Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 1063 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Pipe Diameter | 42 mm |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Cone Size | 22 mm |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Pipe Diameter | 42 mm. 81 mm |
| Mounting points diameter | 25 mm |
| Placement on Vehicle | Front |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 335 mm |
| Min. Length | 290 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.75
Important compatibility info
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 108 mm |
| Inner diameter | 8.1 mm |
| Thread Length | 54 mm |
| Thread Type | with left-hand thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.17
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 7 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.55
Important compatibility info
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.15
Important compatibility info
| Max. Length | 338 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 79 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.80
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 48 mm |
| Outer diameter | 62 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.79
Important compatibility info
| Thickness | 94 mm |
| Inner diameter | 42 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter | 143 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.43
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Outer diameter | 175 mm |
| Thickness | 18 mm |
| Inner diameter | 135 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.93
Important compatibility info
| Spanner Size | 27 |
| Number of Connectors / Ports | 4 |
| Function | Sensor, speed |
| Length | 85 mm |
| External Thread Size | M18 x 1,5 |
| Type | Sensor, speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.07
Important compatibility info
| Inner diameter | 81 mm |
| Function | Shaft Seal, wheel hub |
| Material | NBR (nitrile butadiene rubber) |
| Additional Information | with sealing lip |
| Outer diameter | 100 mm |
| Thickness | 10 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.26
Important compatibility info
| Inner diameter | 74 mm |
| Thickness | 9 mm |
| Material | NBR (nitrile butadiene rubber) |
| Additional Information | with sealing lip |
| Placement on Vehicle | Front Axle |
| Type | Shaft Seal, wheel hub |
| Outer diameter | 94 mm |
| Function | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 67.5 mm |
| Width | 58 mm |
| Material | Rubber |
| Inner diameter | 19 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.95
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 200 mm |
| Extra Description | ProKit |
| Rod/Strut | Coupling Rod |
| External Thread Size | M24 x 1,5 |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.36
Important compatibility info
| Hole Spacing | 107 mm |
| Placement on Vehicle | Rear Axle |
| Length | 140 mm |
| Outer diameter | 34 mm |
| Mounting points diameter | 14.5 mm |
| Function | Fastening Bolt, stabiliser bar |
| Type | Fastening Bolt, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.31
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 902 955 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.90
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Length | 220 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.51
Important compatibility info
| Length | 45.8 mm |
| Number of Connectors / Ports | 3 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.51
Important compatibility info
| Inner diameter 2 | 62 mm |
| Function | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 210 mm |
| Material | Thermoplast |
| Inner diameter 1 | 16 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
£12.77
Important compatibility info
| Internal Thread Size | M42 x 1,5 |
| Thickness | 178 mm |
| Pressure | 20 bar |
| Function | Air Dryer Cartridge, compressed-air system |
| Outer diameter | 137 mm |
| Thread Type | with right-hand thread |
| Type | Air Dryer Cartridge, compressed-air system |
| Additional Information 2 | with seal ring, without integrated oil separator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.42
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023