Placement on Vehicle | Right Front |
| Type | Water pump, traction battery |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 342 mm |
| Thickness | 65 mm |
| Brake Disc Thickness | 32 mm |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented, two-piece brake disc |
| Minimum thickness | 29.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft Adjuster |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Additional Information 2 | without screw |
| Number of Teeth | 44 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| for OE number | 13028-1KC0A S1 |
| Number of Chain Links | 162 |
| Chain Type | Silent Chain, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49715)
- 1x Febi Tensioner, timing chain (109311)
- 1x Febi Guide, timing chain (178808)
- 1x Febi Guide, timing chain (178544)
- 1x Febi Chain, oil pump drive (100073)
- 1x Febi Chain Tensioner, oil pump drive (109312)
Important compatibility info
| Width | 220 mm |
| Outer diameter | 220 mm |
| Inner diameter | 128 mm |
| Parameter | 3PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 58 0166 0699 |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 110 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain Kit (102440)
- 1x Febi Guide, timing chain (106656)
- 2x Febi Gear/Sprocket, camshaft (178684)
- 1x Febi Impulse generator wheel, camshaft adjustment (184936)
- 1x Febi Sprocket, crankshaft (180240)
- 1x Febi Gear, injection pump (181606)
Important compatibility info
| Width | 27 mm |
| Outer diameter | 126 mm |
| Thickness | 38 mm |
| Number of Teeth | 42 |
| Paired article numbers | 101052 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | with screw |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 600 mm |
| Thickness | 67 mm |
| Inner diameter | 82.5 mm |
| Bolt Hole Circle Diameter | 97 mm |
| Number of Wings | 9 |
| Function | Fan Wheel, engine cooling |
| Type | Fan Wheel, engine cooling |
| for OE number | 366 200 46 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Connecting Rod |
| Function | Connecting Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 335 mm |
| Inner diameter | 145 mm |
| Function | Wheel Hub |
| Placement on Vehicle | Front Axle |
| Width | 369 mm |
| Inner diameter 1 | 160 mm |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 369 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mass Air Flow Sensor |
| Additional Information | With air duct |
| Function | Mass Air Flow Sensor |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Expansion Tank, coolant |
| Length | 460 mm |
| Width | 631 mm |
| Thickness | 180 mm |
| Additional Information | with coolant level sensor, with lids |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Fill quantity | 11 l |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Number of Connectors / Ports | 3 |
| Type | Clutch Booster |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 1 099 874 S5 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (36295)
- 1x Febi Tensioner, timing chain (36296)
- 1x Febi Guide, timing chain (40150)
- 1x Febi Guide, timing chain (36291)
- 1x Febi Guide, timing chain (102199)
- 2x Febi Gear/Sprocket, camshaft (102200)
- 1x Febi Guide, timing chain (102201)
Important compatibility info
| Placement on Vehicle | Exhaust Side, Left, for cylinder 5-8 |
| Inner diameter | 13 mm |
| Number of Teeth | 42 |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| for OE number | 11 36 7 512 182 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Extra Description | febi Plus |
| Stroke | 175 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Placement on Vehicle | Right Rear |
| Length | 659 mm |
| Paired article numbers | 179300 |
| Housing Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter set (172660)
- 1x Febi Urea Filter (107821)
- 1x Febi Air Filter (32267)
- 1x Febi Filter, cabin air (29804)
- 1x Febi Oil Filter (49866)
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Cable Length | 896 mm |
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal, with adjuster |
| Material | Plastic |
| Colour | black |
| Number of Connectors / Ports | 5 |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fitting, intake manifold (175771)
- 1x Febi Control, swirl flaps (induction pipe) (192964)
Important compatibility info
| Type | Air Preparation Unit |
| Function | Air Preparation Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Fuel Pump |
| Number of Teeth | 23 |
| Operating Mode | Mechanical |
| Number of Connectors / Ports | 2 |
| Function | Fuel Pump |
| Material | Steel |
| Internal Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 646 mm |
| Outer diameter | 55 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 300 mm |
| Mounting points diameter | 55 mm. 62 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Minimum thickness | 30 mm |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | perforated/vented, two-piece brake disc |
| Outer diameter | 342 mm |
| Thickness | 65 mm |
| Brake Disc Thickness | 32 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 188 mm |
| Height | 183 mm |
| Width | 183 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| for OE number | 74 21 186 659 S1 |
| Type | Hydraulic Pump, steering |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1783 192 |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Number of Connectors / Ports | 4 |
| Function | Directional Control Valve Block, air suspension |
| Type | Directional Control Valve Block, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with starter motor sprocket |
| for OE number | 51.02301.7434 |
| Number of Teeth | 129 |
| Function | Flywheel |
| Pitch circle diameter, hub | 85 mm |
| Hub internal diameter | 60 mm |
| Number of clutch pressure plate fastening holes | 9 |
| Hub external diameter | 120 mm |
| Running surface internal diameter | 190 mm |
| External diameter, clutch pressure plate | 371 mm |
| Hub fastening hole diameter | 15.0 mm |
| Pitch circle diameter, clutch pressure plate | 368 mm |
| Number of hub fastening holes | 8 |
| Type | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 8 mm |
| Operating pressure to | 12 bar |
| Pulleys | with belt pulley |
| Type | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | black |
| Number of Connectors / Ports | 25 |
| Combi Switch Function | with wipe interval function, with board computer function, with wipe-wash function, with indicator function, with park light function, with high beam function |
| Type | Operating Unit, steering column |
| Function | Operating Unit, steering column |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Valve type | Rotary-knob Valve |
| Type | Control, swirl flaps (induction pipe) |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Front Cover Lock |
| Type | Front Cover Lock |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Max. Length | 858 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Min. Length | 516 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Type | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Number of Chain Links | 70. 86. 48 |
| Timing Chain Size | G68HS, G53HS, G67HR |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49505)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28725)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Timing Chain (49528)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (48770)
- 1x Febi Guide, timing chain (48773)
- 1x Febi Gear, injection pump (101088)
- 1x Febi Oil Jet, timing chain (101919)
- 1x Febi Gear/Sprocket, camshaft (101918)
- 1x Febi Shaft Seal, crankshaft (102041)
- 1x Febi Chain, oil pump drive (36339)
- 1x Febi Sprocket/Gear, oil pump (177918)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 53 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 21.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 732.8 mm |
| Placement on Vehicle | Front |
| Multi-piece | One-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 48 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51.02301.5213 |
| Additional Information | with starter motor sprocket |
| Number of Teeth | 160 |
| Type | Flywheel |
| Function | Flywheel |
| Pitch circle diameter, hub | 88 mm |
| Number of EDC bores/notches | 58 |
| Hub internal diameter | 50 mm |
| Number of clutch pressure plate fastening holes | 12 |
| Hub external diameter | 115 mm |
| External diameter, clutch pressure plate | 475 mm |
| Hub fastening hole diameter | 17 mm |
| Pitch circle diameter, clutch pressure plate | 450 mm |
| Number of hub fastening holes | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














































