Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60.4 mm |
| Outer diameter | 129 mm |
| Inner diameter | 32 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (29383)
- 1x Febi Nut, kingpin (10178)
- 1x Febi Cap, wheel bearing (28502)
£47.41
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with bellow |
| Cable Length | 300 mm |
| Number of circuits | 11 |
| Type | Cable Repair Kit, tailgate |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Rear Axle |
| Length | 131.9 mm |
| Width | 70 mm. 60.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Height | 235 mm |
| Function | Fuel filter |
| Housing material | Metal |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Outer diameter | 108 mm |
| Additional Information 2 | with seal ring |
| Filter type | In-Line Filter, with water drain screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Placement on Vehicle | Lower Front Axle, both sides |
| Length | 119 mm |
| Outer diameter | 50 mm. 64 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05876)
- 1x Febi Bush, kingpin (05877)
- 1x Febi Seal Ring, steering knuckle (05878)
- 1x Febi Circlip (06065)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Lock Ring, steering knuckle (05880)
- 1x Febi Lock Ring, steering knuckle (03813)
- 1x Febi Seal Ring (05881)
£47.39
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 42174 |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| Inner diameter | 40 mm. 52 mm |
| Paired article numbers | 43458 |
| Length | 150 mm |
| Material | Steel |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Placement on Vehicle | Left |
| Internal Thread Size | M56 x 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| Internal Thread Size | M56 x 3 |
| Paired article numbers | 43448 |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Placement on Vehicle | Right |
| Inner diameter | 40 mm. 52 mm |
| Material | Steel |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Length | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| External Thread Size | M16 x 1,5 |
| for OE number | 21634017 |
| Spanner Size | 27 |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| Spanner Size | 22 |
| for OE number | 55 351 836 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Length | 105 mm |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 147 mm |
| Thickness | 83 mm |
| Inner diameter | 32.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Function | Wheel Hub |
| Outer diameter 1 | 45 mm |
| Internal Thread Size | M14 x 1,25 |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| for OE number | 33 41 6 867 262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.38
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 24.5 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Thickness | 90 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Front, Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M12 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| for OE number | 11 35 682 80R |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Upper |
| Material | PE (Polyethylene) |
| Type | Charge Air Hose |
| Hose Length | 430 mm |
| Wall Thickness | 6.5 mm |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Outer diameter | 158 mm |
| Additional Information 2 | with screw |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Thickness | 35 mm |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (36310)
- 1x Febi Ring Gear, crankshaft (36070)
- 1x Febi Pulley Bolt (33675)
£47.37
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1,5 |
| for OE number | 1 099 547 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Paired article numbers | 09151 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023