Important compatibility info
Width | 43 mm |
Function | Alternator Freewheel Clutch |
Type | Alternator Freewheel Clutch |
Weight | 0.478 kg |
Outer diameter | 55 mm |
Number of Ribs | 6 |
Tightening Torque | 85 Nm |
Additional Information 2 | with lid |
Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.085 kg |
Height | 464 mm |
Outer diameter | 309 mm |
Inner diameter | 180 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 198 mm |
Outer diameter | 106 mm |
External Teeth, Wheel Side | 35 |
Seal Diameter | 71.5 mm |
Internal Teeth, wheel side | 29 |
Weight | 4.1 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M33 x 1,5 |
Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 1200 mm |
Number of Connectors / Ports | 4 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Weight | 0.175 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.10 kg |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 309 mm |
Min. Length | 204 mm |
Pipe Diameter | 51 mm. 40 mm |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Control Type | Rotary Operation |
Number of Connectors / Ports | 10 |
Type | Switch, headlight |
Combi Switch Function | with fog-lamp function |
for OE number | 967 545 11 04 |
Function | Switch, headlight |
Weight | 0.108 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Outer diameter | 120 mm |
Thickness | 75 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 98 mm |
Outer diameter 1 | 37 mm |
Outer diameter 2 | 59 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 730 mm |
Paired article numbers | 106280 |
Number of Connectors / Ports | 2 |
Weight | 0.044 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 415 mm |
Weight | 1.086 kg |
Rod/Strut | Guide Rod |
Placement on Vehicle | Front Axle Right, Front Axle Left, Lower Front Axle |
Additional Information 2 | with ball joint, with rubber mount |
Material | Aluminium |
External Thread Size | M14 x 1,5 |
Function | Rod/Strut, wheel suspension |
Type | Rod/Strut, wheel suspension |
Cone Size | 21.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.705 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 39360 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with rubber mounts |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.83 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30425 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.053 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Cable Length | 620 mm |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Material | Plastic |
Paired article numbers | 192734 |
Colour | Silver |
Weight | 0.35 kg |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.67 kg |
Additional Information 2 | with screw |
Width | 25 mm |
Outer diameter | 153 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32114)
- 1x Febi Pulley Bolt (33675)
Important compatibility info
Extra Description | febi Plus |
Function | Oil Line, charger |
Weight | 0.200 kg |
Type | Oil Line, charger |
Forward- /Backflow | Supply Line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.4 kg |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 12.5 mm |
Mounting points diameter | 12 mm |
Min. Length | 228 mm |
Max. Length | 310 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Pipe Diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, adjuster |
Weight | 0.540 kg |
Type | Repair Kit, adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.289 kg |
Number of Connectors / Ports | 2 |
Cooling Hose | from engine to thermostat |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information 2 | with sensor, with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 174761 |
Cone Size | 16 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.35 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with coolant level sensor |
Function | Expansion Tank, coolant |
Number of Connectors / Ports | 2 |
Material | PA (polyamide) |
Weight | 1.05 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Function | Relay, glow plug system |
Number of Connectors / Ports | 7 |
Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 26 mm |
Inner diameter | 19 mm |
Cooling Hose | from expansion tank to engine cooler and water pipe |
Function | Radiator Hose |
Weight | 0.51 kg |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
for OE number | 50515057 SK |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 484 mm |
Material | Plastic |
Colour | Black |
Function | Holder, coolant compensation tank |
Extra Description | febi Plus |
Weight | 0.300 kg |
Type | Holder, coolant compensation tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with retaining strap, with seal ring |
Weight | 0.242 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), PA (polyamide) |
Cooling Hose | from engine cooler to water pump |
Function | Coolant Pipe |
Extra Description | febi Plus |
Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter, automatic transmission |
Type | Hydraulic Filter, automatic transmission |
Weight | 0.120 kg |
Outer diameter | 58 mm |
Filter type | Filter Insert |
Height | 106 mm |
Additional Information 2 | with lid, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter | 54 mm |
Width | 60 mm |
Outer diameter | 90 mm |
Bearing Type | Tapered Roller Bearing |
Weight | 1.962 kg |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.081 kg |
Function | Tensioner, timing chain |
Width | 45 mm |
Length | 55 mm |
Operating Mode | Hydraulic |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 600 mm |
Number of circuits | 11 |
Function | Cable Repair Set, boot lid |
Extra Description | febi Plus |
Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.16 kg |
Wear Warning Contact | prepared for wear warning indicator |
Placement on Vehicle | Rear Axle |
Length | 123 mm |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17 mm |
Colour | Black |
Inspection Tag | ECE R90 Approved |
Width | 58.2 mm. 59.2 mm |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.058 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1084 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
Function | Control Unit, ignition system |
Number of Connectors / Ports | 4 |
Type | Control Unit, ignition system |
Number of mounting bores | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.71 kg |
Material | Aluminium |
Number of Connectors / Ports | 4 |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.038 kg |
Placement on Vehicle | Rear Axle Left |
Length | 530 mm |
Paired article numbers | 104219 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 455 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.710 kg |
Replaces | 22956 |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.834 kg |
Width | 82 mm |
Outer diameter | 137 mm. 39 mm |
Inner diameter | 29 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 110 mm |
Placement on Vehicle | Front Axle |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 105 °C |
Outer diameter | 35 mm |
Weight | 0.19 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 126 |
Timing Chain Size | G53HP, G53HR |
Function | Timing Chain |
Weight | 0.346 kg |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.557 kg |
Ignition Coil | 2 Spark |
Function | Ignition Coil |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Selector-/Shift Rod |
Length | 493 mm |
Function | Selector-/Shift Rod |
External Thread Size | M10 x 1,5 |
Additional Information 2 | with angled ball joint |
Weight | 0.6 kg |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Outer diameter | 32.5 mm |
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | Plastic |
Inner diameter | 6.98 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, intake manifold pressure |
Type | Sensor, intake manifold pressure |
Additional Information 2 | with seal ring |
for OE number | 13 61 7 787 142 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 675 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.040 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear |
Paired article numbers | 33575 |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Thickness | 61 mm |
Outer diameter | 82 mm. 66 mm |
Width | 189 mm |
Length | 117 mm |
Type | Mounting, control/trailing arm |
Weight | 1.985 kg |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (22438)
Important compatibility info
Function | Cable Repair Kit, tailgate |
Paired article numbers | 107047 |
Cable Length | 1250 mm |
Number of circuits | 7 |
Placement on Vehicle | Right |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
for door opening angle | 270 ° |
Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.280 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Outer diameter | 107 mm |
Inner diameter | 74 mm |
Number of Teeth, ABS ring | 52 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Weight | 0.161 kg |
Function | Valve, crankcase ventilation |
Extra Description | febi Plus |
Additional Information | with gasket/seal |
Type | Valve, crankcase ventilation |
for OE number | 06F 129 101 R S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (46518)
- 1x Febi Gasket, crankcase ventilation (44481)
Important compatibility info
Spanner Size | 22 |
Weight | 0.001 kg |
Cable Length | 370 mm |
Number of circuits | 4 |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Type | Oxygen Sensor |
Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.35 kg |
Additional Information 2 | with screw |
Width | 33 mm |
Outer diameter | 153 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26334)
- 1x Febi Pulley Bolt (33781)
Important compatibility info
Minimum thickness | 7.3 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Weight | 4.006 kg |
Brake Disc Thickness | 9 mm |
Thickness | 57.7 mm |
Outer diameter | 278 mm |
Placement on Vehicle | Rear Axle |
Rotor Style | Solid |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023