Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.430 kg |
| Function | Oil Pump |
| Additional Information 2 | with gear |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£192.75
Important compatibility info
| Additional Information 2 | with bolts/screws, with spacer plate |
| Weight | 3.65 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£192.72
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 81 mm |
| External Teeth, Wheel Side | 31 |
| Weight | 7.336 kg |
| Function | Drive Shaft |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 89 mm |
| Min. Length | 840 mm |
| External Teeth, Diff.Side | 27 |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£191.86
Important compatibility info
| Additional Information | with starter motor sprocket |
| Number of Teeth | 130 |
| Weight | 22.578 kg |
| for OE number | 51.02301.5109 |
| Type | Flywheel |
| Function | Flywheel |
| Pitch circle diameter, hub | 85 mm |
| Hub internal diameter | 60 mm |
| Number of clutch pressure plate fastening holes | 9 |
| Hub external diameter | 122 mm |
| Running surface internal diameter | 190 mm |
| External diameter, clutch pressure plate | 389 mm |
| Hub fastening hole diameter | 15.0 mm |
| Pitch circle diameter, clutch pressure plate | 375 mm |
| Number of hub fastening holes | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£191.82
Important compatibility info
| Weight | 3.4 kg |
| Type | Clutch, radiator fan |
| Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£191.80
Important compatibility info
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Wishbone Angle Measurement | 49 ° |
| Outer diameter | 56 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 20.074 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£191.63
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 489 mm |
| Min. Length | 309 mm |
| Pipe Diameter | 70 mm. 60 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 4.63 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£191.55
Important compatibility info
| Weight | 7.3 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 715 mm |
| Min. Length | 438 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£191.55
Important compatibility info
| Stroke | 515 mm |
| Number of Connectors / Ports | 2 |
| Weight | 5.6 kg |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Function | Tilt Cylinder, driver cab |
| Mounting points diameter | 20 mm |
| Length | 668 mm |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£191.22
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41081 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 10.0 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut, with sleeves |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£190.81
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023