Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44236 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.23
Important compatibility info
| Outer diameter 1 | 72.4 mm |
| Type | Repair Set, retarder |
| Inner diameter 2 | 49 mm |
| Inner diameter 1 | 53.82 mm |
| Function | Repair Set, retarder |
| Outer diameter 2 | 55.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.23
Important compatibility info
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.23
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Function | Sealing Set, air compressor |
| Type | Sealing Set, air compressor |
| Number of screws | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.23
Important compatibility info
| for OE number | B33H-18-861C |
| Spanner Size | 22 |
| Cable Length | 800 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.23
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Spanner Size | 21 |
| Length | 130 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.22
Important compatibility info
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Length | 144 mm |
| Outer diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.21
Important compatibility info
| Paired article numbers | 100107 |
| Length | 395 mm |
| External Thread Size | M14 x 1,5, M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.21
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 355 mm |
| Rod/Strut | Coupling Rod |
| Thickness | 119 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Width | 40 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.21
Important compatibility info
| Minimum thickness | 17 mm |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 60 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 18.5 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.21
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 817 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.21
Important compatibility info
| Placement on Vehicle | Wheel Side |
| Length | 141 mm |
| Outer diameter | 73 mm |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 55.6 mm |
| Internal Teeth, wheel side | 19 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.21
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 502 mm |
| Housing Diameter | 21 mm |
| Eject Force | 470 N |
| Stroke | 195 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.21
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Material | FPM (fluoride rubber) |
| Function | Hand Feed Pump |
| Type | Hand Feed Pump |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.20
Important compatibility info
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Material | Plastic |
| Additional Information 2 | with seal ring |
| Function | Thermostat, coolant |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.20
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Bore Diameter | 12 mm. 15 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 481 mm |
| Max. Length | 481 mm |
| Min. Length | 304 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.20
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 15 mm. 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 641 mm |
| Max. Length | 641 mm |
| Min. Length | 381 mm |
| Pipe Diameter | 47 mm. 38.5 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.20
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Spanner Size | 22 |
| Cable Length | 820 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.19
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 278 mm |
| Thickness | 58 mm |
| Brake Disc Thickness | 9.2 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Mounting points diameter | 15 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.18
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 409 mm |
| Min. Length | 358 mm |
| Pipe Diameter | 41 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.18
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023